Honda K engine
The Honda K-series engine is a line of four-cylinder four-stroke car engine introduced in 2001. The K-series engines are equipped with DOHC valvetrains and use roller rockers to reduce friction. The engines use a coil-on-plug, distributorless ignition system with a coil for each spark plug. This system forgoes the use of a conventional distributor-based ignition timing system in favor of a computer-controlled system that allows the ECU to control ignition timings based on various sensor inputs. The cylinders have cast iron sleeves similar to the B- and F-series engines, as opposed to the FRM cylinders found in the H- and newer F-series engines found only in the Honda S2000.
Similar to B series, the K-series car engines have two short blocks with the same design; the only difference between them being the deck height. K20 uses the short block with a deck height of 212mm where K23 and K24 block has a deck height of 231.5mm.[1]
Two versions of the Honda i-VTEC system can be found on a K-series engine, and both versions can come with variable timing control (VTC) on the intake cam. The VTEC system on engines like the K20A3 only operate on the intake cam; at low rpm only one intake valve is fully opened, the other opening just slightly to create a swirl effect in the combustion chamber for improved fuel atomization. At high rpm, both intake valves open fully to improve engine breathing. In engines such as the K20A2 found in the Acura RSX Type-S, the VTEC system operates on both the intake and exhaust valves, allowing both to benefit from multiple cam profiles. A modified K20C engine is used in motorsport, as the Sports Car Club of America Formula 3 and 4 series that run in North America both use a K20C engine, with the Formula 4 engine not having a turbocharger. These are gaining a following in the import scene, but also among hot rodders and kit car enthusiasts, because they can be put in longitudinal rear wheel drive layouts.
K20
K20A
Honda K20A | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2001–2011 |
Layout | |
Configuration | I4 |
Displacement | 2.0 L; 121.9 cu in (1,998 cc) |
Cylinder bore | 86 mm (3.386 in) |
Piston stroke | 86 mm (3.386 in) |
Head material | NSH 14 |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Fuel system | Fuel injection |
Management | ECU |
Fuel type | Petrol |
Cooling system |
|
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
Dimensions | |
Dry weight | 403lbs (with gearbox), 275lbs (without gearbox) |
- Applications
Engine | Application | Compression | Power | Torque | Redline | Rev limiter | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|---|---|---|---|
K20A | 2001–2006 Honda Civic Type R (JDM) | 11.5:1 | 212 hp (158 kW) @ 8000 RPM | 149 lb⋅ft (202 N⋅m) @ 7000 RPM | 8400 RPM | 6000 RPM | PRC | |
2001–2006 Honda Integra Type R (JDM) | 11.5:1 | 217 hp (162 kW) @ 8000 RPM | 152 lb⋅ft (206 N⋅m) @ 7000 RPM | 8400 RPM | 8600 RPM | 6000 RPM | PRC | |
2002–2008 Honda Accord Euro R (JDM) | 11.5:1 | 217 hp (162 kW) @ 8000 RPM | 152 lb⋅ft (206 N⋅m) @ 6000 RPM | 8400 RPM | 6000 RPM | RBC | ||
2007–2011 Honda Civic Type R (JDM) | 11.7:1 | 221 hp (165 kW) @ 8000 RPM | 159 lb⋅ft (215 N⋅m) @ 6100 RPM | 8600 RPM | 5800 RPM | RRC | ||
K20A1 | 2001–2006 Honda Stream (RN3, FWD) | 9.7:1 | 156 hp (116 kW) @ 6500 RPM | 139 lb⋅ft (188 N⋅m) @ 4000 RPM | 6800 RPM | |||
2001–2006 Honda Stream (RN4, AWD) | 9.8:1 | 158 hp (118 kW) @ 6500 RPM | 140 lb⋅ft (190 N⋅m) @ 4000 RPM | 6800 RPM | ||||
K20A2 | 2001–2006 Honda Civic Type R (EDM) | 11.0:1 | 200 hp (150 kW) @ 7400 RPM | 139 lb⋅ft (188 N⋅m) @ 5900 RPM | 7900 RPM | 8250 RPM | 5800 RPM | |
2002–2004 Acura RSX Type S | 11.0:1 | 200 hp (149 kW) @ 7400 RPM | 142 lb⋅ft (193 N⋅m) @ 6000 RPM | 7900 RPM | 8250 RPM | 5800 RPM | PRB | |
2002–2004 Honda Integra Type R (AUDM/NZDM) | 11.0:1 | 200 hp (149 kW) @ 7400 RPM | 142 lb⋅ft (193 N⋅m) @ 6000 RPM | 7800 RPM | 8100 RPM | 5800 RPM | ||
K20A3 | 2002–2006 Acura RSX | 9.8:1 | 160 hp (119 kW) @ 6500 RPM | 142 lb⋅ft (193 N⋅m) @ 4000 RPM | 6800 RPM | 7000 RPM | 2300 RPM[2] | |
2002–2005 Honda Civic Si | 9.8:1 | 160 hp (119 kW) @ 6500 RPM | 141 lb⋅ft (191 N⋅m) @ 4000 RPM | 6800 RPM | 2300 RPM | PRB | ||
2002–2005 Honda Civic SiR | 9.8:1 | 160 hp (119 kW) @ 6500 RPM | 141 lb⋅ft (191 N⋅m) @ 4000 RPM | 6800 RPM | 2300 RPM | |||
2002–2005 Honda Civic Type S | 9.8:1 | 160 hp (119 kW) @ 6500 RPM | 132 lb⋅ft (179 N⋅m) @ 4000 RPM | 6800 RPM | 2300 RPM | |||
2003–2006 Honda Civic 2.0 i-VTEC (SEA) | 9.8:1 | 155 hp (116 kW) @ 6500 RPM | 131 lb⋅ft (177 N⋅m) @ 5000 RPM | 6800 RPM | ||||
K20A4 | 2002–2006 Honda CR-V (SEA) | 9.8:1 | 150 hp (112 kW) @ 6500 RPM | 140 lb⋅ft (190 N⋅m) @ 4000 RPM | 6800 RPM | |||
K20A6 | 2003–2006 Honda Accord (EDM) | 9.8:1 | 155 hp (116 kW) @ 6500 RPM | 140 lb⋅ft (190 N⋅m) @ 4000 RPM | 6800 RPM | 2500 RPM | ||
2003–2006 Honda Accord (ADM) | 9.8:1 | 155 hp (116 kW) @ 6500 RPM | 140 lb⋅ft (190 N⋅m) @ 4000 RPM | 6800 RPM | 2500 RPM | |||
K20A7 | 2003–2007 Honda Accord (SEA) | 9.8:1 | 150 hp (112 kW) @ 6000 RPM | 137 lb⋅ft (186 N⋅m) @ 4500 RPM | 6800 RPM | |||
K20A9 | 2004-2007 Honda FR-V (EDM) | 9.8:1 | 150 hp (112 kW) @ 6500 RPM | 142 lb⋅ft (192 N⋅m) @ 4000 RPM | 6800 RPM | 2500 RPM |
- Additional notes
K20A Spec R engine (FD2 Civic Type R)
- Chromoly flywheel, higher-tensile strength connecting rods, high-compression pistons, stiffer valve springs, higher-lift hollow camshafts with more duration, and 2007–2011 cylinder-head intake-port and exhaust-port surface polishing used in NSX-R.[3] The JDM K20A type-R engine block would be removed from production assembly line by an experienced Honda engine technician to torque the connecting rod bolts to factory specification by hand using micrometer to measure connecting rod bolt stretching. Then the JDM K20A type-R engine block would be returned to the production assembly line to complete the engine building process.
K20A1 & K20A3 (Eco Engine)
- Found in:
- 2001-2006 Honda Integra Type S (DC5)
- 2000-2005 Honda Stream S (RN3) (front drive)
- 2000-2005 Honda Stream S (RN4) (all-wheel drive)
- 2004-2009 Honda Edix (front drive and all-wheel drive)
- 2005-2008 Honda Accord Sedan (front drive and all-wheel drive)
- 2005-2008 Honda Accord Wagon (front drive only)
- 2006-2010 Honda Civic Sedan (GL)
- DOHC i-VTEC
- Power and Torque may vary by the Compression Ratio, Intake manifold, and Exhaust manifold
- Power: 155 hp@6500rpm; 158 hp@6500rpm
- Torque: 138 lb-ft@4000rpm; 140 lb-ft@4000rpm
- Redline 6800rpm
- Compression: 9.7:1; 9.8:1
- Bore X Stroke: 86mm x 86mm
- Displacement: 1998cc
K20B
Honda K20B | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2004–2006 |
Layout | |
Configuration | L4 |
Displacement | 2.0 L; 121.9 cu in (1,998 cc) |
Cylinder bore | 86 mm (3.386 in) |
Piston stroke | 86 mm (3.386 in) |
Valvetrain | DOHC |
Compression ratio | 10.0:1 |
Combustion | |
Fuel system | Direct fuel injection |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | 156 hp (116 kW) @ 6300 rpm |
Torque output | 139 lb⋅ft (188 N⋅m) @ 4600 rpm |
- Injection Pressure: 10 megapascals (99 atm)
- Center Fuel Injection with swirl guide
- Air-Fuel Ratio:
- Normal driving cycle: 65:1 (ultra-lean combustion)
- Acceleration/High load driving cycle: 14.7:1 (Stoichiometric)
- Deep Piston Cavity formed in top of Pistons
- Application: 2004–2006 Honda Stream Absolute
K20C
Honda K20C | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2015-present |
Layout | |
Configuration | L4 |
Displacement | 2.0 L; 121.8 cu in (1,996 cc) |
Cylinder bore | 86 mm (3.386 in) |
Piston stroke | 85.9 mm (3.382 in) |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Turbocharger | 1 (Except K20C2) |
Fuel system | Direct fuel injection (Except K20C2) |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
- Applications
Engine | Application | Compression | Power | Torque | Redline | Rev limiter | i-VTEC engagement |
---|---|---|---|---|---|---|---|
K20C1 | 2015–present Honda Civic Type R (EDM)
2017–present Honda Civic Type R (USDM) |
9.8:1 | 306–316 hp (228–236 kW) @ 6500 RPM | 295 lb⋅ft (400 N⋅m) @ 2500 RPM | 7000 RPM | 7000 RPM | |
K20C2 | 2016–present Honda Civic LX Sedan & Coupe (USDM)
2016–2018 Honda Civic EX Sedan (USDM) 2019-present Honda Civic Sport Sedan & Coupe (USDM) |
10.8:1 | 158 hp (118 kW) @ 6500 RPM | 138 lb⋅ft (187 N⋅m) @ 4200 RPM | 6700 RPM[4] | 7000 RPM | 6100 RPM 6500 RPM (with CVT) |
2016–present United States Formula 4 Championship | 10.8:1 | 158 hp (118 kW) @ 6500 RPM | 138 lb⋅ft (187 N⋅m) @ 4200 RPM | 6800 RPM | 7000 RPM | 6100 RPM | |
K20C3 | 2016–present Honda Avancier/UR-V (China) | 10.8:1 | 268 hp (200 kW) @ 6500 RPM | 273 lb⋅ft (370 N⋅m) @ 4200 RPM | 6100 RPM | ||
K20C4 | 2018–present Honda Accord
(Sport, EX-L & Touring 2.0T trims) |
9.8:1 | 252 hp (188 kW) @ 6500 RPM | 273 lb⋅ft (370 N⋅m) @ 1500-4000 RPM | 6800 RPM | ||
2019–present Acura RDX |
9.8:1 | 272 hp (203 kW) @ 6500 RPM | 280 lb⋅ft (380 N⋅m) @ 1600-4500 RPM | 6800 RPM | |||
K20C6 | 2021 Acura TLX (non-Type S) | 9.8:1 | 272 hp (203 kW) @ 6500 RPM | 280 lb-ft (380 N-m) @ 1600-4500 RPM | 6800 RPM |
- Additional notes
- Earth Dreams Technology
- K20C1: First Honda Type R engine to be built in the US at the Honda Anna Engine Plant in Anna, Ohio.
- Although the K20C4 in the Acura RDX and the K20C6 in the Acura TLX share the same internals, they are named differently due to different engine mount points to accommodate the sedan body of the TLX.
K20Z
Honda K20Z | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2005–2015 |
Layout | |
Configuration | L4 |
Displacement | 2.0 L; 121.9 cu in (1,998 cc) |
Cylinder bore | 86 mm (3.386 in) |
Piston stroke | 86 mm (3.386 in) |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Fuel system | Fuel injection |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
- Applications
Engine | Application | Compression | Power | Torque | Redline | Rev limiter | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|---|---|---|---|
K20Z1 | 2005–2006 Acura RSX Type S | 11.0:1 | 210 hp (160 kW) @ 7800 RPM[lower-alpha 1] | 143 lb⋅ft (194 N⋅m) @ 6200 RPM | 8100 RPM | 8300 RPM | 5800 RPM | PRB |
2005–2006 Honda Integra Type S (AUDM/NZDM) | 11.0:1 | 210 hp (160 kW) @ 7800 RPM | 143 lb⋅ft (194 N⋅m) @ 6200 RPM | 8100 RPM | 8300 RPM | 5800 RPM | ||
K20Z2 | 2006–2011 Acura CSX | 9.8:1 | 153 hp (114 kW) @ 6000 RPM | 139 lb⋅ft (188 N⋅m) @ 4500 RPM | 6800 RPM | |||
2006–2011 Honda Civic (JDM) | 9.8:1 | 153 hp (114 kW) @ 6000 RPM | 139 lb⋅ft (188 N⋅m) @ 4500 RPM | 6800 RPM | ||||
2006–2015 Honda Accord (EDM) | 9.8:1 | 153 hp (114 kW) @ 6000 RPM | 139 lb⋅ft (188 N⋅m) @ 4500 RPM | 6800 RPM | ||||
2006–2010 Honda Civic 2.0 S / S-L (PHDM) | 9.8:1 | 153 hp (114 kW) @ 6000 RPM | 139 lb⋅ft (188 N⋅m) @ 4500 RPM | 6800 RPM | ||||
K20Z3 | 2006–2011 Honda Civic Si | 11.0:1 | 197 hp (147 kW) @ 7800 RPM[lower-alpha 2] | 139 lb⋅ft (188 N⋅m) @ 6200 RPM[lower-alpha 2] | 8000 RPM | 8300 RPM | 5800 RPM | RBC[lower-alpha 3] |
2007–2010 Acura CSX Type S | 11.0:1 | 197 hp (147 kW) @ 7800 RPM[lower-alpha 2] | 139 lb⋅ft (188 N⋅m) @ 6200 RPM[lower-alpha 2] | 8000 RPM | 8300 RPM | 5800 RPM | ||
K20Z4 | 2007–2010 Honda Civic Type R (EDM) | 11.0:1 | 201 hp (150 kW) @ 7800 RPM | 142 lb⋅ft (193 N⋅m) @ 6800 RPM | 8000 RPM | 8200 RPM | 5400 RPM | RSP |
K20Z5 | 2007–2010 Honda Civic Si (BDM) | 11.0:1 | 192 hp (143 kW) @ 7800 RPM | 136 lb⋅ft (184 N⋅m) @ 6800 RPM | 8000 RPM | 8200 RPM | 5400 RPM |
- SAE BHP measurement changes from 2005 to 2006. Thus, reducing the 2006 Acura RSX Type S rating from 210 hp (160 kW) to 201 hp (150 kW) on paper.
- SAE net Rev 8/04
- The RBC is not a variable-length intake.
- Additional notes
K20Z3 (as fitted to Ariel's Atom 3.5)
- It has an aluminum block with an aluminum head. The K20Z3 has Honda's traditional performance VTEC (as found on previous generation of engines) on the intake and the exhaust cams. Variable cam timing technology is included on the intake but not the exhaust cams. The added timing control corresponds to the added "i" in i-VTEC.
K23
K23A1
Honda K23A1 | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2007–2012 |
Layout | |
Configuration | L4 |
Displacement | 2.3 L; 140.4 cu in (2,300 cc) |
Cylinder bore | 86 mm (3.386 in) |
Piston stroke | 99 mm (3.898 in) |
Valvetrain | DOHC |
Compression ratio | 8.8:1 |
Combustion | |
Turbocharger | 1 |
Fuel system | Fuel injection |
Management | ECU |
Fuel type | Gasoline |
Output | |
Power output | 240 hp (180 kW) @ 6000 RPM |
Torque output | 260 lb⋅ft (350 N⋅m) @ 4500 RPM |
- Additional notes
- This version of the K engine uses a Mitsubishi TD04HL-15T turbocharger with a dual path turbine housing, optimizing low end response while allowing better high end flow. Maximum boost pressure is 13.5psi. The engine includes i-VTEC and VTC technologies and comes mated to a version of Honda's 5-speed automatic with SH-AWD (note: SH-AWD was standard from 2007-2009 and optional from 2010-2012).
- Applications
Application | Redline | Rev limiter | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|
2007–2012 Acura RDX | 6800 RPM | 6900 RPM | 2500 RPM |
K24
K24A
Honda K24A | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2001–2012 |
Layout | |
Configuration | L4 |
Displacement | 2.4 L; 143.6 cu in (2,354 cc) |
Cylinder bore | 87 mm (3.425 in) |
Piston stroke | 99 mm (3.898 in) |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Fuel system | Fuel injection |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
- Applications
Engine | Application | Compression | Power | Torque | Redline | Rev limiter | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|---|---|---|---|
K24A1 | 2002–2006 Honda CR-V | 9.6:1 | 160 hp (119 kW) @ 6000 rpm | 162 lb⋅ft (220 N⋅m) @ 3600 rpm | 6500 rpm | 7000 rpm | RAA | |
K24A2 | 2002–2008 Honda Accord Type-S (JDM) | 10.5:1 | 197 hp; 147 kW @ 6800 rpm | 171 lb⋅ft (232 N⋅m) @ 4500 rpm | 7100 rpm[lower-alpha 1] | 7200 rpm | 6000 rpm | |
2003–2008 Honda Odyssey Absolute | 10.5:1 | 197 hp; 147 kW @ 6800 rpm | 171 lb⋅ft (232 N⋅m) @ 4500 rpm | 7100 rpm[lower-alpha 1] | 7200 rpm | 6000 rpm | ||
2004–2005 Acura TSX | 10.5:1 | 197 hp; 147 kW @ 6800 rpm | 166 lb⋅ft (225 N⋅m) @ 4500 rpm | 7100 rpm | 7200 rpm | 6000 rpm | RBB | |
2006–2008 Acura TSX[5] | 10.5:1 | 205 hp (153 kW) @ 7000 rpm | 164 lb⋅ft (222 N⋅m) @ 4500 rpm | 7100 rpm | 7200 rpm | 6000 rpm | RBB | |
K24A3 | 2003–2007 Honda Accord (JDM/EDM) | 10.5:1 | 200 PS (150 kW; 200 hp) @ 6800 rpm | 171 lb⋅ft (232 N⋅m) @ 4500 rpm | 7200 rpm | 7300 rpm | 6000 rpm | RBB |
2003–2007 Honda Accord Euro (AUDM/NZDM) | 10.5:1 | 200 PS (150 kW; 200 hp) @ 6800 rpm | 171 lb⋅ft (232 N⋅m) @ 4500 rpm | 7200 rpm | 7300 rpm | 6000 rpm | RBB | |
K24A4 | 2003–2005 Honda Accord (USDM) | 9.7:1 | 160 hp (119 kW) @ 5500 rpm | 161 lb⋅ft (218 N⋅m) @ 4500 rpm | 6800 rpm | 2400 rpm | RAA | |
2003–2008 Honda Odyssey | 9.7:1 | 160 hp (119 kW) @ 5500 rpm | 161 lb⋅ft (218 N⋅m) @ 4500 rpm | 6800 rpm | RAA | |||
2003–2006 Honda Element | 9.7:1 | 160 hp (119 kW) @ 5500 rpm | 161 lb⋅ft (218 N⋅m) @ 4500 rpm | 6800 rpm | RAA | |||
K24A8 | 2006–2007 Honda Accord (USDM) | 9.7:1 | 166 hp (124 kW) @ 5800 rpm | 160 lb⋅ft (217 N⋅m) @ 4000 rpm | 6500 rpm | 2400/4500 rpm[lower-alpha 2] | RAA | |
2007–2011 Honda Element | 9.7:1 | 166 hp (124 kW) @ 5800 rpm | 161 lb⋅ft (218 N⋅m) @ 4000 rpm | 6800 rpm | 2400/4500 rpm[lower-alpha 2] | RAA | ||
2008–2014 Honda Odyssey (JDM) | 10.5:1 | 180 PS (132 kW; 178 hp) | 161 lb⋅ft (218 N⋅m) |
-
Automatic: 7100 rpm
Sequential Sportshift: 7300 rpm
Manual: 7600 rpm - 2400 rpm While in fuel efficiency mode. 4500 rpm in performance mode.
- Additional notes
K24A2 and K24A3 (2006-2008 Acura TSX)[5]
- Increased intake flow:
- Intake valve + 1 mm oversize (Intake valve head measures 36mm, but valve seat still measures 35mm)
- Intake cam High lift lobe with 0.9 mm more lift and 12 degrees more duration
- Throttle body increased from 60–64 mm
- Radius on some intake pipes increased from 70–80 mm
- Increased exhaust flow
- Exhaust Head pipe increased from 60–65 mm
- Higher flow catalytic converter
- Main (single) exhaust pipe increased from 54–57 mm
- Rear (twin) pipes increased in diameter from 42.5 to 45 mm
- Block improvements:
- Additional air passages in crankcase for reduced pumping losses
- Others
- Stronger connecting rods
- New crankshaft with more counterbalance weight
- Revised pistons with more valve-piston clearance
- Under-piston oil squirters
- Increased intake flow:
K24W (Earth Dreams)
Honda K24V & K24W | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2013–present |
Layout | |
Configuration | L4 |
Displacement | 2.4 L; 143.8 cu in (2,356 cc) |
Cylinder bore | 87 mm (3.425 in) |
Piston stroke | 99.1 mm (3.902 in) |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Fuel system | Direct fuel injection (K24W)[6] Fuel injection (other) |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
Dimensions | |
Length | 30cm |
Direct Injection, iVTEC (intake camshaft & valvetrain)
[Please add accurate technical specifications] This section previously inaccurately suggested that the 2016-2017+ Acura ILX engine K24V7 and the K24W7 of the Acura TLX are the same engine, and although they may be very closely related, even sharing identical internal architecture and components, they actually are different engines with different Honda internal engine code designations. This may be strictly due to different transmissions, as the 2016-2017+ ILX uses its own specific 8-speed dual-clutch auto with a torque converter, as well as different exhaust, intake, and accessory packaging due to their differing chassis [the ILX sharing its basic architecture with the 2013 - 2016 generation Civic].
- Applications
Engine | Application | Compression | Power | Torque | Redline | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|---|---|---|
K24W | 2013–2017 Honda Accord (USDM) | 11.1:1 | 185 hp (138 kW) @ 6400 RPM | 181 lb⋅ft (245 N⋅m) @ 3900 RPM | 6800 RPM | 4800 RPM | |
2015–2019 Honda CR-V (USDM) | 11.1:1 | 185 hp (138 kW) @ 6400 RPM | 181 lb⋅ft (245 N⋅m) @ 3900 RPM | 6800 RPM | 4800 RPM | ||
2013–present Honda Odyssey (JDM) | 11.1:1 | 185 hp (138 kW) @ 6400 RPM | 173 lb⋅ft (235 N⋅m) @ 4000 RPM | 6800 RPM | 4800 RPM | ||
K24W4 | 2013–2018 Honda Accord (Thailand/Malaysia) | 10.1:1 | 174 hp (130 kW) @ 6200 RPM | 166 lb⋅ft (225 N⋅m) @ 4000 RPM | 6500 RPM | ||
2015–2016 Honda CR-V (Thailand)[7] | 10.1:1 | 174 hp (130 kW) @ 6200 RPM | 166 lb⋅ft (225 N⋅m) @ 4000 RPM | 6500 RPM | |||
2013–present Honda Odyssey (International model excl. Japan) | 10.1:1 | 174 hp (130 kW) @ 6200 RPM | 166 lb⋅ft (225 N⋅m) @ 4000 RPM | 6500 RPM | |||
K24V5 | 2017–present Honda CR-V (Thailand)[8][9] | 10.1:1 | 170 hp (130 kW) @ 6200 RPM | 165 lb⋅ft (224 N⋅m) @ 4000 RPM | 6500 RPM | ||
K24V7 | 2016–present Acura ILX[10][11] | 11.6:1 | 201 hp (150 kW) @ 6800 RPM | 180 lb⋅ft (240 N⋅m) @ 3800 RPM | 7000 RPM | 5000 RPM +/-100 RPM | |
K24W7 | 2015–2020 Acura TLX | 11.6:1 | 206 hp (154 kW) @ 6800 RPM | 182 lb⋅ft (247 N⋅m) @ 3900 RPM | 7000 RPM | 5000 RPM +/-100 RPM | |
K24W7 | 2015–2018 Honda Spirior Si | 11.6:1 | 202 hp (151 kW) @ 6800 RPM | 182 lb⋅ft (247 N⋅m) @ 3900 RPM | 7000 RPM | 5000 RPM +/-100 RPM |
K24Y
Honda K24Y | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2012-2016 |
Layout | |
Configuration | L4 |
Displacement | 2.4 L; 143.6 cu in (2,354 cc) |
Cylinder bore | 87 mm (3.425 in) |
Piston stroke | 99 mm (3.898 in) |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Fuel system | Fuel injection |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
- Applications
Engine | Application | Compression | Power | Torque | Redline | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|---|---|---|
K24Y1 | 2012–2014 Honda CR-V (Thailand) | 10.5:1 | 170 hp (127 kW) @ 6000 RPM | 162 lbf⋅ft (220 N⋅m) @ 4300 RPM | 6500 RPM | ||
K24Y2 | 2012–2015 Honda Crosstour | 10.0:1 | 192 hp (143 kW) @ 7000 RPM | 162 lb⋅ft (220 N⋅m) @ 4400 RPM | 7100 RPM |
K24Z
Honda K24Z | |
---|---|
Overview | |
Manufacturer | Honda Motor Co., Ltd. |
Production | 2007–2015 |
Layout | |
Configuration | L4 |
Displacement | 2.4 L; 143.6 cu in (2,354 cc) |
Cylinder bore | 87 mm (3.425 in) |
Piston stroke | 99 mm (3.898 in) |
Valvetrain | DOHC |
Compression ratio | See left for specific application. |
Combustion | |
Fuel system | Fuel injection |
Management | ECU |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | See left for specific application. |
Torque output | See left for specific application. |
- Applications
Engine | Application | Compression | Power | Torque | Redline | Rev limiter | i-VTEC engagement |
Intake Manifold |
---|---|---|---|---|---|---|---|---|
K24Z1 | 2007–2009 Honda CR-V (RE3, RE4) | 9.7:1 | 166 hp (124 kW) @ 5800 RPM | 161 lb⋅ft (218 N⋅m) @ 4200 RPM | 6500 RPM | |||
K24Z2 | 2008–2012 Honda Accord LX/LX-P (USDM) | 10.5:1 | 177 hp (132 kW) @ 6500 RPM | 161 lb⋅ft (218 N⋅m) @ 4300 RPM | 6800 RPM | |||
2016–present Proton Perdana | 10.5:1 | 177 hp (132 kW) @ 6500 RPM | 161 lb⋅ft (218 N⋅m) @ 4300 RPM | 6800 RPM | ||||
K24Z3 | 2008–2012 Honda Accord LX-S/EX/EX-L (USDM) | 10.5:1[12] | 190 hp (142 kW) @ 7000 RPM | 162 lb⋅ft (220 N⋅m) @ 4400 RPM | 7100 RPM | 5100 RPM | ||
2009–2014 Acura TSX[13] | 11.0:1 | 201 hp (150 kW) @ 7000 RPM | 172 lb⋅ft (233 N⋅m) @ 4300 RPM | 7100 RPM | 5100 RPM | |||
2008–2015 Honda Accord (CP2, CS1) | 11.0:1 | 201 hp (150 kW) @ 7000 RPM | 172 lb⋅ft (233 N⋅m) @ 4300 RPM | 7100 RPM | 5100 RPM | |||
K24Z4 | 2008–2012 Honda CR-V (RE7) | 9.7:1 | 161 hp (120 kW) @ 5800 RPM | 161 lb⋅ft (218 N⋅m) @ 4200 RPM | 6500 RPM | |||
K24Z5 | 2010–2015 Honda Spirior | 10.5:1 | 184 hp (137 kW) @ 6500 RPM | 164 lb⋅ft (222 N⋅m) @ 4300 RPM | 6500 RPM | |||
K24Z6 | 2010–2011 Honda CR-V (USDM) | 10.5:1 | 180 hp (134 kW) @ 6800 RPM | 161 lb⋅ft (218 N⋅m) @ 4400 RPM | 7100 RPM | 7200 RPM | ||
2012–2014 Honda CR-V (USDM) | 10.0:1 | 185 hp (138 kW) @ 7000 RPM | 163 lb⋅ft (221 N⋅m) @ 4400 RPM | 7000 RPM | ||||
K24Z7 | 2012–2013 Honda Civic Si | 11.0:1 | 201 hp (150 kW) @ 7000 RPM | 170 lb⋅ft (230 N⋅m) @ 4400 RPM | 7000 RPM | 7200 RPM | 5200 RPM | |
2014–2015 Honda Civic Si | 11.0:1 | 205 hp (153 kW) @ 7000 RPM | 174 lb⋅ft (236 N⋅m) @ 4400 RPM | 7000 RPM | 7500 RPM | 5000 RPM | ||
2013–2015 Acura ILX | 11.0:1 | 201 hp (150 kW) @ 7000 RPM | 170 lb⋅ft (230 N⋅m) @ 4400 RPM | 7100 RPM | 7200 RPM |
References
- "Honda K-Series Engines". JDM Spec Engines. Archived from the original on 13 March 2014. Retrieved 20 May 2014.
- "Technical Information RSX VTEC and VTC". Hondata. Archived from the original on 12 May 2018. Retrieved 21 April 2018.
- "Honda K20A 2.0l DOHC i-VTEC SPEC R Engine for the new FD2 CIVIC TYPE R". Asia.vtec.net. Archived from the original on 6 February 2017. Retrieved 15 October 2018.
- "Vehicle Specifications - 2018 Honda Civic Sedan - Honda Owners Site". Owners.honda.com. Archived from the original on 5 November 2018. Retrieved 15 October 2018.
- "2008 Acura TSX - Powertrain". acuranews.com. Retrieved 15 October 2018.
- "Archived copy" (PDF). S2CID 39308378. Archived (PDF) from the original on 2019-03-07. Retrieved 2020-08-22. Cite journal requires
|journal=
(help)CS1 maint: archived copy as title (link) - "ทดลองขับ Honda CR-V MY 2015 2.4 CVT 4WD (Minorchange) : เปลี่ยนเครื่อง และเกียร์ใหม่ รับมือ X-Trail กับ CX-5". Headlightmag (in Thai). Archived from the original on 2020-01-28. Retrieved 2020-08-22.
- "ECO sticker - Honda CR-V 2.4 EL 4WD". ECO sticker - The Office of Industrial Economics, Ministry of Industry Thailand (in Thai). Archived from the original on 2020-09-27. Retrieved 2020-01-18.
- "Honda CR-V Catalogue" (PDF). Honda Thailand (in Thai). Retrieved 2020-01-18.
- "Acura Set to Launch More Powerful, Technologically Advanced and Luxuriously Equipped 2016 Acura ILX Sport Sedan" (Press release). Los Angeles, CA: Acura. 20 November 2014. Archived from the original on 27 September 2020. Retrieved 23 May 2016.
- "2017 ILX Specifications & Features". Acura. 12 April 2016. Archived from the original on 27 September 2020. Retrieved 23 May 2016.
- "2012 Honda Accord Specifications and Features". Honda Automobiles Newsroom. 2011-08-17. Retrieved 2020-10-03.
- "2009 Acura TSX - Powertrain" (Press release). Torrance, CA: Acura. 20 April 2008. Retrieved 1 September 2015.
External links
- Honda engine pages: i-VTEC DOHC, 2.0L DOHC i-VTEC
- K Series VTEC Breakdown: K Series VTEC Breakdown