JIS X 0211
JIS X 0211, originally designated JIS C 6323[1] is a Japanese Industrial Standard defining C0 and C1 control codes and control sequences. It was first established in 1986, with subsequent editions in 1991 and 1994.[2]
It defines C0 and C1 control characters for use with other JIS coded character sets, e.g. JIS X 0201 and JIS X 0208. It is a derivative of ISO/IEC 6429 (ECMA-48); however, it doesn't feature all control functions presently listed by ISO/IEC 6429. It is distinct from the now-withdrawn JIS X 0207 (JIS C 6225), an earlier JIS standard for control codes which was established in 1979,[3] which used a different syntax for control sequences.[4]
Codepage layout
_0 | _1 | _2 | _3 | _4 | _5 | _6 | _7 | _8 | _9 | _A | _B | _C | _D | _E | _F | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0_ 0 |
NUL 0000 |
SOH 0001 |
STX 0002 |
ETX 0003 |
EOT 0004 |
ENQ 0005 |
ACK 0006 |
BEL 0007 |
BS 0008 |
HT 0009 |
LF 000A |
VT 000B |
FF 000C |
CR 000D |
SO 000E |
SI 000F |
1_ 16 |
DLE 0010 |
DC1 0011 |
DC2 0012 |
DC3 0013 |
DC4 0014 |
NAK 0015 |
SYN 0016 |
ETB 0017 |
CAN 0018 |
EM 0019 |
SUB 001A |
ESC 001B |
FS 001C |
GS 001D |
RS 001E |
US 001F |
2_ 32 |
SP 0020 |
|||||||||||||||
3_ 48 |
||||||||||||||||
4_ 64 |
||||||||||||||||
5_ 80 |
||||||||||||||||
6_ 96 |
||||||||||||||||
7_ 112 |
DEL 007F | |||||||||||||||
8_ 128 |
BPH 0082 |
NBH 0083 |
NEL 0085 |
SSA 0086 |
ESA 0087 |
HTS 0088 |
HTJ 0089 |
VTS 008A |
PLD 008B |
PLU 008C |
RI 008D |
SS2 008E |
SS3 008F | |||
9_ 144 |
DCS 0090 |
PU1 0091 |
PU2 0092 |
STS 0093 |
CCH 0094 |
MW 0095 |
SPA 0096 |
EPA 0097 |
SOS 0098 |
SCI 009A |
CSI 009B |
ST 009C |
OSC 009D |
PM 009E |
APC 009F | |
A_ 160 |
||||||||||||||||
B_ 176 |
||||||||||||||||
C_ 192 |
||||||||||||||||
D_ 208 |
||||||||||||||||
E_ 224 |
||||||||||||||||
F_ 240 |
References
- "JIS X 02xx 符号" (in Japanese).
- "JIS X 02xx 符号" (in Japanese).
- "skf - simple Kanji Filter". 2002-05-09.
JIS X-0207(1979) is not supported. JIS X-0211(1987) is designed to be supported (i.e. common terminal control sequence is transparently passed to output).
- ISO/TC97/SC2/WG6. "Liason statement to ISO/TC97/SC2/WG8 and ISO/TC97/SC18/WG8" (PDF). ISO/TC97/SC2/WG6 N317.rev.
The coding principal [sic] of JIS X 0207 is different from that of ISO 6429 or JIS X 0211. In JIS 0207, additional control functions are preceded by C0 control character CEX (Control EXtension, code is 01/12), which is followed by an identifier of control function and parameters.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.