South African Class 10C 4-6-2

The South African Railways Class 10C 4-6-2 of 1910 was a steam locomotive from the pre-Union era in Transvaal.

CSAR Class 10-C 4-6-2
South African Class 10C & 10CR 4-6-2
Class 10CR no. 778 passing Woltemade No. 4, near present-day Thornton, c. 1940
Type and origin
♠ Class 10C as built with a Belpaire firebox
Class 10C, superheated
Class 10CR rebuilt with a Watson Standard boiler
ʘ Type XC tender - ʘ Type XM2 tender
Power typeSteam
DesignerCentral South African Railways
(G.G. Elliot)
BuilderNorth British Locomotive Company
Serial number19195-19206
ModelCSAR Class 10-C
Build date1910
Total produced12
Specifications
Configuration:
  Whyte4-6-2 (Pacific)
  UIC♠ 2'C1'n2 - 2'C1'h2
Driver2nd coupled axle
Gauge3 ft 6 in (1,067 mm) Cape gauge
Leading dia.28 12 in (724 mm)
Coupled dia.57 in (1,448 mm)
Trailing dia.33 in (838 mm)
Tender wheelsʘʘ 33 12 in (851 mm) as built
ʘʘ 34 in (864 mm) retyred
Wheelbase52 ft 4 12 in (15,964 mm)
  Engine28 ft 7 12 in (8,725 mm)
  Leading6 ft (1,829 mm)
  Coupled10 ft (3,048 mm)
  Tenderʘ 14 ft 7 in (4,445 mm)
ʘ 16 ft 9 in (5,105 mm)
  Tender bogieʘʘ 4 ft 7 in (1,397 mm)
Length:
  Over couplersʘ 59 ft 34 in (18,002 mm)
ʘ 62 ft 9 in (19,126 mm)
Height 12 ft 10 in (3,912 mm)
12 ft 11 in (3,937 mm)
Axle load♠ 14 LT (14,220 kg)
14 LT 14 cwt (14,940 kg)
15 LT 6 cwt (15,550 kg)
  Leading♠ 11 LT 11 cwt (11,740 kg)
13 LT 12 cwt (13,820 kg)
15 LT 6 cwt (15,550 kg)
  Coupled♠ 14 LT (14,220 kg)
  1st coupled 13 LT 19 cwt (14,170 kg)
14 LT 14 cwt (14,940 kg)
  2nd coupled 14 LT 14 cwt (14,940 kg)
15 LT 6 cwt (15,550 kg)
  3rd coupled 14 LT 2 cwt (14,330 kg)
14 LT 14 cwt (14,940 kg)
  Trailing♠ 11 LT 4 cwt (11,380 kg)
11 LT 15 cwt (11,940 kg)
12 LT 6 cwt (12,500 kg)
  Tender bogieBogie 1:
ʘ 17 LT (17,270 kg)
ʘ 24 LT 4 cwt (24,590 kg)
Bogie 2:
ʘ 17 LT 16 cwt (18,090 kg)
ʘ 25 LT 3 cwt (25,550 kg)
  Tender axleʘ 8 LT 18 cwt (9,043 kg)
ʘ 12 LT 11 cwt 2 qtr (12,780 kg)
Adhesive weight♠ 42 LT (42,670 kg)
42 LT 15 cwt (43,440 kg)
44 LT 14 cwt (45,420 kg)
Loco weight♠ 64 LT 15 cwt (65,790 kg)
68 LT 2 cwt (69,190 kg)
72 LT 6 cwt (73,460 kg)
Tender weightʘ 34 LT 16 cwt (35,360 kg)
ʘ 49 LT 7 cwt (50,140 kg)
Total weight♠ʘ 99 LT 11 cwt (101,100 kg)
ʘ 114 LT 2 cwt (115,900 kg)
ʘ 102 LT 18 cwt (104,600 kg)
ʘ 117 LT 9 cwt (119,300 kg)
ʘ 121 LT 13 cwt (123,600 kg)
Tender typeXC (2-axle bogies)
XM2 (2-axle bogies)
XC, XC1, XD, XE, XE1, XF, XF1, XF2, XJ, XM, XM1, XM2, XM3, XM4, XP1, XS permitted
Fuel typeCoal
Fuel capacityʘ 5 LT (5.1 t)
ʘ 10 LT (10.2 t)
Water capʘ 2,600 imp gal (11,800 l)
ʘ 4,000 imp gal (18,200 l)
GeneratorPyle National turbo-generator
Firebox typeBelpaire - Round-top
  Firegrate area 32 sq ft (3.0 m2)
36 sq ft (3.3 m2)
Boiler:
  Model Watson Standard no. 1
  Pitch 7 ft 4 in (2,235 mm)
8 ft (2,438 mm)
  Diameter 4 ft 8 14 in (1,429 mm)
5 ft (1,524 mm)
  Tube plates 16 ft 6 12 in (5,042 mm)
17 ft 9 in (5,410 mm)
  Small tubes183: 2 14 in (57 mm)
100: 2 14 in (57 mm)
76 2 12 in (64 mm)
  Large tubes 18: 5 12 in (140 mm)
24: 5 12 in (140 mm)
Boiler pressure 200 psi (1,379 kPa)
Safety valve Ramsbottom
Pop
Heating surface♠ 1,905 sq ft (177.0 m2)
1,525 sq ft (141.7 m2)
1,620 sq ft (151 m2)
  Tubes♠ 1,783 sq ft (165.6 m2)
1,403 sq ft (130.3 m2)
1,497 sq ft (139.1 m2)
  Firebox 122 sq ft (11.3 m2)
123 sq ft (11.4 m2)
Superheater:
  Heating area 345 sq ft (32.1 m2)
366 sq ft (34.0 m2)
CylindersTwo
Cylinder size 18 in (457 mm) bore
26 in (660 mm) stroke
Valve gearWalschaerts
Valve typePiston
CouplersJohnston link-and-pin
AAR knuckle (1930s)
Performance figures
Tractive effort 22,170 lbf (98.6 kN) @ 75%
Career
OperatorsCentral South African Railways
South African Railways
ClassCSAR Class 10-C, SAR Class 10C
Number in class12
NumbersCSAR 1003-1014, SAR 767-778
Delivered1910-1911
First run1910
Withdrawn1973

In 1910, the Central South African Railways placed twelve Class 10-C 4-6-2 Pacific type steam locomotives in service. In 1912, these locomotives were renumbered and designated Class 10C on the South African Railways roster.[1][2][3][4]

Manufacturer

In November and December 1910, twelve light 4-6-2 Pacific type passenger locomotives were placed in service by the Central South African Railways (CSAR). Designed by G.G. Elliot, Chief Mechanical Engineer (CME) of the CSAR, they were built along similar lines to the Class 10-2 which had been delivered to the CSAR earlier in that same year, but they were slightly smaller and had smaller coupled wheels.[1][2][3]

G.G. Elliot

They were built for the CSAR by the North British Locomotive Company (NBL) and were designated Class 10-C, numbered in the range from 1003 to 1014. As built, they used saturated steam and had Belpaire fireboxes and Walschaerts valve gear.[1][3][5][6]

They embodied some of the features of their larger Class 10-2 superheated predecessors, with the notable exceptions of the feedwater heaters and superheating. They were also fitted with the Flaman speed recorder, of which the driving gear was connected to the right trailing crank pin. A new feature was the placing of the Pyle National turbo-generator unit behind the dome on top of the boiler barrel.[2]

Tenders

Since they were originally intended for local passenger work around the Reef, the locomotives had been delivered with comparatively small Type XC tenders with a coal capacity of 5 long tons (5.1 tonnes) and 2,600 imperial gallons (11,800 litres) of water.[1]

Their outside-admission piston valves with straight-ported cylinders made them extraordinarily free runners and they were soon found suitable for the mainline as well. To better equip them to handle mainline passenger trains, an order for new larger Type XM2 tenders was placed with Robert Stephenson and Company. Since the original tenders were already numbered for their respective engines, the new tenders, with works numbers D1540/1 to D1540/12, were numbered N1 to N12. They had a coal capacity of 10 long tons (10.2 tonnes) and 4,000 imperial gallons (18,200 litres) of water.[1][7]

In March 1922, one of these engines, no. 775 with a new Type XM2 tender, worked a special Johannesburg-Cape Town fast passenger train over the Klerksdorp-Kimberley section. The locomotive covered the 182 miles (293 kilometres) with the 320 long tons (325 tonnes) train in 5 hours 55 minutes, including 34 minutes which were lost taking water and attending to a hot-running big-end bearing, attaining an average speed of 33.75 miles per hour (54 kilometres per hour). This was a creditable performance for a comparatively small locomotive with only 57 inches (1,448 millimetres) coupled wheels and which, at the time, was not yet superheated.[1]

Superheating

With the new larger tenders, the locomotives were therefore put to work on the Kimberley-Klerksdorp line. To enhance their performance in their new role as mainline locomotives, they were soon reboilered and equipped with superheaters, but they retained their Class 10C classification.[1]

South African Railways

When the Union of South Africa was established on 31 May 1910, the three Colonial government railways (Cape Government Railways, Natal Government Railways and CSAR) were united under a single administration to control and administer the railways, ports and harbours of the Union. Although the South African Railways and Harbours came into existence in 1910, the actual classification and renumbering of all the rolling stock of the three constituent railways were only implemented with effect from 1 January 1912.[4][8]

In 1912, these locomotives were renumbered in the range from 767 to 778 and designated Class 10C on the South African Railways (SAR).[1]

Watson standard boilers

In the 1930s, many serving locomotives were reboilered with a standard boiler type, designed by then CME A.G. Watson as part of his standardisation policy. Such Watson Standard reboilered locomotives were reclassified by adding an "R" suffix to their classification.[3][9]

All but two of the Class 10C locomotives, numbers 772 and 776, were eventually reboilered with Watson Standard no. 1 boilers and reclassified to Class 10CR.[3][7][9]

Their original boilers were fitted with Ramsbottom safety valves, while the Watson Standard boilers were fitted with Pop safety valves. An obvious difference between an original and a Watson Standard reboilered locomotive is usually a rectangular regulator cover, just to the rear of the chimney on the reboilered locomotive. In the case of the Class 10CR locomotives, an even more obvious difference was the absence of the Belpaire firebox hump between the cab and boiler on the reboilered locomotives.[9]

Service

When the Kimberley-Klerksdorp line was eventually relaid with heavier rails, the Class 10CR were displaced by larger and more powerful locomotives and transferred to Cape Town, where most of them worked the local inter-urban services. Part of their duties was to haul the weekly mail trains between the East Pier and Monument Station. On Fridays, the Union-Castle Line’s mailship berthed at the East Pier, from where mail trains to Transvaal and Rhodesia would depart. A shunting engine would bring these carriages from the pier via Dock Road to Monument Station, where the mainline locomotive, dining saloon, kitchen car and carriages for local passengers would be attached. They remained in this service until they were later relegated to shunting and goods pickup work for the rest of their years.[1][3][7]

The two Class 10C locomotives went to Bloemfontein to assist with shunting. After the entire Class was withdrawn in 1973, no. 771 was sold to Lorraine gold mine in the Free State. After being retired from mine service, it was obtained by Sandstone Estates for restoration in 2011.[3]

Works numbers

The table lists the locomotive and tender works numbers, the CSAR to SAR renumbering and the tender numbers for the Class 10C and 10CR locomotives.[1]

Illustration

The main picture shows Watson Standard reboilered Class 10CR no. 778, with a large dome cover, passing through Woltemade No. 4 near Cape Town, c. 1930. Woltemade No. 4 no longer exists and was located between the present-day Thornton and Goodwood stations on the line from Cape Town to Bellville. The pictures illustrate the differences in the appearance of the locomotives over their lifespan.

References

  1. Holland, D. F. (1972). Steam Locomotives of the South African Railways. 2: 1910-1955 (1st ed.). Newton Abbott, Devon: David & Charles. pp. 14–17, 140. ISBN 978-0-7153-5427-8.
  2. Espitalier, T.J.; Day, W.A.J. (1945). The Locomotive in South Africa - A Brief History of Railway Development. Chapter VII - South African Railways. South African Railways and Harbours Magazine, April 1945. pp. 274-275.
  3. Paxton, Leith; Bourne, David (1985). Locomotives of the South African Railways (1st ed.). Cape Town: Struik. p. 53. ISBN 0869772112.
  4. Classification of S.A.R. Engines with Renumbering Lists, issued by the Chief Mechanical Engineer's Office, Pretoria, January 1912, pp. 9, 12, 15, 35 (Reprinted in April 1987 by SATS Museum, R.3125-6/9/11-1000)
  5. Durrant, A. E. (1989). Twilight of South African Steam (1st ed.). Newton Abbott, London: David & Charles. p. 10. ISBN 0715386387.
  6. North British Locomotive Company works list, compiled by Austrian locomotive historian Bernhard Schmeiser
  7. Soul of A Railway - System 1 – Part 1: Cape Town prior to the Second World War - Caption 5. (Accessed on 26 November 2016)
  8. The South African Railways - Historical Survey. Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd., Published c. 1978, p. 25.
  9. South African Railways and Harbours Locomotive Diagram Book, 2'0" & 3'6" Gauge Steam Locomotives, 15 August 1941, p13, as amended
External video
South African Steam: 10CR & 19D Loraine Gold Mine Open Day August 1997 Class 10CR no. 771 and Class 19D numbers 2765 and 3369, working at the Lorraine Gold Mine in the Free State, August 1997. (Time 8:42)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.