route (command)

In computing, route is a command used to view and manipulate the IP routing table in Unix-like and Microsoft Windows[1] operating systems and also in IBM OS/2 and ReactOS.[2] Manual manipulation of the routing table is characteristic of static routing.

For other uses of "route", see Route (disambiguation).

route
The ReactOS route command
Developer(s)Fred N. van Kempen, Microsoft, IBM, ReactOS Contributors
Operating systemUnix-like, OS/2, Microsoft Windows, ReactOS
PlatformCross-platform
TypeCommand
LicenseOS/2, Windows: Proprietary commercial software
ReactOS: GPLv2

Implementations

Unix and Unix-like

In Linux distributions based on 2.2.x Linux kernels, the ifconfig and route commands are operated together to connect a computer to a network, and to define routes between computer networks. Distributions based on later kernels have deprecated ifconfig and route, replacing them with iproute2. Route for Linux was originally written by Fred N. van Kempen.[3]

Syntax

The command-syntax is:

route [-nNvee] [-FC] [<AF>]           List kernel routing tables
route [-v] [-FC] {add|del|flush} ...  Modify routing table for AF.
route {-h|--help} [<AF>]              Detailed usage syntax for specified AF.
route {-V|--version}                  Display version/author and exit.

Example

 
user@linux:~$ route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.101.0   192.168.102.102 255.255.255.0   UG    0      0        0 eth0
192.168.102.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.103.0   192.168.102.102 255.255.255.0   UG    0      0        0 eth0
192.168.12.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0
0.0.0.0         192.168.12.1    0.0.0.0         UG    0      0        0 eth0

Microsoft Windows

The command is only available if the TCP/IP protocol is installed as a component in the properties of a network adapter.

Syntax

The command-syntax is:

route [-f] [-p] [-4|-6] [Command [Destination] [mask Netmask] [Gateway] metric Metric if Interface

Parameters
  • -f: Clears the routing table
  • -p: The route is added to the Windows Registry and is used to initialize the IP routing table whenever the TCP/IP protocol is started (only when used with the add command)
  • Command: The command to run (add, change, delete, print)
  • -4: Force using IPv4
  • -6: Force using IPv6
  • Destination: Network destination of the route
  • mask Netmask: The netmask (subnet mask) associated with the network destination
  • Gateway: The forwarding or next hop IP address over which the set of addresses defined by the network destination and subnet mask are reachable
  • metric Metric: Integer cost metric (ranging from 1 to 9999) for the route
  • if Interface: The index of the interface over which the destination is reachable
  • /?: Command help

The -p parameter is only supported on Windows NT 4.0, Windows 2000, Windows Millennium Edition, and Windows XP. It is not supported on Windows 95 or Windows 98.

Syntax

The command-syntax is:

route [-nqv] [COMMAND] [[MODIFIERS] args]

Parameters
  • -n: Bypasses translating IP addresses to symbolic host names
  • -q: Suppresses all output
  • -v: Verbose
  • COMMAND: The command to run (add, delete, change, get, monitor, flush)
  • -net: <dest> is a network address
  • -host: <dest> is host name or address (default)
  • -netmask: the mask of the route
  • <dest>: IP address or host name of the destination
  • <gateway>: IP address or host name of the next-hop router

Syntax

Print the route table:

route print

Add a route:

route add <target> [mask <mask>] <gw> [metric <m>]

Delete a route:

route delete <target> <gw>

See also

Further reading
  • Stanek, William R. (2004). Microsoft Windows Command-Line Administrator's Pocket Consultant. ISBN 0-735-62038-5.
  • John Paul Mueller (2007). Windows Administration at the Command Line for Windows Vista, Windows 2003, Windows XP, and Windows 2000. John Wiley & Sons. ISBN 978-0470165799.

References
  1. Adding a TCP/IP Route to the Windows Routing Table
  2. https://github.com/reactos/reactos/blob/master/base/applications/network/route/route.c
  3. https://linux.die.net/man/8/route
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.