Shiobara Pumped Storage Plant

The Shiobara Pumped Storage Power Station (塩原発電所) is a pumped-storage hydroelectric power station in Nasushiobara, in the Tochigi Prefecture of Japan. It has a total installed capacity of 900 megawatts (1,200,000 hp). The power plant started operation in 1994.[2]

Shiobara Pumped Storage Power Station
View of the Sabigawa Dam
CountryJapan
LocationNasushiobara, Tochigi Prefecture
Coordinates36°59′44″N 139°52′07″E
StatusOperational
Opening date1994
Operator(s)TEPCO
Upper reservoir
Total capacity11,900,000 m3 (9,600 acre⋅ft)[1]
Lower reservoir
Total capacity10,500,000 m3 (8,500 acre⋅ft)[1]
Power Station
Hydraulic head338 m (1,109 ft)[1]
Pump-generators3 x 300 MW
Installed capacity900 MW (1,200,000 hp)

Like most pumped-storage facilities, the power station uses two reservoirs, releasing and pumping as the demand rises and falls. The upper reservoir is contained by the Yashio Dam, a rock-fill dam. The lower reservoir is contained by the Sabigawa Dam, a concrete gravity dam.[1][3]

The power station employs three 300 MW pumping/generation units. The first 2 units started operation on 24 June 1994 and the third unit was started on 16 June 1995.[4]

See also

Notes

  1. "Case Study 11-02: Benefits due to Power Generation – Large Scale Pumped Storage Power Plants, Japan" (PDF). IEA Hydropower Implementing Agreement Annex VIII. Archived from the original (PDF) on 24 September 2015. Retrieved 20 November 2015.
  2. "Shiobara Pumped Hydro Power Station". DOE Global Energy Storage Database. US Department of Energy (DOE). Retrieved 20 November 2015.
  3. "Press Release - Water Pumping of The Shiobara Power Station for Urgent and Temporary Useand Asking Our Customers for More Electricity Conservation". www.tepco.co.jp. TEPCO. Retrieved 20 November 2015.
  4. "Special Note on Power Generation Facility". TEPCO. Retrieved 20 November 2015.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.