NZR RM class (Clayton)
The NZR RM class Clayton steam rail motor was a unique railcar that was operated by New Zealand Railways (NZR) for New Zealand's national rail network and one of only two steam railcars to operate in New Zealand - the other being 1925's RM class Sentinel-Cammell.
| NZ RM class Clayton | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Clayton steam railcar on a trial run at Kurow circa 1927. A P Godber Collection, Alexander Turnbull Library. | |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
| |||||||||||||
Background
In the 1920s, NZR began experimenting with railcars as a way of replacing mixed trains that carried both passengers and goods and ran too slow schedules as they had to load and unload freight regularly.[1]
Construction
Built in 1926 by Clayton Carriage and Wagon of Lincoln, England and assembled at NZR's Petone Workshops, the railcar could seat up to 52 people and its steam boiler could generate a pressure of 275 psi. It could be driven from either end and was capable of hauling a wagon or two of freight, and its airy, open design proved popular with passengers. It was not popular with crews or mechanics. Before it even commenced revenue operations, a heavier firebox and larger boiler had to be installed, and its poor reliability necessitated regular repairs. Due to these issues, no additional examples of the railcar were built.
In service
After its assembly and improvements were completed, the railcar was transferred to the South Island and took over passenger duties on the Kurow Branch, running from Kurow to Oamaru and return six days a week. Previously, the line's passenger services had been worked by mixed trains that carried both passengers and goods and thus would regularly stop for extended periods to load and unload freight, and the steam railcar proved to be a vast improvement, completing the journey an hour quicker, in 1 hour 45 minutes. It could maintain a speed of 30 mph (48 km/h) on straight, flat track, but when presented with steep grades or sharp curves, its speed would drop to 6–14 mph (9.7–22.5 km/h). One quirk of its operations was that farmers' dogs had to be carried in dog boxes for the duration of the trip rather than lying at their master's feet; as the railcar operated on a rural branch line, this policy was not greeted with enthusiasm.
Withdrawal
On 10 November 1928, a regular locomotive-hauled passenger train replaced the railcar, but this was not the end of its life. It was assigned to run various services in Otago and Southland for a number of years. In 1929 it worked suburban services between Invercargill and Bluff on the Bluff Branch. From 1930 it was only used intermittently,[2] and after eleven years of operation, it was withdrawn in 1937 and dismantled in the Invercargill yard.[3]
Railcar technology was improving by the 1930s. The Vulcan railcars (which had a lavatory) were ordered not long after the Clayton retired, and there was little need or economic justification for an older, somewhat unreliable steam-powered railcar that was not suitable for the rugged terrain that typified many lines in New Zealand. It did not survive to be preserved. Its sandbox was appropriated for use as a back sand gear on AB 810.[4]
References
- Bromby 2003, p. 122.
- Bromby 2003, p. 130.
- Bromby 2003, p. 123.
- McNamara, Joe; Whiting, Gordon (April–June 1958). "Southland Locomotive Memories". The New Zealand Railway Observer: 62.
Bibligography
- Bromby, Robin (2003). Rails that built a Nation: An Encyclopaedia of New Zealand Railways. Wellington: Grantham House. ISBN 1-86934-080-9.
- Churchman, Geoffrey B; Hurst, Tony (2001) [1990, 1991]. The Railways of New Zealand: A Journey through History (Second ed.). Transpress New Zealand. ISBN 0-908876-20-3.
- Leitch, David; Scott, Brian (1995). Exploring New Zealand's Ghost Railways (1998 ed.). Wellington: Grantham House. ISBN 1-86934-048-5.
External links
Alexander Turnbull Library photos -