M48 Patton

The M48 Patton is an American first generation main battle tank (MBT) introduced in February 1952, being designated as the 90mm Gun Tank: M48. Mrs. Beatrice Ayer Patton, wife of the late General George S Patton christened it as a Patton. It was designed as a replacement for the M26 Pershing, M4 Sherman variants and M46 Pattons used in the Korean War, and as the successor to the M47 Patton.[6]^:5 Nearly 12,000 M48s were built, mainly by Chrysler and American Locomotive Company, from 1952 to 1961. The M48 underwent many design modifications and improvements during its production life. This led to a wide variety of suspension systems, cupola styles, power packs, fenders and other details among individual tanks. The early designs, up to the M48A2C, were powered by a gasoline engine. The M48A3 and A5 versions used a diesel engine, however gasoline engine versions were still in use in the US Army National Guard through 1968 and through 1975 by many West German Army units. Numerous examples of the M48 saw combat use in various Arab–Israeli conflicts and the Vietnam War. Beginning in 1959, most American M48A1s and A2s were upgraded to the M48A3 model.

M48 Patton
M48A2C at the Deutsches Panzermuseum Munster.
Type	Main battle tank[1]^:35
Place of origin	United States
Service history
In service	1952–present United States Army (historical) 1952-1987 United States Marine Corps (historical) 1954-1973
Used by	See Operators
Wars	Cold War 1958 Lebanon crisis Portuguese Colonial War Dominican Civil War Vietnam War Six-Day War Indo-Pakistani War of 1965 Indo-Pakistani War of 1971 Yom Kippur War Western Sahara War Lebanese Civil War Turkish invasion of Cyprus Iran–Iraq War Battle of Mogadishu (1993) Kurdish–Turkish conflict 2007 Lebanon conflict
Production history
Designer	Chrysler Defense Engineering
Designed	1950[2]
Manufacturer	Chrysler Newark Tank Plant, DE Fisher Body Grand Blanc Tank Plant, MI Ford Motor Company Livonia Tank Plant, MI American Locomotive Company Schenectady Tank Plant NY
Unit cost	M48A3 1961 US$309,090 (equivalent to $2,644,475 in 2019)[3]
Produced	M48/M48A1 1952-1956 M48A2 1955-1957 M48A3 1957-1961[4]^:25–27
No. built	12,000 (all variants)
Variants	See Variants
Specifications
Mass	M48 49.6 short tons (44.3 long tons; 45.0 t)
Length	9.3 m (30 ft 6 in)
Width	3.65 m (12 ft 0 in)
Height	3.1 m (10 ft 2 in)
Crew	Four [2] Commander Gunner Loader Driver
Armor	Upper Glacis 110 mm (4.3 in) at 60° 220 mm (8.7 in) LoS Turret Front 178 mm (7.0 in) at 0°[1]^:428
Main armament	M48–M48A3 90mm M41/T139 gun M48A5 105 mm M68/T254E2 gun
Secondary armament	M48:.50 cal (12.7 mm) on M1 mount M48A1/A2/A3/A5:.50 cal (12.7 mm) in M1 Commander's Cupola M48/A1/A2/A3:M37/T153 Machine gun M48A5: M219 (.50 cal)
Engine	M48/M48A1 Continental AV1790 Carbureted, V12, air-cooled, gasoline engine AV-1790-5B AV-1790-5C AV-1790-7 AV-1790-7B AV-1790-7C 650 hp (480 kW) M48A2 Continental AVI-1790-8 Fuel injected, V12, gasoline engine 690 hp (510 kW)[lower-alpha 1] M48A3–M48A5 Continental AVDS-1790-2A V12, air-cooled, Twin-turbo, diesel engine 750 hp (560 kW)
Power/weight	16.6 hp (12.4 kW)/tonne
Transmission	Allison CD-850-4A or CD-850-4B Two forward ranges One reverse
Suspension	Torsion bar suspension
Ground clearance	16 in (0.41 m)
Fuel capacity	M48:200 US gal (760 l) M48A1:200 US gal internal 420 US gal (1,600 l)(with external fuel drums) M48A2:335 US gal (1,270 l) M48A3/M48A5:300 US gal (1,100 l)
Operational range	M48 113 km (70 mi)[5] M48A1 217 km (135 mi) with external fuel drums[5] M48A2 177.8 km (110.5 mi) M48A3 463 km (288 mi)[5] M48A5 499 km (310 mi)[5]
Maximum speed	M48A5 30 mph (48 km/h)

The M48 Patton-series saw widespread service with the United States and NATO until it was superseded by the M60 tank as well as being widely exported. The tank's hull also developed a wide variety of prototypical, utility and support vehicles such as armored recovery vehicles and bridge layers. Some M48A5 models served into the mid-1980s with US Army National Guard units and M48A3s were used as targets for weapons and radar testing into the mid-1990s. Many M48s remain in service in other countries though most of these have been highly modified and had their firepower, mobility and protection upgraded to increase their combat effectiveness on the modern battlefield. As of 2015 Turkey is the largest operator with over 750 units in service, Taiwan is second with approximately 500 upgraded variants and Greece is third with 390 in service.

History

After the conclusion of World War II, the United States Ordnance Tank-Automotive Command (OTAC) drastically slowed or canceled many tank development and design programs. On 7 November 1950, the Ordnance Technical Committee mandated a change in the nomenclature for tanks in the US Military.[6]^:2 It was decided that weight designations (Light, Medium, Heavy) were no longer applicable due to changes in the way tanks were developed and employed on the battlefield, and the varying calibers of main guns now available. Thus the caliber of the gun replaced its weight designation. For example, the M103 Heavy Tank was redesignated as the 120mm Gun Tank M103 and the Light Tank M41 Walker Bulldog as the 76mm Gun Tank M41 Walker Bulldog.[7] The M47 Patton entered production in 1951 and was used by the United States Army and Marine Corps but ongoing technical and production problems kept it from serving in the Korean War. This forced the US to field older tank models, such as the M26 Pershing and M46 Patton. In response, the Army launched several design projects for a replacement of the M46 and M26. The United States entered a period of frenzied activity during the crisis atmosphere of the Korean War, when America seemed to lag behind the Soviet Union in terms of tank quality and quantity.[8]^:22–23 Testing and development cycles occurred simultaneously with production to ensure speedy delivery of new tanks. Such rapid production caused problems but the importance given to rapidly equipping combat units with new tanks precluded detailed testing and evaluation prior to its quantity production.[9]^:31 Notable among these were the T42, T69 and T48 projects as well as continuing to pursue further improvements to the M47. General Bruce C. Clarke stated "We know exactly what we want. We want a fast, highly mobile, fully armored, lightweight vehicle. It must be able to swim, cross any terrain, and climb 30 degree hills. It must be air-transportable. It must have a simple but powerful engine, requiring little or no maintenance. The operating range should be several hundred miles. We would also like it to be invisible".[10]^:11

T48 Project

The T48 was to focus on improving the turret design of the M47 Patton and using a more powerful gasoline engine with better fuel economy. 1/4 and 1/8 scale design mockups of the turret were constructed during May 1950 using the T119 90mm main gun of the M47 Patton. The design study was accepted by the Army in December and a contract for the advanced production design and engineering (APE) of a 90mm armed tank, the T48, was awarded to the Chrysler Defense. Six prototypes were built, the first by December 1951.[11]^:11 The hull was redesigned, moving the driver's station to the front center and the bow-mounted machine gun and its associated crew station were removed and converted to safe container storage for additional main gun ammunition.[12] The front glacis was redesigned into a slope and offered much better ballistic protection than former welded and rather flat designs.[12] The driver steered the vehicle using an aircraft styled steering wheel. Initially the power pack consisted of the Continental AV-1790-5B gasoline engine producing 704 brake horsepower coupled to an Allison CD-850-4A cross-drive transmission with 2 forward and 1 reverse ranges. The hull armor was increased to 4 in (100 mm) on the front glacis of rolled homogeneous steel. It had six roadwheel pairs per side and five return rollers, a torsion bar suspension system, using the T97E2 steel track assembly. A new hemispherically shaped turret was implemented for the T48. This was to eliminate the noted shot traps in the M47's turret design and also lowered the vehicle's height in comparison to the M46 and M47. T48 pilot #1 was constructed by Chrysler Engineering to begin the design development at the OTAC Detroit Arsenal Test Center in December 1951.

On 27 February 1951, shortly after the outbreak of the Korean War, the Ordnance Technical Committee Minutes (OTCM) #33791 initiated the simultaneous production and design refinement of the new tank, designating the production tanks as the 90mm Gun Tank M48.[1]^:85,152 The Army planned to produce some 9,000 M48s within three years of development. Such rapid, mass production would close the imbalance between Soviet and American tank forces. Meeting this goal, however, required production simultaneous with operational testing and development. Chrysler Corporation became the principal producer of the tank. Expected production and teething troubles led to the creation of integrating committees to coordinate tank and component development. These Army Combat Vehicle (ARCOVE) committees included military and industrial representatives who provided early warning of defects and recommended remedies.[6]^:21–22 Testing trials of the T48 tanks began in February 1952 and continued until the end of 1955. However the perceived immediate threat of Soviet aggression in Western Europe and the ongoing Korean War impelled Army senior leadership to rush the T48 tank into series production before the inevitable bugs could be worked out of the new tank design. Instead, it was decided that any needed design changes uncovered by the continued testing and evaluation of the T48 tanks at the OTAC Detroit Arsenal Test Center would be incorporated into the M48 series production vehicles as quickly as possible.[6]^:21–27

T48 pilot #1 was designed and constructed by Chrysler Engineering to begin the APE design development at the OTAC Detroit Arsenal Test Center in December 1951. This tank was provisionally armed with the M36/T119 gun using a Y-shaped deflector and a muzzle brake.[13] This gun was not used for production M48 tanks. It used the Mod A hull and turret designs with smaller diametered crew hatches. The driver's hatch incorporated a mechanism that dropped his three periscope heads to provide clearance for the hatch door as it swung to the right, and the driver then had to reposition the periscopes by hand once the hatch was closed again. It had 5 return rollers, 6 roadwheel pairs per side with the drive sprocket at the rear and a torsion bar suspension system.[14]

Pilot #2 was built in February 1952 and also used the early Mod A design with small hatches. It was fitted with the T139/M41 90mm gun replacing the muzzle brake with a cylindrical blast deflector.[15] A T-shaped deflector was used for production M48 tanks. This vehicle had two coaxial machine guns installed, a .30cal M1919E4 and a .50cal M2HB.[14] The full image stereoscopic T46E1/M12 rangefinder was placed in the central section of the turret.[12]

Pilot #3 was constructed in November 1952 and used the Mod B hull and turret designs with a simplified, larger diametered hatch that was easier for the driver to operate. Also the front vision block was removable and allowed for the future use of IR vision blocks by the driver. It also had 5 return rollers, 6 roadwheel pairs per side with the drive sprocket at the rear and a torsion bar suspension system. The Mod B turret also had larger hatches for the commander and loader. An additional three hulls were constructed (T48 pilots 4 through 6) in 1953. These tanks were used into 1955 for the component development of the M48A2 production tanks including fire control systems, turret cupolas, suspension configurations and powerpacks.[16] At least one of these hulls was fitted with experimental silicas glass composite armor panels.[17]

Armor

In conjunction with the development of the T48 project there was some discussion regarding armor. The weight of conventional armored steel needed to provide protection against the emerging large-calibered high-velocity main guns and improved APDS kinetic energy penetrators was making its continued use impractical. Composite applique armor panels made with fused silica glass was envisioned to be fitted to the hull. It was also desired that a turret be constructed using this special armor.[17] The OTAC and Carnegie Institute of Technology began development of the armor in November 1952 at Fort Belvoir VA as Project TT2-782/51.[17] This composite armor provides protection against HEAT, HEP, and HE rounds. Its overall slow development limited its use to the T48 and was dropped from consideration in the M48 by 1953, however its development was continued with the T95 Medium Tank until 1958.

There were two different hulls used for the M48 series. The M48 hull had a wedge-shaped front glacis compared to the M46's rather flat design. Early Mod A hulls had smaller diametered driver's hatches. The suspension consisted of six roadwheel pairs per side with a torsion bar suspension system and five return rollers. The engine exhaust vents were located on the top of the rear deck. There was a dual compensating idler arm at the front, and dual auxiliary track tension wheels behind the last road wheels, using the T97E2 track assembly. The drive sprocket was located at the rear of the hull. Shock absorbers were mounted at the first two and last roadwheel arms. This hull design was manufactured for the original M48 and M48A1 versions of the M48 series.[18] Many Mod B hull designs used for the M48A1 (T48 Pilot #3) were further upgraded to the A2 hull design standard but retained their original 5 return roller configuration.

The M48A2 hull design saw several modifications including a reduction from five to three return rollers per side. The suspension system was simplified, a more compact powerpack compartment and additional fuel cells, with large louvered grill access doors replaced the complicated grill work of the rear engine decks of the M48/M48A1 hull designs. This hull was used on newly constructed M48A2 and M48A3 tanks of the M48 series.[18]

The turret used for the M48 series was hemispherical in shape and was made from cast homogeneous steel. It had a flat gun shield and a standard pop-up styled hatch for the commander and an additional hatch for the loader's station. Early production Mod A models of the turret had somewhat smaller diametered hatches. The gunner was provided with an M37 .30 cal machine gun with 5,900 rounds of ammunition.[18]

Rangefinders and Fire Control Systems

During WWII and the Korean War, most tanks used a direct sighting system where the gun sights and rangefinders were slaved directly to the gun's barrel but its long range accuracy depended upon the focusing abilities of the individual gunner. There are two basic types of optical rangefinders, stereoscopic and coincidence. With a stereoscopic model range determination occurred by measuring the distance from the observer to a target using the observer's capability of binocular vision. The coincidence rangefinder uses a single eyepiece. Light from the target enters the rangefinder through two windows located at either end of the instrument. The ARCOVE emphasis upon increased long range accuracy led to the incorporation of a fire control system (FCS)[19] in the M48. The fire control system included a rangefinder, mechanical ballistic computer, ballistic drive, and gunner's sight. Collectively, these mechanical devices resembled in miniature the fire control systems used in naval gunnery. Only after the Second World War did such systems become small enough for use in combat vehicles. These mechanical fire control systems permitted tanks to engage effectively at much longer ranges than in World War II, a critical consideration for the Army, expecting to enter the European battlefield outnumbered. Instead of a gunner's sight being slaved to the gun tube, the ballistic computer and drive computed the range and elevated the gun. The gunner's primary responsibility lay in keeping the sight on the target. The mechanical ballistic computer made a more accurate computation of range possible by mathematically accounting for such factors as vehicle cant and ammunition type.[6]^:1–2 Many developmental range finders based on pulses of IR light, such as the Optical Tracking, Acquisition and Ranging (OPTAR) rangefinder of the T95 continued into 1957.[20]^:174

Autoloader systems

Another requirement of the T48 project was to explore the use of autoloaders for the main gun as they became available. Preliminary experiments with a loading system using the T48 turret were unsuccessful due to the limited space and the need to line up the breach with the loading system after each firing. It also was dropped from consideration for use on the M48 but was further developed on the T69 tank as the 90 mm T178 gun. It was fitted with an eight-round auto-loader system mounted in an oscillating turret.[13]

90 mm Main Gun

ARCOVE also involved the Ordnance Department with the goal of improving the 90 mm gun and its ammunition. The Army expected difficulties in engagements with the Soviet IS-3 heavy tank, since the M47's M36/T119 90 mm rifled main gun could not consistently penetrate its frontal armor, even with special armor-piercing capped (APC) or HEAT ammunition.[21]^:12 Work was performed to address this by developing the improved T300E53 HEAT ammunition and the T137 series of Hypervelocity Armor-Piercing Discarding-Sabot (HVAP-DS or simply APDS) ammunition for the M36 gun. The new APDS round could penetrate 11.1 in (280 mm) of homogeneous steel armor, angled at 30 degrees, at a distance of 1,000 yd (910 m), but was not accepted for service.[21]^:12 Instead it was decided to use an improved version of the 90 mm gun, the T139 for the M48 production tanks. It allowed for easier barrel changing and weighed less than the preceding M36/T119 gun. It was later standardized as the 90mm Gun M41 in February 1951.

Turret Cupolas

The T48 and M48(Mod A) tanks featured a remote controllable machine gun mount as the tank commander's weapon on a pedestal, which allowed him to fire the .50 caliber (12.7mm) M2HB machine gun from within the vehicle's turret. It used a 100-round ammunition box and could also be employed manually by the commander. However, servicing and reloading of the weapon required the tank commander to open his roof hatch and expose his head and upper torso. This remote controllable mount was designated as the .50 Caliber Machine Gun Mount, M1 and designed by Chrysler Defense Engineering.

By October 1954, the Army decided to amend the design of the tank by installing a cupola. During the production of M48s it was modified several times resulting in a wide mix of cupola styles among individual tanks. Afterwards it was renamed as the Cupola, Tank Commander's Caliber .50 Machine Gun, M1.[11]^:23 The new tank commander cupola would allow the tank commander to aim and fire his weapon while remaining under armor protection via a remote controlled M2HB machine gun, however the commander had to open the cupola hatch and expose his head to reload or service the machine gun due to the limited headroom. These cupolas had a small rearward opening hatch and a single, non-removable vision block. They were designed by Aircraft Armaments Incorporated. Because of its smaller turret roof hatch opening those M1 cupolas retro-fitted to early production M48 Mod A turrets used an adaptor ring.

The M1E1 cupola design used a G305 cupola riser with 9 non-removable vision blocks installed (some versions had 7 with the 2 rear blocks deleted) between the turret roof and the cupola. It also came with a new bulged hatch cover to provide the tank commander with more headroom and allowed him to reload the weapon while remaining under armor protection. A major drawback of both these cupolas was their inability to mount either daylight or infrared vision devices. The receiver of the M2HB took up a great deal of space in the already cramped cupola's interior. Also due to restraints in the cupola, smaller 50 round ammunition boxes were used. Development of its eventual replacement, the T9/M19 cupola of the XM60 tank was continued into 1958 and some M19 cupolas were retro-fitted to M48A5s to allow for the use of IR and daylight periscopes by the commander.[1]^:109–111

M48

M48 Main Battle Tanks

Chrysler began building the new Newark Tank Plant in Newark, Delaware in March 1951 to produce the M48 while Chrysler Defense Engineering and ARCOVE continued advanced production engineering (APE) to evolve the design using the T48 prototypes at the OTAC Detroit Arsenal. In May 1952 Chrysler came to an agreement to take control on a Government Owned and Contractor Operated (GOCO) basis of the Newark Tank plant production facility with the US Government and to continue production design refinement of the T48 at the OTAC Detroit Arsenal. To meet the urgent need for tanks, production contracts were also awarded to General Motors Fisher Body Division (Grand Blanc Tank Plant) and Ford Motor Company (Livonia Tank Plant) to produce the tank in Michigan starting in April 1952. Also in July 1952 the Army awarded American Locomotive Company a $200 million contract to start producing the tank in 1953 at the Schenectady Tank Plant in New York.[22] All four companies were given initial production contracts in that same year for around 400 tanks each. The first Chrysler production tank was unveiled on 1 July 1952 as the 90mm Gun Tank M48 and christened the M48 Patton by Mrs. Beatrice Ayer Patton, widow of the late General George S Patton.[23]

The M48 featured a gasoline-powered engine, different models were used depending on availability and manufacturer. Originally the M48(Mod A) that was built by Chrysler Defense at the OTAC Test Center (T48 Pilot #1) in 1951 used the Continental AV-1790-5B coupled to a General Motors CD-850-4A cross-drive transmission as used for the M47.[1]^:317 The M48s built by American Locomotive used a Continental AV-1790-5C gasoline engine and either an Allison CD-850-4A or 4B cross-drive transmission. Additionally a two-cylinder, gasoline, air-cooled engine (sometimes referred to as the "Little Joe" by tank crews) was provided to power a 28 volt, 300 ampere generator when the main engine was not needed. Fuel capacity was 200 US gal (760 l) providing a cruising range of about 70 mi (110 km). The suspension consisted of six roadwheel pairs with a torsion bar suspension system and five return rollers. There was a dual compensating idler arm at the front, and dual auxiliary track tension wheels behind the last road wheels, using the T97E2 track assembly as were the previous M46 and M47 tanks.[12] It had hydraulic shock absorbers mounted on the first, second and sixth roadwheel pairs (opposite of the M46 and M47). The bow mounted machine gun and its related crew station was eliminated thus providing more ammunition storage for the main gun. The driver's station was moved to the front center of the hull. The steering controls were redesigned. A large aircraft-styled steering wheel (replacing the wobble stick control of the M46 and M47) and placing the transmission range selector on the floor to the driver's right. Mod A hulls had a small oval overhead hatch for the driver. T48 Pilots #1 & 2 incorporated a mechanism that dropped the three periscope heads to provide clearance for the hatch door as it swung to the right, and the driver then had to reposition the periscopes by hand once the hatch was closed again. The vehicle did not have an NBC protection system for the crew and a fording depth of approximately 1.2 m (3.9 ft). It had a crew of 4; the commander, gunner and loader were positioned in the turret and the driver stationed in the front center of the hull.

The M48's turret consisted of a redesigned flat gun shield and standard pop-up hatch for the commander's station. The M48 Mod A turret design had smaller roof hatches for both the commander and loader. A .50 cal M2HB using a M1 remote control mount on a pedestal was available for the commander. When not in use, the machine gun mount could be stowed on a bracket welded to the turret roof in front of the loader. The M48's direct fire control system consisted of an M12/T41 stereoscopic rangefinder with a field of view of 5 degrees and magnification of x7.5, an azimuth indicator, an M20 gunner's periscope and a T13 super elevation actuator. Two main bearings are bolted to the mounting plate on the roof of the tank turret to support the range finder on steel radial ball bearings. A parallel gun linkage between the gun trunnion and the range finder assures that the line of sight of the range finder reproduces the exact motion of the gun in elevation.[24]^:60 A .30 caliber M1919E4 machine gun was coaxially mounted to the main gun's right and was operated by the gunner. An M12 full field optical range finder was used, the same as the M47. The tank was not fitted with any night fighting or computerized fire control systems.[25] Some early production M48s used a Y-shaped blast deflector on the barrel and carried 53 rounds. Eight ready rounds were stored in the left side of the turret bustle for the loader, the rest were stored inside safe containers in the hull. Tank crews complained that the Y-shaped fume extractor was found to be prone to snagging brush. It was replaced with a T-shaped model early in production.[12]

These early M48 tanks suffered from engine, transmission, track, and suspension problems. The first production vehicles suffered from excessive oil consumption and engine failures after only 1,000 mi (1,600 km). The gasoline engine managed only 0.33 mpg US (0.14 km/L), limiting range to 75 miles (121 km). The M12/T41 rangefinder was too fragile and often broke. Army Field Forces (AFF) found these tanks to be unsuitable for combat use in Europe and was regulated to limited use by US Army CONUS units until numerous shortcomings were corrected. Furthermore, some 120 hulls were found to have insufficient hull armor protection. These were denoted as the M48C and relegated by the Continental Army Command (CONARC) for non-ballistic training use by the Armor School at Fort Knox to train crewmembers and maintenance personnel.[8]^:25

M48A1

Two M48A1s face off against T-54s during one of several standoffs at Checkpoint Charlie in 1961

The Army concluded in January 1952 that the T42[26] had failed as a tank capable of combat in Europe against Soviet tanks and reached the same conclusion in November 1953 for the M48 Mod A versions.[9]^:32 The M48A1 focused on improving the engine and the vehicle's operational range and fixing numerous mechanical problems. To cope with the lack of range, an add-on modification allowed the use of 4 external jettisonable 55 US gal (210 l) fuel drums of MOGAS (motor gasoline) that was mounted to the rear deck, extending the range to 135 mi (217 km). This proved very unpopular with tank crews and operational range remained unsatisfactory.[27] Further ARCOVE changes included a desire for the commander to observe and operate his weapons station while remaining under armor protection.[27] At this same time the US Army Field Forces (AFF) declared the T42 medium tank unfit for production in November 1952, mainly due to serious shortcomings of its hull design. Ford's production of the M48 ended in August 1953 after a fire destroyed most of the Livonia Tank Plant.[28]

Testing and feedback from ARCOVE had uncovered the fact that the original driver's hatch design of the M48 Mod A hull's design (T48 pilots #1 and 2) tanks proved to be too small and made for an uncomfortable seating position for the driver when operating the tank with his hatch in the open position. To rectify this problem a new larger driver hatch was devised that was introduced into series production vehicles as early as possible. Also the driver's front vision block was removable and could be replaced with an infrared IR vision block. A redesigned power pack featured an AV-1790-7B gasoline engine and CD-850-4B transmission.[18] The turret was fitted with the M1 cupola that enclosed the M2HB machine gun. Cupolas fitted on those tanks with early production Mod A turrets used an adapter ring.[12] In April 1953, the Army standardized this configuration as the 90mm Gun Tank M48A1 Patton[1] and originally applied this designation to both the early Mod A hull design and the Mod B hulls currently in series production.

Between April 1952 and December 1954, nearly 7,000 M48s and M48A1s were produced, with production contracts for an additional 2,500 tanks to be built through 1956.[29] Army units in Europe immediately received 2,120 of these early M48A1 tanks, but correction of ARCOVE defects discovered after production delayed the fielding of the remaining tanks. The Marines Corps however continued to use the M47 Patton. The M48A1's width proved too wide for many European tunnels, complicating rail transport.[29] Operational readiness rates of M48-equipped units tended to be low. The tanks continued experiencing engine, transmission, track, and suspension problems, and the M12 stereoscopic rangefinder was uncomfortable to operate.[29] However, the M48A1 was considered an even match for its Soviet counterpart, the T-54 and fielded to combat units in Europe. On 25 October 1954, the Army decided to amend its designation of the M48 tank. Thereafter, the tanks with the original Mod A hull design and the Chrysler-designed M1 remote-control machine gun mount attached to the tank commander's pop-up hatch would remain the 90mm gun tank M48. However, all those tanks with the Mod B hull (some production M48A1 tanks had the Mod B turret) and fitted with the new small turreted M1 cupola armed with a .50 caliber M2HB machine gun would be designated as the 90mm gun tank M48A1.[29] M48A1 tanks with 5 return rollers and the ModB driver's hatch were modified to the M48A2 hull configuration. The hull's armor framing for the engine compartment was modified. In addition detachable headlights, armored boxes around the taillights, newly redesigned mudguards, an updated fuel delivery system and a tank infantry phone were added.

M48A2

The concurrent testing of the T48 and production of the M48 was the source of widespread debate among Congressional Budget Oversight committees. The Bureau of the Budget believed that the Army was not progressing with sufficient speed in its tank modernization program and recommended the immediate replacement of the M48A2 as well as better quality control. Under the ARCOVE's "single, efficient producer" model, Defense Secretary Charles Erwin Wilson directed the Army to reduce the number of contractors producing each model of tank. In a new round of production bids for the M48A2, General Motors underbid Chrysler, and in September 1953 Army Secretary Robert T. Stevens awarded GM's Fisher Body division a $200 million contract to become the sole producer of the M48A2 and started production at its Grand Blanc Tank Plant in Michigan in April 1953.[30] The decision raised skepticism among lawmakers. Senator Estes Kefauver noted the move would effectively leave GM as the only producer of light (the M41 Walker Bulldog) and medium tanks when the Chrysler production contract for M48A1 production was set to expire in April 1956. Months later Chrysler underbid GM in the new round of bidding. In September 1954 the Army awarded Chrysler an exclusive $160.6 million contract to restart production.[31] In November 1955 the Army awarded American Locomotive Company a $73 million contract to begin producing 600 M48A2s the next year at the Schenectady Tank Plant, New York.[32] However Alco opted to wrap up its tank business when its contract ended in July 1956. In May the Army awarded Chrysler, the only bidder, a $119 million contract to continue production of the M48A2 at the Delaware Tank Plant.[33] In December 1955 Chrysler took on orders initially intended for the American Locomotive after Alco opted production cutbacks to its tank program[34] and became the only manufacturer of the tank by the end of 1956.

R-32 tank design proposal

During the ARCOVE Questionmark III conference in June 1957 it was predicted that the Congress would not approve the procurement of the M48A2 after the fiscal year 1959. However the ongoing T95 Tank Program was progressing slowly as its new technologies were being developed. Several ideas were proposed to replace the M48A2. General Bruce C. Clarke stated "We know exactly what we want. We want a fast, highly mobile, fully armored, lightweight vehicle. It must be able to swim, cross any terrain, and climb 30-degree hills. It must be air-transportable. It must have a simple but powerful engine, requiring little or no maintenance. The operating range should be several hundred miles. We would also like it to be invisible".[35] Some ideas proposed were to utilize a nuclear fission power plant in the R-32 or a vapor-cycled power plant fueled by hydrocarbons in the Chrysler TV-8 tank.[36] In response to these findings an eventual replacement for the M48A2 was recommended. ARCOVE and the Deputy Chief of Staff, Logistics (DCSLOG) proposed a tank based on the M48A2 featuring improved firepower and a compression ignition engine and started the design development of the XM60 in September 1957.

The engine deck was redesigned with two large louvered doors that replaced the complicated grill work of the rear engine decks of the M48/M48A1 hull designs. This new rear hull arrangement on the M48A2 tank helped in cooling the engine and minimizing the infrared (heat) signature of the vehicle.[4]^:73 The suspension system was simplified. The track tensioner arm was eliminated, modifications to the idler arm, the addition of bumper springs and friction snubbers, and a relocation of the air cleaner assembly. The number of return rollers was reduced to 3 per side. With the more compact AVI-1790-8 engine, additional fuel tanks were installed in the engine compartment, increasing fuel capacity to 335 gallons.[1] Many older model M48A1s were rebuilt to this production configurations but retained their original 5 return rollers per side.[37]^:144

The M48A2C saw improvements for the turret implementing the Mod B turret design with larger hatches for the commander and loader. The M12 rangefinder was replaced with a full-field coincidence model along with an improved turret control system. The M13 Fire Control System (FCS) consists of the M5A2 ballistic drive and mechanical M13A3 gun data computer which integrated barrel temperature data[38] with an M17 coincidence range finder.[18] The rangefinder is a double image coincidence image instrument used as the ranging device of the gunner's primary direct sighting and fire control system. The gunner is provided with an M20 day periscope with a magnification of x8 and an M105D day telescopic sight with a magnification of x8 and a field of view of 7.5 degrees.[38] Range information from the rangefinder is fed into the ballistic computer through a shaft. The ballistic computer is a mechanically driven unit that permits ammunition selection, range correction, and superelevation correction by the gunner. The ballistic drive receives the range input and, through the use of cams and gears, provides superelevation information to the superelevation actuator. The superelevation actuator adds sufficient hydraulic fluid to the elevating mechanism to correctly position the gun.[8]^:25

M48A2s were widely deployed to both the US Army and US Marine Corps fully replacing the M47 Patton in combat units as well as being exported to NATO allies and foreign governments. In 1967 M48A2 tanks still in service with National Guard units were upgraded to the A3 configuration. The M48A2 hull received modified armored boxing around the taillights, an updated fuel delivery system and a tank infantry phone (TIP). The gasoline engine was replaced with the AVDS-1790-2A.They remained in CONUS training use with the Army National Guard through 1979.

M48A3

The continued use of gasoline engines was undesirable due mainly to its high fuel consumption, poor low-end torque and fuel flammability. ARCOVE industrial representatives had expressed desires for a diesel engine for the tank since 1953.[12] Continental Motors and OTAC began to develop an experimental X-shaped vapour-cycled engine design powered by hydrocarbons in 1954 for the T95 tank but it remained unreliable. In June 1955, OTAC adopted the recommendations and allowed a diesel engine to be used if it significantly contributed to better fuel economy.[11]^:31 By August 1956 the diesel powered AVDS-1790 was recommended for the M48 and the Army requested the initial retrofitting of approximately 1,020 older M48A1s and A2s with the new engine in December.[18] By February 1957, the US Army had around 600 converted M48A3 Patton tanks and the US Marine Corps had received 419.[39] The A3 model incorporated a diesel engine which greatly improved its cruising range.[1] Because many M48A3 tanks were conversions from earlier models many details varied among individual examples of this type. M48A3 tanks could have either three or five support rollers on each side and might have either the early or later type headlight assemblies, some retained their earlier Mod A turrets and different cupola styles. [1]

During the Hungarian Revolution of 1956, a Soviet T-54A medium tank was driven onto the grounds of the UK's embassy in Budapest by the Hungarians.[40] After a brief examination of this tank's armor and 100 mm gun by a British military attaché, the UK decided that their 20 pounder (84mm L/66.7) was apparently incapable of defeating it. There were also rumors of an even larger 115 mm gun in the works.[41]^:137 In response to this the US Army started development of the XM60 to replace the M48 tank series and incorporating the ARCOVE recommendation of a more powerful main gun, the 105mm T254. Instead of immediately getting a 105mm main gun, the M48A3 tanks were to retain their existing M41 90mm main guns due to funding shortfalls that made it impossible to supply enough 105mm main gun rounds for all the planned converted tanks. Secondly, there were still large stockpiles of 90 mm main gun rounds on hand.

In addition to the conversion of older model M48s, Chrysler continued to build new vehicles. New vehicles built to this standard used the M48A2 hull design (with 3 return rollers) and had redesigned fenders and mudguards, armored boxes around the taillights among other minor details. They were fitted with another re-designed commander's cupola, the M1E1. It had a modified hatch to allow more room in comparison to the previous M1 cupola and the two rear vision blocks were eliminated.[1]^:87 The driver's steering wheel was replaced with a T-bar control and received a padded seat.[18] M48 procurement for the Army ceased and M48A2 hull production ended in May 1961. The Newark Tank plant was closed in October.[1]^:103 This newest version of the M48 series received the designation Tank, Combat, Full-Tracked; 90mm Gun, M48A3 on 19 March 1958.[6]^:29

Marines of E Company, 2nd Battalion, 3rd Marines, riding on an M48A3 tank, Vietnam, 1966

The M48A3 was withdrawn from Europe by October 1961, being replaced with the M60 tank. As US armored and cavalry units rotated out of combat deployments to South Vietnam most of their M48A3 tanks were either directly transferred to the South Vietnamese Army or to Thailand. FORSCOM withdrew the M48A3 from combat service with both the US Army and US Marine Corps in 1973 replacing them with the M60A1 tank. Some M48A3s continued in service with National Guard units until 1979. Some were repurposed as AVLBs. Afterwards they were relegated to target use for the testing of radar and weapons systems until the mid 1990s.[42] They were replaced in this role by the QM60.

M48A5

M48A5 Patton on display at Lawrenceville National Guard Museum

The last major US upgrade of the M48 tank series was the M48A5. This conversion upgrade was applied to M48A3 versions still in service with Army National Guard units in order to maintain the training levels of Guard units as well as using a commonality in ammunition amongst tanks. The upgrade featured the mounting of the M68 105mm gun carried in the M116 mount and the all-metric measurement M16 fire control system. The hull was upgraded by applying the M60A1 RISE Hull PIP Update Kit and incorporated as many of the components as possible. Some of these included the retrofit of the AVDS-1790-2C RISE diesel engine incorporating TLAC engine panels coupled to with a CD-850-6 cross-drive transmission, a 300-gallon fuel capacity and the T142 track assembly, M13A1 NBC protection system for the crew and the replacement of the .30 caliber M37 coaxial machine gun with the 7.62mm NATO M219/T175 machine gun.[43] Because all M48A5 tanks were conversions from earlier models, many characteristics varied among individual examples of this type. M48A5 tanks could have either three or five support rollers on each side and might have either the early or later type headlight assemblies, some retained their earlier cupola styles.

Starting in 1975 M48A3 tanks that were still in service with the Army National Guard were converted to the M48A5 standard. These tanks were initially converted from former M48A3 tanks using the M48A1 hull design (with 5 return rollers) and given the designation M48A5PI. But, after August 1976 these early hull conversions were further upgraded, the PI designation was removed, and these tanks were redesignated as the M48A5. By March 1978, 708 M48A5 tanks had been converted from the M48A1 hull model.[1] In conjunction with the conversion of M48A1 tank hulls, the conversion of M48A3s mated to M48A2 hulls (with 3 return rollers) to the M48A5 standard was also implemented in 1976. The conversion program ran from October 1975 to December 1979 with a total of 2,069 M48A3s converted to the A5 standard.[1]

An M48A5 of B co 1-27th Armor Regiment, New York Army National Guard performing as the OPFOR force during joint exercise Sentry Castle 1981 with the NY Air National Guard.

They were used by Guard units in CONUS to maintain their training levels and proficiency. In May 1987, at Fort McCoy, 1st Battalion, 632nd Armor Regiment of the Wisconsin Army National Guard retired the last M48 tanks in the US military. The tanks were parked in a holding pen at the WI ARNG Mobilization and Training Equipment Site (MATES) and later transferred to the Moroccan Army. They were replaced in National Guard service by the M60A3.[44] However many other countries continue to use these M48 models.

Israel's wartime experiences with their M48/E48C Magach tanks spurred the IDF to implement its own changes. These included replacing the M1 cupola with a low-profile "Urdan" type cupola that mounted an M60D machine gun for use by the tank commander. A second M60 machine machine gun was mounted on the turret roof for use by the loader. Internal ammunition stowage for the 105mm main gun was also increased to 54 rounds. Many of them were fitted with Blazer ERA panels.

E48 series

M48s for use in foreign military service were designated as the E48 series by the US Foreign Military Sales (FMS). These were essentially M48s with minor modifications requested by approved foreign purchasers. Some of the modifications included removal of the M1 cupola, different models of machine guns, electronics, fire control systems or radios, external armor plates, smoke launchers and power packs.[45] Israel purchased many of these tanks forming the basis for the Magach series.

This series included the following designations:

• E48: modified M48/M48A1 variant for non-US service
• E48A: modified M48A2 variant for non-US service
• E48B: modified M48A3 variant for non-US service
• E48C: modified M48A5 variant for non-US service
• E48 AVLB: modified M48 AVLB variant for non-US service

Combat service

Vietnam

US Marines riding atop an M48 tank in Vietnam in April 1968.

The M48 saw extensive action with the US military during the Vietnam War. Over 600 Pattons would be deployed with US forces during that war.[1][46] The initial M48s first landed with the US Marine 1st and 3rd Tank Battalions in 1965,[47] with the 5th Marine Tank Battalion later becoming a back-up/reinforcement unit. The remaining Pattons deployed to South Vietnam were in three US Army battalions, namely the 1-77th Armor near the DMZ (67 M48A2C (23 tanks supplied from US Army Training Center at Fort Knox, and 44 tanks from Letterkenny Army Depot) tanks were used by the 77th Armor from August 1968 to January 1969. These were later replaced with M48A3s), the 1-69th Armor in the Central Highlands of central South Vietnam and the 2-34th Armor positioned near the Mekong Delta. Each battalion consisted of approximately 57 tanks. M48s were also used by Armored Cavalry Squadrons in Vietnam until replaced by M551 Sheridan Armored Reconnaissance Airborne Assault Vehicles (ARAAV) in the Divisional Cavalry Squadrons. M48A3 tanks remained in service with the 11th Armored Cavalry Regiment until the unit was withdrawn from the conflict. The M67A1 flame tank (nicknamed the Zippo) was an M48 variant used in Vietnam. From 1965 to 1968, 120 US M48A3 tanks were written off.[48]

Men of Troop B, 1st Squadron, 10th Cavalry Regiment, 4th Infantry Division, and their M48 Patton tank move through the dense jungle in the Central Highlands of Vietnam in June 1969.

The M48 Patton has the distinction of playing a unique role in an event that was destined to radically alter the conduct of armored warfare.[47] When US forces commenced redeployment operations, many of the M48A3 Pattons were turned over to the Army of the Republic of Vietnam (ARVN) forces, in particular creating the battalion-sized ARVN 20th Tank Regiment; which supplemented their M41 Walker Bulldog units. During the North Vietnamese Army (NVA) Easter Offensive in 1972, tank clashes between NVA T-54/PT-76 and ARVN M48/M41 units became commonplace. But, on 23 April 1972, tankers of the 20th Tank Regiment were attacked by an NVA infantry-tank team, which was equipped with the new 9M14M Malyutka (NATO designation: Sagger) wire-guided anti-tank missile. During this battle, one M48A3 Patton tank and one M113 Armored Cavalry Assault Vehicle (ACAV) were destroyed, becoming the first losses to the Sagger missile; losses that would echo on an even larger scale a year later during the Yom Kippur War in the Middle East in 1973.[47] By 2 May, 20th Tank Regiment had lost all of their tanks to enemy fire.[46]^:212 During the first month of the First Battle of Quảng Trị all ARVN M48 Pattons were lost.[lower-alpha 2][49]^:52

A 1st Battalion, 69th Armor Patton during Operation Lincoln

The M48s performed admirably[50] in Vietnam in the infantry-support role. However, there were few actual tank versus tank battles. One was between the US 1-69th Armor and PT-76 light amphibious tanks of the NVA 202nd Armored Regiment at Ben Het Camp in March 1969.[47] The M48s provided adequate protection for its crew from small arms, mines, and rocket-propelled grenades. South Vietnamese M48s and M41s fought in the 1975 Spring Offensive. In several incidents, the ARVN successfully defeated NVA T-34 and T-55 tanks and even slowed the North's offensive. However, due to shortages of fuel and munitions faced by the South Vietnamese military because of the US Congress-placed ban on the further funding and supply of military equipment and logistics to the country, the American-made tanks soon ran out of ammunition and fuel and were quickly abandoned to the NVA, which then put them in their service after the war ended in May 1975. In total, 250 of the ARVN's M48A3s were destroyed and captured[51]^:10 and those captured (at least 30) were only used briefly before being phased out and turned into war-memorial displays all over Vietnam.

A destroyed M48A3 during Vietnam war

M48s, along with Australian 20 pounder (84mm)-gunned[46]^:113 Centurions of the 1st Armoured Regiment,[47] were the only vehicles in use by the anti-communist side in the Vietnam War that could reasonably protect their crews from land mines. They were often used for minesweeping operations along Highway 19 in the Central Highlands, a two-lane paved road between An Khe and Pleiku. Daily convoys moved both ways along Highway 19. These convoys were held up each morning while the road was swept for mines. At that time, minesweeping was done by soldiers walking slowly over the dirt shoulders of the highway with hand-held mine detectors. During this slow process, convoys would build up into a dangerously-inviting target for the enemy, especially their guerillas and partisans. As a result, a faster method was improvised, the "Thunder Run", in which one M48 lined up on each side of the road, with one track on the dirt shoulder and the other track on the asphalt, and then with all guns firing,[46]^:80 they raced to a designated position miles away. If the M48s made it without striking a mine, the road was clear and the convoys could proceed. In most cases, an M48 that struck a land mine in these operations only lost a road wheel or two in the explosion; seldom was there any hull damage that would be considered a catastrophic kill.[46]

Supply of M48A3 tanks to South Vietnam:

• 1971: 54.[52]
• May 1972: 120.[53]^:135
• October 1972: 72.[53]^:135
• November 1972: 59.[46]^:218
• January 1973 - July 1974: 16.[54]
• Total: at least 321 M48 tanks. According to official US data 343 M48s were delivered to the ARVN up to March 1975.[55]

The United States lost at least 123 M48 tanks (non-repairable) during the war.[48] As a result, the United States with South Vietnam lost about 500 M48 tanks.

Indo-Pakistani Wars

M47s and M48s were used in tank warfare by the Pakistan Army against the Indian Army's Soviet T-55s, British Centurions and US M4 Sherman tanks in both the Indo-Pakistani War of 1965 as well as the following war in 1971 with at least some good results. During Operation Grand Slam, Pakistani tank forces, composed mainly of M47 and M48 Patton tanks, thrust through the Indian defence-lines very quickly and swiftly defeated back Indian Army armoured counter-attacks. The Pakistanis used approximately a division's worth of tanks in the operation, although not all were Pattons, with upgraded Shermans included as well. In contrast, Pakistan's Patton tank failed to live up to its high expectations in the Battle of Asal Uttar in September 1965, where about 97 Pakistani tanks were lost, the majority of them being Pattons (M47s and M48s). Later, the Patton tank was the main Pakistani tank at the Battle of Chawinda and its performance at that battle was deemed satisfactory against Indian armour.

The Patton was later used by Pakistan again, this time, in the Indo-Pakistani War of 1971. A counter-attack led by the 13th Lancers and the 31st Cavalry army units was defeated by the Indian 54th Division around Battle of Barapind in December 1971. The Pakistan Army Patton tanks could not stop an assault by Indian T-55 Soviet-supplied tanks of the 2nd Armored Brigade.[56] At least 9 of the Pattons were destroyed by T-55 tanks during the battle of Nainakot.[57]^:342 It total, more than 80 Pakistani Pattons were knocked out during battle, mainly by Centurion and T-55 fire.[56]

India later set up a temporary war-memorial so named "Patton Nagar" (or "Patton City") in Khemkaran District in Punjab, where the captured Pakistani Patton tanks were displayed for a short period of time before being scrapped or sent all across India for use as war monuments and military memorials.

Analysing their overall performance in their wars with India, the Pakistani military held that the Patton was held in reasonably-high esteem by both sides and that combat-tactics were to blame for their utter defeat and the following debacle at Asal Uttar. However, a post-war US study of the tank battles in South Asia concluded that the Patton's armor could, in fact, be penetrated by the 20-pounder tank gun (84 mm) of the Centurion (later replaced by the even-more successful L7 105mm gun on the Mk. 7 version which India also possessed) as well as the 75 mm tank gun of the AMX-13 light tank.

Middle East

An ex-Israeli M48 Patton tank captured by Egypt during the Yom Kippur War in 1973.

M48s were also used with mixed results during the Six-Day War of 1967. On the Sinai battlefront, Israeli M48s upgunned with the then-advanced 105 mm L7 rifled tank gun were used with considerable success against Egyptian IS-3s, T-54s/T-55s, T-34/85s and SU-100s supplied by the Soviet Union during the 1950s and the 1960s (such as during the Second Battle of Abu-Ageila. However, on the West Bank war-front, Jordanian M48s (Jordan was also a user of the M48 Patton as was Israel at the same time-period) were often defeated by Israeli 105mm-armed Centurions and WWII-era upgraded M4 Shermans (M-51s upgunned with French-built 105 mm tank guns (not to be confused with the British L7 105mm tank gun)). In purely-technical terms, the Pattons were far superior to the much-older Shermans, with shots at more than 1,000 meters simply glancing off the M48's armor. However, the 105 mm main gun of the Israeli Shermans fired a HEAT round designed to defeat the Soviet T-62 tank, which was the USSR's response to the M48's successor in US service, the M60 Patton. The Jordanian Pattons' general failure on the West Bank could also be attributed to excellent Israeli air superiority. The Israeli Army captured about 100 Jordanian M48 and M48A1 tanks and pressed them into service in their own units after the war, as were the Jordanian M113 APCs they seized during the war.

Israel used 445 M48 tanks in 1973 during the Yom Kippur War.[41]^:20 From 15 to 18 October, M48 tanks participated in the largest[58]^:34 tank battle of the war - Battle of the Chinese Farm. The battle involved the Egyptian 21st Armored Division (136 T-55s),[59] 25th Armored Brigade (75 T-62s),[60] tank battalion (21 T-55s) from 24th Armored Brigade (in the total 232 Egyptian tanks) and the Israeli 143rd and 162nd Armored Divisions (about 440 tanks).[61] The battle ended with an Israeli victory, but both sides lost a huge number of tanks in this battle (each side lost about two hundred tanks). On the night of 15/16 October, the Israeli 14th Brigade of the 143rd Division lost 70 tanks out of 97. Between the 16th at 0900 and the 17th at 1400, the Israeli 143rd and 162nd Divisions have lost 96 tanks.[62] As of 18 October the Egyptian 21st Armored Division had no more than 40 tanks remaining of an original 136 tanks available at the start of the battle[63]^:64, 25th Armored Brigade had only 10 tanks of an original 75 T-62s.[59]

Aside from the Israel Defense Forces (IDF), the M48 was also operated by the Lebanese Army, the Christian Lebanese Forces militia, the Druze Progressive Socialist Party's People's Liberation Army militia, and the Shia Amal militia. All the tanks seized by the militias were captured from the Army's mostly Shia 4th brigade which collapsed due to sectarian divisions in 1983. On 10 June 1982, eight Israeli M48A3s, two M60A1s and at least three M113 APCs were lost in a successful ambush by Syrian T-55 tanks and BMP-1 infantry fighting vehicles (IFVs) during the Battle of Sultan Yacoub in 1982.

A target QM48 struck by an AGM-65 Maverick missile during a weapons test.

The Lebanese Army still operates about 100 M48s. In 2007, during the 2007 North Lebanon conflict, Lebanese Army M48s shelled militant outposts located in a refugee camp.[64][65]

Together with the M47, M48 tanks were used by the Turkish Armed Forces during the Turkish invasion of Cyprus in 1974. The Turkish Armed Forces in Northern Cyprus continue to use M48 tanks today.

When the Kurdish–Turkish conflict began, the Turkish Armed Forces had a number of M48s. These were used throughout the 1980s and the 1990s as static artillery and was used in defending military-base perimeters from enemy attacks.

Iranian M48 tanks were used widely in the Iran–Iraq War from 1980 to 1988, where they faced Iraqi T-55s, T-62s and T-72s, alongside M60 Pattons, in fierce and harsh combat with their Iraqi foes, with mixed results. M48s of the 37th Armored Brigade were used in the Battle of Abadan. About 150 of M48s were lost in this tank battle alone.[66]^:362

Africa

In 1973, Morocco took delivery of its first M48A3s. By the end of the 1970s, further deliveries of M48A5 had occurred and the upgrade to M48A5 was achieved locally with the aid of US consultants. In 1987, a final shipment of 100 M48A5 tanks from the Wisconsin National Guard was delivered to the Moroccan army. There are unconfirmed reports of deliveries of Israeli M48A5s during the 1980s. The tanks were used in the Western Sahara desert against Polisario guerrillas.

Pakistan used M48 Pattons while reinforcing American troops during the Battle of Mogadishu in 1993.[67]^:324

Variants

• T48: Developmental prototypes designed in 1950 and used between 1951 and 1955.
• M48: Initial production variant with Mod A hull & turret designs featuring M41 90mm gun, M1 remote-controllable machine gun mount and AV-1790-5 or -7 gasoline engine. Deemed not fit for combat use in Europe, relegated to CONUS use only.
  • M48C: M48 with incorrect hull ballistic protection. Relegated by CONARC to the Armored Forces School at Fort Knox for non-ballistic training of crewmembers and maintenance personnel.
• M48A1: First variant to have M1 cupola and Mod B hull design. Fitted with external fuel drums to extend its range.
• M48A2: Redesigned hull with simplified suspension system and louvered engine access doors, AVI-1790-8 fuel-injected gasoline engine and Mod B turret design.
  • M48A2C: M48A2 fitted with M13 fire control system
• M48A3: Featured AVDS-1790-2A diesel engine and M1E1 cupola. Withdrawn from combat use in 1973, replaced by M60A1.
• M48A4: Proof of concept prototype mating the T95E4 turret to the M48A2 hull.
• M48A5PI: Early conversions of M48A1 hulls to the M48A5 standard. Retained the AVDS-1790-2A engine, CD-850-5A transmission and T97 track. All were further upgraded in 1976 with components from the M60A1 RISE Hull PIP Update Kit and redesignated M48A5.[68]
• M48A5: Featured M68 105mm gun, all metric-measurement M16 FCS, coax machine gun upgraded to M219 and a crew NBC protection system. Hull component upgrades included AVDS-1790-2C RISE engine, TLAC engine panels and T142 track. Some were fitted with the M19 cupola. All were relegated to the Army National Guard for CONUS training use. Replaced by the M60A3.
• QM48: M48A3 designation for target vehicles. Withdrawn from use by 1994 and replaced in role by QM60.

Specialized

• M48 AVLB: armored vehicle-launched bridge Former M48A3 with 60-foot (18 meters) scissors bridge mated to the M48A1/M48A2 hull. Most were upgraded with the M60 Hull PIP Update Kit.
• M48 Tagash AVLB: Israeli variant of the M48 AVLB. Former Jordanian M48A2s. Upgraded with Merkava-based track and suspension, upgraded engine and 2 Tzmed tandem bridge sections.[69]
• M67 Flame Thrower Tank "Zippo": An M48 tank armed with a flame thrower and a mock barrel and deflector. Named after a popular cigarette lighter.
• M48 Minenräumpanzer Keiler: German mine flail variant based on the M48A2 hull with upgraded 986hp German MTU 871 Ka501 diesel engine and Renk HSWL 284 M transmission. As of 2007 they were still in service.[70]
• M48 Marksman SPAAG (Self-Propelled Anti-Aircraft Gun): British short range air defense system designed by GEC-Marconi. Armed with two Oerlikon 35mm cannons mated to M48A2 hull. Not accepted for US service.
• M247 Sergeant York DIVAD (Division Air Defense): A short range air defense system designed by Ford Aerospace armed with 2 Bofors 40mm cannons mounted on the M48A1 hull incorporating component upgrades from the M60A1 Hull PIP Kit. Canceled by 1985.
• M48T5 Tamay: Turkish combat support vehicles based on the M48A2 hull designed by TLFC Kayseri and introduced at the IDEF Show at Ankara, Turkey in December 2005.[71]
  • M48T5 ARV (Armored Recovery Vehicle): The turret has been replaced with a welded armored superstructure that provides protection from shell fragments and small arms fire and a front-mounted stabilizer/dozer blade. It is fitted with a hydraulically operated winch with a maximum rated capacity of 70 tons and an auxiliary winch with a capacity of two tons. Both winches are located at the front of the vehicle.
  • M48T5 CEV (Combat Engineer Vehicle): Visually similar to the ARV and has the same two winches and a front-mounted stabilizer/dozer blade. The boom is mounted on the right side of the hull at the front but has an extendable jib that can be fitted with various attachments to meet specific engineer requirements, when used as a crane it has a lift capacity of seven tons. The boom can be traversed through 195 degrees.

Additional Equipment

• M8 Bulldozer Kit for the M48 tank series (SNL G278): The M8 bulldozer installed on the M48 series tank will increase the vehicle's weight by 4.45 tons (4.04 metric tons). It is controlled by the driver.

International

• E48 series: Foreign Military Sales designation for the M48 series
  • E48: modified M48/M48A1 variant for non-US service
  • E48A: modified M48A2 variant for non-US service
  • E48B: modified M48A3 variant for non-US service
  • E48C: modified M48A5 variant for non-US service
  • E48 AVLB: modified M48 AVLB variant for non-US service
• Israeli variants: Many of the Israeli M48s have been upgraded with additional reactive or passive armor. These up-armored versions are referred to as the Magach series.
  • Magach 1: Israeli M48A1/E48 variant armed with M41 90mm main gun. Different configurations exist.
  • Magach 2: Israeli M48A2/E48A variant armed with M41 main gun Some fitted with ERA and Urdan cupola. Different configurations exist.
  • Magach 3: Modernized Israeli M48A1/A2/A3. Armed with British 105mm L7A1 cannon, Urdan low profile commander's cupola, new communication suite and a AVDS-1790-2A 750 hp diesel engine. Most were eventually fitted with Blazer ERA. Different configurations exist.
  • Magach 5: Generally similar to the Magach 3, but with upgraded AVDS-1790-2D engine and CD-850-6A transmission. Most were fitted with Blazer ERA and Urdan cupola. Different configurations exist.
• Spanish variants:
  • M48A3E: M48A3/E48B variant with M68E1 105mm main gun, M17B1C rangefinder, M13A4 ballistic computer and AN/VSS-1(V)1 IR searchlight.[72]
  • M48A5E1: M48A5E with upgraded engine
  • M48A5E2: Hughes Mk7 fire control system with laser rangefinder & solid state ballistic computer and passive night vision equipment.
  • M48A5E3: Prototype vehicle. M48A5E2 fitted with gunner's IR thermal sight and a new gun stabilization system
• South Korean variants:
  • M48A3K: South Korean modified M48A3/E48C fitted with Laser Tank Fire Control System (LTFCS)
  • M48A5K1: 105mm KM68A1 main gun, digital fire control system, M1 cupola and steel side skirts
  • M48A5K2: Same as K1 but fitted with Urdan low profile cupola.
  • M48A5KW: Same as K2 but without side skirt armor
• Taiwanese variants:
  • M48A3 (Taiwan variant): M48/E48B variant with lower fuel capacity, Operational range lowered to 194 miles (312 km)
  • M48H/CM-11 Brave Tiger: M48/M60 hybrid variant mating the M48A3 turret to the M60A1 RISE hull. Included improved gun stabilization and new fire control system.
  • CM-12: M48A3/E48B variant upgraded with CM-11 FCS and weapons systems. Lower fuel capacity, range 126 miles (203km).
• Turkish variants:
  • M48A5T1: Turkish M48A5/E48C variant. Modifications include M68E1 105mm gun, M19 FCS, a passive night vision system and AVDS-1790-2C RISE diesel engine. Some fitted with M19 cupola.
  • M48A5T2: upgraded to M21 FCS, laser range finder and TTS thermal sight for the gunner.
• West German variants: As a member of NATO, West Germany acquired a large fleet of M48 tanks.
  • Kampfpanzer M48A2CGA1: West German M48A2/E48A armed with 90mm M41 main gun with a cylindrical blast deflector.
  • Kampfpanzer M48A2GA2: West German upgrade mounting M68 105mm cannon and MG3 coaxial machine gun, along with the MTU 871 diesel engine. Some were fitted with the M8 Bulldozer kit.[70]
• M48A5 MOLF: (MOdular Laser Fire) Greek M48A5/E48C variant fitted with EMES-18 fire control system.
• Zulfiqar-1: Iranian modernized M48A3/A5 variant developed in the mid 1990s, armed with a Russian 2A46 125mm smoothbore main gun.[73]
• Super M48: West German modular update offered in 1994 by Krauss Maffei and Wegmann and other partners for the M48A2/A3. Upgrades included Applique armor panels for the turret, NBC protection system, MOLF 48 fire control, laser rangefinder, upgraded engine and transmission. Armed with L7A3 105mm gun. Only 5 prototypes built.[74]

Operators

Map of M48 Patton operators in blue with former operators in red

Current operators

•  Greece: 390 M48A5 MOLF.
•  Germany: 20 Minenräumpanzer Keiler in service as of 2007
•  Iran: 180 M48A5.
•  Lebanon: 104 M48A5.
•  Morocco: 225 M48A5.
•  Poland: 4 Minenräumpanzer Keiler, transferred from Germany.
•  South Korea: Around 300 M48A3K and 500 M48A5K1/K2 are in service. M48A3K are expected to be replaced by the K2 Black Panther in the distant future. Most of the M48A3K are used in reserve, but the South Korean military continues to use a few tanks in active service. However, the South Korean M48A3Ks are being replaced with K-1 tanks.
•  Taiwan: 450 CM-11, 100 CM-12[75]
•  Thailand: 105 M48A5PI.
•  Turkey: 758 M48A5T2 in service. All other variants, 2,250 pieces including the 1,389 M48A5T1 are phased out of active service.

Former operators

•  Belgium: Only M48 AVLBs.
•  Iraq: Limited ad hoc use of captured Iranian tanks during Iran–Iraq War.[76] Any remaining tanks scrapped after the war. It was never officially in Iraqi service.
•  Israel: 561 Magach 5 Golan.[75]
•  Jordan: 200 M48A1.
•  Norway: 38 M48A5.
•  Pakistan: 300 M48A5's in active service till 2002, Currently in Reserve.[77]
•  Portugal: 58 M48A5 ordered between 1965 and 1968, 12 lost in Angola and Mozambique, rest phased out and replaced by M60A3 TTS and 38 Leopard-2A6's in the 2000s.
•  North Vietnam: Limited ad hoc use of captured US and SVA tanks during the Vietnam War. It was never officially in service with the Socialist Republic of Vietnam. Many are displayed as war memorials.
•  South Vietnam: Few hundred
•  Spain: 164 M48A5E.
•  Tunisia: 28.
•  West Germany active service through 1993
•  United States of America

Non-state former operators

• Lebanese Forces: 7 M48A5's captured in 1984 from the Lebanese Army and returned in 1991.[78]^:63–64
• People's Liberation Army: 7 M48A5's captured in 1984 from the Lebanese Army and returned in 1991.[79]^:59

See also

• M46 Patton
• M47 Patton
• M60 tank
• M88 Recovery Vehicle – armored recovery variant based on the M48 Patton/M60 Series tanks chassis and part of the automotive component.
• M103 heavy tank
• List of armoured fighting vehicles
• G-numbers – SNL G254
• NSN codes for the M48 tank series:[80]
  • M48: 2350-00-736-4202 NIIN: 007364202
  • M48A1: 2350-00-301-8456 NIIN: 003018456
  • M48A2: 2350-00-346-7560 NIIN: 003467560
  • M48A3: 2350.00-895-9154 NIIN: 008959154
  • M48A5: 2350-00-582-5595 NIIN: 005825595

Tanks of comparable role, performance and era

• T-55 – a contemporary Soviet design
• Centurion – a contemporary British design
• Type 59 - a contemporary Chinese design
• Type 61 – a similarly armed Japanese design

Notes

1. These AVI engines used a light blended gasoline (MOGAS) with a low-pressure (20 psi (140 kPa)) fuel-injection system and were rated at 810 hp (600 kW). No gasoline engines with the AVSI designation (air-cooled, V12, Supercharged, Fuel Injected) were used in the combat tanks. This engine designation was only found in the M88 ARV and was rated at 1,050 hp (780 kW) @ 2800 RPM.
2. 1st Armor Brigade lost 43 M48s and 66 M41s, 20th Tank Regiment lost 57 M48s

References

1. Hunnicutt (2015), Patton
2. Standard Military Vehicle Characteristic Data Sheets (Report). Center Line, Michigan. Army Tank and Automotive Command Research & Engineering Directorate. 1 July 1960.
3. Maloney, Bill (29 November 2010). "Patton Museum - M48A3 Patton Tank". williammaloney.com. Archived from the original on 22 October 2019. Retrieved 5 March 2020.
4. Crismon, Fred (1 July 1992). U.S. Military Tracked Vehicles. Crestline Series (1st ed.). Osceola, Wisconsin: Motorbooks International. ISBN 978-0879386726. OCLC 26013467.
5. Christopher F. Foss (1989). Jane's Armour and Artillery 1989-90 (10th ed.). London, United Kingdom: Jane's Information Group. ISBN 978-0710608857. OCLC 464003018. OL 11240704M.
6. Terry, T. W.; Jackson, S. R.; Ryley, C. E. S.; Jones, B. E.; Wornell, P. J. H. (1 October 1991). "A History of the Development and Production of the M48 90mm Gun Tank". Fighting Vehicles. Battlefield Weapons Systems & Technology (Book 7) (2nd ed.). Potomac Books Inc. Ordance Tank-Automative Command. ISBN 978-0080367057. OCLC 898874952.
7. Bocquelet, David (18 November 2014). "76mm Gun Tank M41 Walker Bulldog". tanks-encyclopedia.com. Archived from the original on 24 September 2019. Retrieved 5 March 2020.
8. Icks, Robert J. (1 February 1971). M48-M60 Series of Main Battle Tanks. AFV Weapons Profile. Profile Publications Ltd. ASIN B0030LI49A. OCLC 54311975.
9. Cameron, Robert (1 July 1998). "American Tank Development During The Cold War" (PDF). Armor. U.S. Army Armor Center. CVII (4): 30–36. ISSN 0004-2420. OCLC 44288631. Retrieved 5 March 2020.
10. Clarke, Bruce C. (1 September 1960). Future Tank Requirement. Armor (Report). U.S. Army Armor Center. ISSN 0004-2420. OCLC 44288631.
11. Hilmes, Rolf (1 November 1987). Main Battle Tanks: Developments in Design Since 1945 (in English and German) (1st ed.). Potomac Books Inc. ISBN 978-0080347561. LCCN 87002396. OCLC 15221901. OL 2374252M.
12. Bocquelet, David (17 November 2014). "90mm Gun Tank M48 Patton III". tanks-encyclopedia.com. Archived from the original on 27 December 2019. Retrieved 5 March 2020.
13. Standard Military Vehicle Characteristic Data Sheets. Center Line, MI: Army Tank and Automotive Command Research & Engineering Directorate, July 1960
14. Hunnicutt, R.P. Patton: A History of the American Main Battle Tank, volume 1. Navato, CA: Presidio Press, 1984
15. Alex, Dan (24 February 2020). "M48 Patton Medium Tank". militaryfactory.com. Archived from the original on 28 January 2020. Retrieved 6 March 2020.
16. Rolf Hilmes, Main Battle Tanks: Developments in Design since 1945 (McLean, Va.: Pergamon-Brassey's International Defense Publishers, 1987), p. 11; Zaloga and Loop, Modern American Armor
17. Salter, Charles B.; Spiro, Harry (8 November 1958). AD0524050: Evaluation of Siliceous Cored Armor for the XM60 Tank (Report). Defense Technical Information Center. Ordance Tank-Automative Command. ASIN B009B3DE1Y. Retrieved 6 March 2020 – via Internet Archive.
18. Conners, Chris (28 October 2019). "90mm Gun Tank M48 Patton 48". American Fighting Vehicle Database. Archived from the original on 26 August 2019. Retrieved 6 March 2020.
19. https://patents.google.com/patent/US4760770A/en
20. Ogorkiewicz, Richard M (1 July 1991). Technology of Tanks. 1. Jane's Information Group. ISBN 978-0710605955. LCCN 97142050. OCLC 636155271. OL 748351M. Retrieved 6 March 2020 – via Internet Archive.
21. Final Report of United States Army Armor Policy Conference, 15-19 November 1954 (Report). Section V. Falkovich Papers. PTM Archives. 19 November 1954. Box 2.
22. "$200,000,000 Tank Order". The New York Times. The New York Times Company. 1 September 1952. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 20 September 2018. Retrieved 20 September 2018.
23. Abel, Elie (1 July 1952). "Army Ushers in 'Finest Medium Tank'". The New York Times. The New York Times Company. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 20 September 2018. Retrieved 20 September 2018.
24. TM 9-718A: 90-mm GUN TANK M47 (PDF). United States Government Publishing Office. Department of the Army. 9 January 1952 – via Internet Archive.
25. Hueger, Andreas. "The M47 Tank". patton-mania.com. Archived from the original on 20 July 2019. Retrieved 6 March 2020.
26. Baldwin, Hanson W. (25 January 1952). "Armor Tribute Timely; General Collins Comes Out for Tanks, but Program Is Still Slow and Unsure". The New York Times. The New York Times Company. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Retrieved 6 March 2020.
27. Pike, John (22 July 2016). "M48 Patton". globalsecurity.org. GlobalSecurity.org. Archived from the original on 28 January 2020. Retrieved 6 March 2020.
28. Jackson, David D. (8 January 2020). "Detroit Transmission (Hydra-Matic) Division of General Motors Corporation in World War Two". usautoindustryworldwartwo.com. Archived from the original on 15 March 2014. Retrieved 6 March 2020.
29. Icks, Robert J. (1 February 1971). M48-M60 Series of Main Battle Tanks. AFV Weapons Profile. Profile Publications Ltd. ASIN B0030LI49A. OCLC 54311975.
30. "ARMY AWARDS G. M. BIG TANK CONTRACT; CHRYSLER BID LOSES; General Motors Will Become Sole Producer by Spring -- Shares in Truck Orders G. M. WINS AWARD OF TANK CONTRACT". The New York Times. The New York Times Company. 11 September 1952. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 18 September 2018. Retrieved 18 September 2018.
31. "Chrysler Is Given A Tank Contract". The New York Times. 29 September 1954. p. 1. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 18 September 2018. Retrieved 18 September 2018.
32. "73 MILLION ORDER FOR TANKS IS LET; Army Contract Goes to Alco Products -- Service Reduces Armored Vehicle Output". New York Times (Print). The New York Times Company. 3 November 1954. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 18 September 2018. Retrieved 18 September 2018.
33. "ARMY TANK ORDER GOES TO CHRYSLER; Delaware Production to Save 1.8 Million on a Contract Totaling 119 Million Some Modification Work Williams Sees 'Politics' Alto Says No More Tanks". The New York Times. The New York Times Company. Associated Press. 31 May 1957. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 18 September 2018. Retrieved 18 September 2018.
34. Abel, Elie (10 December 1952). "Auto Makers Hail '53 Output Ruling". New York Times (Print). The New York Times Company. eISSN 1553-8095. ISSN 0362-4331. OCLC 1645522. Archived from the original on 18 September 2018. Retrieved 18 September 2018.
35. https://www.worldcat.org/title/armor/oclc/44288631page=11
36. Hunnicutt, Richard P. (2015) [1984]. Patton. A History of the American Main Battle Tank. Volume 1 (Reprint ed.). Echo Point Books & Media. ISBN 978-1626541597. pgs q23-127
37. Hofmann, George F.; Starry, Donn A., eds. (12 August 1999). Camp Colt to Desert Storm: The History of U.S. Armored Forces. University Press of Kentucky. ISBN 978-0813121307. JSTOR j.ctt5hk0cp. LCCN 99028924. OCLC 868018525. OL 8022441M.
38. ADA141935: M60A1, M60A1 RISE, AND M60A1 RISE (PASSIVE) SERIES TANKS, COMBAT, FULL-TRACKED 105-MM GUN UPDATE SYSTEM ASSESSMENT (PDF) (Report). Defense Technical Information Center. Ordance Tank-Automative Command. 1 May 1980. Archived (PDF) from the original on 26 October 2019. Retrieved 6 March 2020.CS1 maint: others (link)
39. Tencza, T.M. "1963 - USA M48A3 Medium Tank Patton". battletanks.com. Archived from the original on 11 October 2015. Retrieved 8 October 2015.
40. Smith, Nicholas (19 July 2018). "The Beast of Budapest". historynet.com. World History Group. Archived from the original on 18 October 2019. Retrieved 6 March 2020.
41. Nordeen, Lon; Isby, David (21 September 2010). M60 vs T-62: Cold War Combatants 1956–92. Duel (Book 30). Illustrated by Richard Chasemore (First ed.). Osprey Publishing. ISBN 978-1846036941. LCCN 2010525413. OCLC 495780787. OL 24846591M – via Internet Archive.
42. https://aw.my.com/us/news/general/development-m48a3
43. Rolf Hilmes, Main Battle Tanks: Developments in Design since 1945 (McLean, Va.: Pergamon-Brassey's International Defense Publishers, 1987), pp. 11–18; Zaloga and Loop, Modern American Armor
44. http://www.patton-mania.com/M48_Patton/m48_patton.html
45. "Data" (PDF). apps.dtic.mil. Retrieved 22 May 2020.
46. Starry, Don A. (1979). Mounted Combat in Vietnam (PDF) (Report). Vietnam Studies. United States Government Publishing Office. US Army. ISBN 978-1782893660. LCCN 78012736. OCLC 983465420. OL 4725093M. Archived (PDF) from the original on 19 April 2019. Retrieved 6 March 2020 – via United States Army Center of Military History.
47. Dunstan, Simon (1982). Vietnam tracks: Armor in battle 1945-75. Presidio Press. ISBN 978-0891411710. LCCN 83116585. OCLC 654146627. OL 3210048M – via Internet Archive.
48. Никольский, Михаил. "M48. Михаил Никольский. Техника и Вооружение №7 2000" [M48. Mikhail Nikolsky. Equipment and Armament №7 2000]. armor.kiev.ua (in Russian). Archived from the original on 2 September 2019. Retrieved 7 March 2020.
49. Trưởng, Ngô Quang (1 January 1979). The Easter offensive of 1972. Indochina Monographs. Book 5. Pickle Partners Publishing. ISBN 978-1786254597. OCLC 973834124.
50. Nolan, Keith William (1987). Into Laos: The Story of Dewey Canyon II / Lam Son 719: Vietnam 1971 (1st ed.). Presidio Press. ISBN 978-0440200444. OCLC 17887412. OL 7518446M.
51. "Captured US Arms Bolster Vietnam Might". Albuquerque Journal. Albuquerque, New Mexico. 15 November 1976. ISSN 1526-5137. Archived from the original on 18 April 2019. Retrieved 13 April 2019 – via Newspapers.com.
52. Hatcher, Michael (2015). "Report from the field: ARVN 20th Tank Regiment". United States Army Center of Military History.
53. Moïse, Edwin E (21 July 2005). The A to Z of the Vietnam War. The A to Z Guide Series. Book 9 (Revised ed.). Scarecrow Press. ISBN 978-0810853331. LCCN 2005282682. OCLC 863158135. OL 3437006M.
54. Better Management of Secondary Items by the Republic of Vietnam Armed Forces Would Reduce U.S. Investment; Department of Defense: Report to the Congress by the Comptroller General of the United States. United States. General Accounting Office. U.S. General Accounting Office. 1975. p. 8
55. Military posture and procurement of aircraft, missiles, tracked combat vehicles, torpedoes, and other weapons, Title I, H.R. 3689. General provisions, Title VII, H.R. 3689. United States. Congress. House. Committee on Armed Services. U.S. Government Printing Office, 1975. pp. 554, 555
56. "Indo-Pak tank warfare scenario". strategic-affairs.com. Archived from the original on 15 September 2019. Retrieved 7 March 2020.
57. Chakravorty, Birendra Chandra (1995). Thapliyal, Uma Prasad (ed.). Stories of heroism: PVC & MVC winners. Allied Publishers. ISBN 978-8170235163. OCLC 503187946. OL 637150M.
58. Zaloga, Steven J. (18 August 2009). T-62 Main Battle Tank 1965–2005. New Vanguard. Book 158. Illustrated by Tony Bryan (1st ed.). Osprey Publishing. ISBN 978-1846033902. LCCN 2009502076. OCLC 650085634. OL 25562728M. Retrieved 7 March 2020 – via Internet Archive.
59. Reshef, Amnon (24 January 2008). "כיבוש "הגדה הקרובה" – "החווה הסינית" – 15-16.10.73" [Occupation of the "Near West Bank" - "Chinese Farm"]. hativa14.com (in Hebrew). Archived from the original on 20 April 2019. Retrieved 7 March 2020.
60. Zayed, Ahmed Abdel-Moneim (2013). "كل ما تريد أن تعرفه عن - الثغرة" [All You Want To Know About "The Defresoar Gab Battle"]. group73historians.com (in Arabic). Archived from the original on 10 December 2019. Retrieved 7 March 2020.
61. "Suez Canal 1973 war maps". steelbeasts.com. 2019. Archived from the original on 8 March 2020. Retrieved 8 March 2020.
62. Razoux, Pierre (21 June 1999). La guerre du Kippour d'octobre 1973 [The Yom Kippur War of October 1973]. CAMPAGNES ET ST (in French). Book 30. Economica. eISSN 1468-0335. ISBN 978-2717838138. ISSN 0013-0427. JSTOR 130427. LCCN 22023854. OCLC 878432332. OL 12529082M.
63. Gawrych, George W. (30 March 2000). The Albatross of Decisive Victory: War and Policy Between Egypt and Israel in the 1967 and 1973 Arab-Israeli Wars. Contributions in Military Studies. Book 188. Praeger. ISBN 978-0313313028. OCLC 912514280. OL 9418338M. Retrieved 8 March 2020 – via Internet Archive.
64. "Lebanese troops tighten siege of camp". Ynet. Yedioth Ahronoth. Associated Press. 21 May 2007. Archived from the original on 27 June 2018. Retrieved 6 March 2020.
65. Гилад, Дов (3 July 2004). "Бой у Султан-Яакуб" [Fight at Sultan-Yaakub]. waronline.org (in Russian). Archived from the original on 15 January 2015. Retrieved 8 March 2020.
66. Farrokh, Kaveh (24 May 2011). Iran at War: 1500-1988. Osprey Publishing. ISBN 978-1846034916. LCCN 2011281478. OCLC 804375019. OL 24886483M. Retrieved 8 March 2020 – via Internet Archive.
67. Bowden, Mark (10 February 1999). Black Hawk Down: A Story of Modern War (1st ed.). Atlantic Monthly Press. ISBN 978-0871137388. OCLC 1119667544. OL 7574331M. Retrieved 8 March 2020 – via Internet Archive.
68. Hunnicutt (2015), Patton
69. "Israel's Wars & Operations Table of Contents". www.jewishvirtuallibrary.org.
70. "M48 Patton". 18 November 2014.
71. https://www.armyrecognition.com/News/2005/December/Military_News_december_2005_UK.htm
72. "M48 Patton". www.patton-mania.com.
73. "Zulfiqar Zolfaqar 1 main battle tank technical data sheet specifications description pictures video | Iran Iranian army heavy armoured main battle tank UK | Iran Iranian army military equipment armoured UK". Armyrecognition.com. 3 February 2013. Retrieved 22 May 2020.
74. "Super M48 Prototype Main Battle Tank | Military-Today.com". www.military-today.com.
75. Pike, John (28 July 2019). "Taiwan Army Equipment". globalsecurity.org. GlobalSecurity.org. Archived from the original on 29 June 2019. Retrieved 6 March 2020.
76. Former Equipment of Iraqi Army. Archive.org. Archived from the original on 3 April 2016. Retrieved 17 July 2018.
77. Pike, John. "Pakistan Army Equipment". globalsecurity.org. GlobalSecurity.org. Archived from the original on 12 June 2018. Retrieved 8 March 2020.
78. Zaloga, Steven J. (1998). Tank Battles of the Mid East Wars: (2) The Wars of 1973 to the Present. Armor at War (First ed.). Concord Publications. ISBN 978-9623616133. OCLC 464148452. OL 27090763M. Retrieved 8 March 2020 – via Internet Archive.
79. Kassis, Samer (2006). 30 ans de véhicules militaires au Liban, 1975-2005 [30 years of military vehicles in Lebanon, 1975-2005] (in French). Elite groupe. ISBN 978-9953007052. OCLC 496027616.
80. https://www.nsncenter.com/

Bibliography

• Higgins, David R. (2016). M48 Patton vs Centurion: Indo-Pakistani War 1965. Duel 71. Illustrated by Johnny Shumate and Alan Gilliland (First ed.). Osprey Publishing. ISBN 978-1472810922. OCLC 947095346.
• Hunnicutt, Richard P. (2015) [1984]. Patton. A History of the American Main Battle Tank. Volume 1 (Reprint ed.). Echo Point Books & Media. ISBN 978-1626541597. LCCN 84016586. OL 2854160M.
• Rabinovich, Abraham (1972). The Battle for Jerusalem: June 5-7, 1967 (1st ed.). Jewish Publication Society of America. ISBN 978-9657287071. OCLC 947062697.
• Zaloga, Steven J. (25 November 2000). M26/M46 Pershing Tank 1943–53. New Vanguard 35. Illustrated by Tony Bryan and Jim Laurier (1st ed.). Osprey Publishing. ISBN 978-1841762029. OL 8922180M. Retrieved 2 March 2020.

External links

• GlobalSecurity.org: M48 Patton
• M48 Patton at U.S. Veterans Memorial Museum
• The short film Birth of a Tank - 1950's United States Army Educational Documentary is available for free download at the Internet Archive