Prussian S 9

The Prussian S 9 was an express steam locomotive with the Prussian state railways, first built in 1908. It had a 4-4-2 (Atlantic) wheel arrangement and a four-cylinder compound engine. It was developed by the firm of Hanomag in Hanover who delivered a total of 99 engines of this class.

Prussian S 8, S 9 DRG Class 14.0
Number(s)	DRG 14 001, 002, 031
Quantity	99 (2 were "S8"s)
Manufacturer	Hanomag
Year(s) of manufacture	1908ff.
Retired	1926
Axle arrangement	4-4-2
Axle arrangement	S 8: 2'B1' h4v S 9: 2'B1' n4v
Type	S 8: S 2/5 h4v S 9: S 2/5 n4v
Track gauge	1,435 mm (4 ft 8 ^1⁄2 in)
Length over buffers	21,860 mm
Length	13,110 mm (excl. tender)
Overall wheelbase	10,750 mm
Empty weight	68.0 t
Service weight	74.7 t
Adhesive weight	33.0 t
Axle load	16.5 t
Top speed	110 km/h
Coupled wheel diameter	1,980 mm
Leading wheel diameter	1,000 mm
Trailing wheel diameter	1,250 mm
No. of cylinders	4
LP cylinder bore	580 mm
HP cylinder bore	380 mm
Piston stroke	600 mm
Boiler Overpressure	14 bar
No. of heating tubes	272
Heating tube length	5,200 mm
Grate area	4.00 m^2
Radiative heating area	14.10 m^2
Tube heating area	222.00 m^2
Evaporative heating area	S 8: 229.71 m^2 S 9: 182.54 m^2
Tender	pr 2'2' T 21.5/30/31.5
Water capacity	21.5/30.0/31.5 m^3

There were also some high-speed trials locomotives which were classified as S 9s, but did not belong to this particular class. These included two cab-forward 4-4-4 locomotives Altona 561 and 562.

Although at the time superheated technology was widespread, the state of Prussia still wanted to have saturated steam engines delivered by Hanomag. The locomotives procured as a result had a very powerful boiler and, at 4 m², the largest grate area of any Prussian steam locomotive. The quantity of steam generated was however more than the high-pressure cylinders could cope with. As a result, the performance of the S 9 was little better than the considerably smaller superheated locomotive, the Prussian S 6. Nevertheless, the S 9 initially formed the backbone of express train services from Berlin to Hanover. Like all German Atlantic locomotives, the S 9 quickly proved too underpowered for the increasingly heavy trains it had to haul.

Two locomotives (Hannover 903 and 905) were fitted with superheated boilers in 1913 and 1914 and reclassified as S 8s.

After 1919 17 locomotives had to handed over to Belgium and 4 to France. Only three of them, the two S 8s and a saturated steam engine, were taken over by the Deutsche Reichsbahn as DRG Class 14.0. The two S 8s were given numbers 14 001 and 14 002; the S 9 ("Essen 907") number 14 031. All three were retired by 1926.

The locomotives were equipped with Prussian tenders of classes pr 2'2' T 21.5, pr 2'2' T 30 und pr 2'2' T 31.5.

Belgian engines managed to outlive German engines by several years since they were only written-off in 1948. They were used on fast trains on the lines around Antwerp.[1]

See also

• Prussian state railways
• List of Prussian locomotives and railcars

References

1. "Forums LR PRESSE • Voir le sujet - Atlantic 221 – les stars de la Belle Époque". forum.e-train.fr (in French). Retrieved 2017-11-04.