Summerville Formation

The Summerville Formation is a geological formation in New Mexico, Colorado, and Utah of the Southwestern United States. It dates back to the Oxfordian stage of the Late Jurassic.[1]

Summerville Formation
Stratigraphic range: Oxfordian
161–151 Ma
Summerville Formation in road cut west of Hanksville, Utah
TypeGeological formation
Unit ofSan Rafael Group
Sub-unitsBluff Sandstone
UnderliesMorrison Formation
OverliesTodilto & Curtis Formations
Thickness100 m (330 ft)
Lithology
PrimaryMudstone, sandstone
OtherGypsum
Location
Coordinates39.216°N 110.544°W / 39.216; -110.544
Approximate paleocoordinates31.9°N 54.7°W / 31.9; -54.7
RegionFour Corners,
(Southwestern United States)
Country United States
ExtentHenry Mountains, Paradox Basin
Type section
Named forSummerville Point, Emery County, Utah
Named byJames Gilluly & J.B. Reeside Jr.
Year defined1928

Summerville Formation outcrops in Utah, Colorado and New Mexico

Description
Summerville Formation with gypsum-filled cracks. U.S. quarter dollar for scale.

The formation consists of up to 100 meters (330 ft) of red mudstone, with thin interbeds of green and red sandstone. The lower portion of the formation shows polygonal desiccation cracks and localized salt-hopper casts while the upper portion contains considerable gypsum, consistent with deposition in a sabkha on the margin of the Sundance Sea.It is exposed in the San Rafael Reef, the Waterpocket Fold, in the Henry Mountains, with additional exposures scattered across the region from the San Rafael Reef to the Paradox Basin,[2] and in north-central New Mexico.[3] The thin bedding is characteristic throughout the formation, but gypsum is not found in the San Juan Basin and some conglomerate is found on the south and southwestern margins of the formation.[4] The correlation of late Jurassic beds in northwestern New Mexico with the Summerville Formation in Utah has been questioned, and it has been suggested that they be assigned to the Beclabito Formation instead.[5]

The Summerville Formation rests conformably on the underlying Curtis Formation (Utah and western Colorado) or Todilto Formation (southwest Colorado and New Mexico) but is separated from the overlying Morrison Formation by the regional J5 unconformity.[1] It thins significantly in the Moab-La Sal area, the likely area of the divide between the marine Curtis basin to the northwest and the salina lake Todilto basin to the southeast. Here the formation is just 1.2 meters (3.9 feet) thick and rests directly on Entrada Sandstone. In many locations the Summerville is separated from the Morrison by eolian sandstones, such as the Bluff Sandstone, variously assigned to the Morrison Formation or the San Rafael Group. The Morrison Formation represents a return to more humid conditions with increased clastic input.[6]

The Bell Ranch Formation of northeastern New Mexico is correlative with the Summerville Formation.[7]

The Summerville Formation is interpreted as recording a regression of the Sundance Sea to the north, with simultaneous infilling of both the Curtis and Todilto basins. This produced a depositional environment of very low relief, in which occasional encroachments of eolian sand during times of drought were subsequently worked into thin strata by wave action in ephemeral saline lakes.[6]

Fossil content

The formation is almost completely lacking in body fossils.[8] However, theropod tracks were found in the formation in Utah, New Mexico, and Colorado.[9]

Avemetatarsalians
Avemetatarsalians of the Summerville Formation
GenusSpeciesLocationStratigraphic positionMaterialNotesImages
Dystrophaeus[9] D. viaemalae[9] Utah[9] "Scapula, ulna, partial radius, [and] partial manus."[10] A eusauropodan dinosaur
Camarasaurus Indeterminate New Mexico Later found to be indeterminate sauropod remains[9]
Pteraichnus[11] P. saltwashensis[11] Arizona[11] Pterosaur trackways. Includes the P. saltwashensis type locale.[11] Specimens housed at the University of Utah.[11] These tracks may actually be from the Morrison Formation.[11]
Indeterminate Arizona, near Summerville[11] Also present in Colorado (Cactus Park, Furnish Canyon, Colorado National Monument) and Utah (Delmonte Mines, Starr Springs, Flaming Gorge, Ferron, Moab, Duchesne County).[11] Summerville, Furnish Canyon, Cactus Park, Delmonte Mines, Starr Springs, Ferron, and Moab specimens are housed in the University of Colorado's Dinosaur Tracks Museum in Denver.[11] The Flaming Gorge and Colorado National Monument tracks remains in the field.[11] Ferron specimens are also housed at the University of Utah.[11]
Color key
Taxon Reclassified taxon Taxon falsely reported as present Dubious taxon or junior synonym Ichnotaxon Ootaxon Morphotaxon
 Notes
Uncertain or tentative taxa are in small text; crossed out taxa are discredited.

History of investigation

The formation was first defined in 1928 for exposures in the San Rafael Reef.[2] Similar beds in northeastern Arizona and the San Juan Basin are assigned to the Wanakah Formation,[12] but continue to be assigned to the Summerville Formation in north-central New Mexico.[7][3]

See also
  • List of dinosaur-bearing rock formations
  • Geologic formations of the United States

Footnotes
  1. Wilcox 2007
  2. Gilluly and Reeside, 1927
  3. Koning and Read 2010
  4. Lucas and Anderson 1992, p.81
  5. Cather, Steven M. (2020). "Jurassic stratigraphic nomenclature for northwestern New Mexico" (PDF). New Mexico Geological Society Special Publication. 14: 145–151. Retrieved 31 October 2020.
  6. Lucas and Anderson 1992, p.80
  7. Lucas and Anderson 1992
  8. Lucas and Anderson 1992, p.84
  9. Weishampel 2004
  10. "Table 13.1," in Weishampel, et al. (2004). Page 261.
  11. Lockley et al. 2008
  12. Condon et al. 1988

References
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.