Pennsylvania Railroad class O1
The Pennsylvania Railroad's class O1 comprised eight experimental boxcab electric locomotives[4] built in 1930 and 1931.[1] They were built in preparation for the New York to Washington Electrification project.[5] They had the wheel arrangement classified as 4-4-4 in the Whyte notation (UIC: 2'B2'; AAR: 2-B-2). Although successful, they were not powerful enough for the railroad's increasingly heavy trains. For production, the PRR chose to concentrate on the P5 class, effectively an enlarged and more powerful version of the O1 with an additional pair of driving wheels.
PRR O1 | |||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PRR official photo of #7850 | |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||
|
The eight locomotives were divided into four sub-classes — O1, O1a, O1b, and O1c.[6] Each sub-class was fitted with a different combination of traction motor power output and drive gear ratio. In addition, three O1 locomotives were fitted with General Electric equipment, three with Westinghouse, and two with Brown Boveri. The O1b locomotives used a Buchli drive between the traction motors and the driving wheels. Double traction motors were used, with two motors geared to each axle.
Class | Numbers | Motors | Power | Gear Ratio | Maximum Tractive Effort | Continuous Tractive Effort |
---|---|---|---|---|---|---|
O1 | 7850–1 | 4× 500 hp (370 kW) | 2,000 hp (1,500 kW) | 31:91 | 28,500 lbf (127 kN) | 13,200 lbf (59 kN) @ 56 mph (90 km/h) |
O1a | 7852–3 | 4× 625 hp (466 kW) | 2,500 hp (1,900 kW) | 36:103 | 37,500 lbf (167 kN) | 14,900 lbf (66 kN) @ 63 mph (101 km/h) |
O1b | 7854–5 | 4× 550 hp (410 kW) | 2,200 hp (1,600 kW) | 49:114 | 35,000 lbf (160 kN) | 17,800 lbf (79 kN) @ 46 mph (74 km/h) |
O1c | 7856–7 | 4× 625 hp (466 kW) | 2,500 hp (1,900 kW) | 31:91 | 37,500 lbf (167 kN) | 14,900 lbf (66 kN) @ 63 mph (101 km/h) |
They were generally employed in pairs by sub-class, generally on short-distance passenger trains between Newark, New Jersey and New York City's Pennsylvania Station. During World War II they were used on the "Susquehannock" between Harrisburg, Pennsylvania and New York City. Later in life, they were used for transfer work around Penn Station and Sunnyside Yard, mostly hauling empty passenger stock. They were all out of service and scrapped by the mid 1960s.
References
- Barris, Wes (2007). "The O-1". www.steamlocomotive.com. Retrieved 2008-05-01.
- Pennsylvania Railroad (1932-08-18). "PRR Equipment Diagrams: Tracing #E-93844: O1a". PRR.Railfan.net. Retrieved 2008-05-02.
- Pennsylvania Railroad (1933-09-27). "PRR Equipment Diagrams: O1, O1b, O1c". PRR.Railfan.net. Retrieved 2008-05-02.
- Staufer, Alvin F.; Pennypacker, Bert (1962). Pennsy Power: Steam and Electric Locomotives of the Pennsylvania Railroad, 1900-1957. Research by Martin Flattley. Carollton, Ohio: Alvin F. Staufer. ISBN 978-0-9445-1304-0.
- Soloman, Brian (2003). Electric Locomotives. Saint Paul, MN: MBI Publishing. p. 47. ISBN 978-0-7603-1359-6.CS1 maint: ref=harv (link)
- Schafer, Mike; Solomon, Brian (1997). Pennsylvania Railroad. Osceola, WI: MotorBooks International. p. 10. ISBN 978-0-7603-0379-5. OCLC 36676055.