Rhenium diboride

Rhenium diboride (ReB2) is a synthetic superhard material. It was first synthesized in 1962 [3] and re-emerged recently due to hopes of achieving high hardness comparable to that of diamond.[4] The reported ultrahigh hardness has been questioned,[5] although this is a matter of definition as in the initial test rhenium diboride was able to scratch diamond.[4]

Rhenium diboride
Names
IUPAC name
Rhenium diboride
Identifiers
3D model (JSmol)
EC Number
  • 234-959-3
Properties
ReB2
Molar mass 207.83 g/mol
Appearance black powder
Density 12.7 g/cm3
Melting point 2,400 °C (4,350 °F; 2,670 K)[1]
none
Structure
Hexagonal, Space group P63/mmc.
Hazards
GHS pictograms [2]
GHS Signal word Warning[2]
H315, H319, H335[2]
P261, P280, P305+351+338, P304+340, P405, P501[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

The production method of this material does not involve high pressures as with other hard synthetic materials, such as cubic boron nitride, which makes production cheap. However, rhenium itself is an expensive metal.

The compound is formed from a mixture of rhenium, noted for its resistance to high pressure, and boron, which forms short, strong covalent bonds with rhenium.

Synthesis
Rhenium diboride, ReB2

ReB2 can be synthesized by at least three different methods at standard atmospheric pressure: solid-state metathesis, melting in an electric arc, and direct heating of the elements.[4]

In the metathesis reaction, rhenium trichloride and magnesium diboride are mixed and heated in an inert atmosphere and the magnesium chloride byproduct is washed away. Excess boron is needed to prevent formation of other phases such as Re7B3 and Re3B.

In the arc-melting method, rhenium and boron powders are mixed and a large electric current is passed through the mixture, also in an inert atmosphere.

In the direct reaction method, the rhenium-boron mixture is sealed in a vacuum and held at a high temperature over a longer period (1000 °C for five days).

At least the last two methods are capable of producing pure ReB2 without any other phases, as confirmed by X-ray crystallography.

Properties

The hardness of ReB2 exhibits considerable anisotropy because of its hexagonal layered structure (see structure model), being greatest along the c axis. In contrast to the scratch hardness test, its indentation hardness (HV ~ 22 GPa)[5] is much lower than that of diamond and is comparable to that of tungsten carbide, silicon carbide, titanium diboride or zirconium diboride.[5]

ReB2 slowly reacts with water, converting into a hydroxide.

Two factors contribute to the high hardness of ReB2: a high density of valence electrons, and an abundance of short covalent bonds.[4][6] Rhenium has one of the highest valence electron densities of any transition metal (476 electrons/nm3, compare to 572 electrons/nm3 for osmium and 705 electrons/nm3 for diamond[7]). The addition of boron requires only a 5% expansion of the rhenium lattice, because the small boron atoms fill the existing spaces between the rhenium atoms. Furthermore, the electronegativities of rhenium and boron are close enough (1.9 and 2.04 on the Pauling scale) that they form covalent bonds in which the electrons are shared almost equally.

See also

References
  1. Gaidar', L. M.; Zhilkin, V. Z. (1968). "Forward slip in the rolling of strip from metal powders". Soviet Powder Metallurgy and Metal Ceramics. 7 (4): 258. doi:10.1007/BF00775787.
  2. "Rhenium Diboride". American Elements. Retrieved 2018-08-02.
  3. La Placa, S. J.; Post, B. (1962). "The crystal structure of rhenium diboride". Acta Crystallographica. 15 (2): 97. doi:10.1107/S0365110X62000298.
  4. Chung, Hsiu-Ying; et al. (April 20, 2007). "Synthesis of Ultra-Incompressible Superhard Rhenium Diboride at Ambient Pressure". Science. 316 (5823): 436–9. Bibcode:2007Sci...316..436C. doi:10.1126/science.1139322. PMID 17446399.
  5. Qin, Jiaqian; He, Duanwei; Wang, Jianghua; Fang, Leiming; Lei, Li; Li, Yongjun; Hu, Juan; Kou, Zili; Bi, Yan (2008). "Is Rhenium Diboride a Superhard Material?". Advanced Materials. 20 (24): 4780. doi:10.1002/adma.200801471.
  6. W. Zhou; H. Wu & T. Yildirim (2007). "Electronic, dynamical, and thermal properties of ultra-incompressible superhard rhenium diboride: A combined first-principles and neutron scattering study". Phys. Rev. B. 76 (18): 184113–184119. arXiv:0708.3694. Bibcode:2007PhRvB..76r4113Z. doi:10.1103/PhysRevB.76.184113.
  7. Cumberland, Robert W.; et al. (April 27, 2005). "Osmium Diboride, An Ultra-Incompressible, Hard Material". Journal of the American Chemical Society. 127 (20): 7264–5. doi:10.1021/ja043806y. PMID 15898746.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.