Goodwood railway station

Goodwood railway station is the junction station for the Belair, Seaford and Flinders lines.[1][2] The Belair line diverges south-east towards Millswood, while the Seaford and Flinders lines diverge south-west towards Clarence Park. The Glenelg tram line crosses over the railway lines at the south end of Goodwood station. The station services the Adelaide inner-southern suburb of Goodwood, and is 5.0 km from Adelaide station.

For the disused station in Queensland, see Goodwood railway station, Queensland.

Goodwood
Goodwood station with the Goodwood Overpass
LocationRailway Terrace North
Goodwood SA 5034
Coordinates34°57′06″S 138°35′06″E
Owned byDPTI
Operated byAdelaide Metro
Line(s)Belair Line, Seaford Line, Flinders Line
Distance5 km from Adelaide
Platforms4 (2 island platforms) 1 platform disused
Tracks4
Construction
Structure typeGround
ParkingYes
Bicycle facilitiesNo
Disabled accessNo
History
Opened5 March 1883
Rebuilt1929
Services
Preceding station   Adelaide Metro   Following station
toward Adelaide
Belair line
toward Belair
Seaford line
toward Seaford
Flinders line
toward Flinders

History

Goodwood railway station opened on 5 March 1883 with the opening of the Adelaide to Aldgate section of the Adelaide-Melbourne line. It became a junction station in 1915 when the Willunga railway line was constructed. Prior to 1929, what is now the Glenelg tram line was a railway line that crossed the main south line on a level junction. As part of its conversion from a broad gauge railway to a standard gauge tramway, a bridge was built to carry the trams safely over the railway lines.[3]

Pre-1955, the Belair trains typically used Platform 1 for outbound services, and Platform 2 for inbound services, whilst the Willunga trains used Platform 3 for outbound services, and Platform 4 for inbound services. The yard immediately south allowed trains to transfer from any platform to any line. The most common use of this feature was when Inter/Intrastate freight and passenger trains would use the Willunga tracks to Goodwood from Keswick Rail Yards, then change to the Belair tracks through Goodwood Yard.

Prior to the One Nation gauge standardisation project in 1995, all four tracks at Goodwood were broad gauge, and the Belair line was dual broad gauge tracks. In 1995, the western track of the Belair line was converted to standard gauge, and the Belair line is now only a single track of each gauge.

Goodwood station was the main railway station servicing the Royal Adelaide Showgrounds. However between 2005 and 2013 during the Royal Adelaide Show, TransAdelaide closed Platform 1 at Goodwood, and exclusively devoted the easternmost of the four tracks between Adelaide and Goodwood to a non-stop shuttle service between Platform 1 at Adelaide station and a temporary platform at the Showgrounds named Showground Central.[4] During this period, Belair line movements were merged with (the previously) Noarlunga Line movements through Platforms 2 and 3 at Goodwood. In 2014, Showground Central was replaced by the permanent Adelaide Showground station with existing services making additional stops.

Train on the Belair line passing the underpass

Renewal

In 2013-14 tracks through the station were electrified along with the rest of the Seaford line. Platform 3 which is serviced by Belair trains is only electrified up to the South end of the platform which is where the overhead wires are pulled across to a pole. There is a sign there that states 'EMU do not proceed past this point.' Platform 3 is serviced by 3000/3100 class DEMU railcars.

The Goodwood Junction Upgrade separated the existing freight and Belair passenger lines from the Seaford line by a grade separation. A rail underpass near Victoria Street lowered the Seaford line below ground level, with the freight and Belair lines above. It was completed in 2014 along with the electrification of the Seaford line.[5][6] A project to construct a footbridge adjacent to the Goodwood Overpass was announced in May 2016, and would provide a new access point to the station;[7] though as of 2018 work has not commenced.

Services by platform

Goodwood station has three platforms serving the three broad gauge tracks of the three southern metropolitan lines. The fourth and westernmost track, which is part of the standard gauge line to Melbourne, bypasses the no-longer-used fourth platform. From the north of the stations, there are four tracks between Greenhill Road and the station. The westernmost track is standard gauge, and the other three are broad gauge. After the Goodwood underpass construction, Belair trains used Platform 3 for outbound and inbound service, while Seaford and Flinders trains used Platform 1 for outbound service, and Platform 2 for inbound services.

The Goodwood Overpass
Platform Destination/s Notes
1 Seaford/Flinders
2 Adelaide
3 Adelaide/Belair

References
  1. Belair timetable Archived 23 January 2015 at the Wayback Machine Adelaide Metro 12 October 2014
  2. Seaford & Tonsley timetable Adelaide Metro 20 July 2014
  3. "TRAMWAY BRIDGE At GOODWOOD". The Register News-Pictorial. XCIV (27, 379). South Australia. 16 May 1929. p. 31. Retrieved 2 June 2016 – via National Library of Australia.
  4. Getting There Adelaide Show
  5. Goodwood Junction upgrade Archived 13 August 2018 at the Wayback Machine Department of Planning, Transport & Infrastructure
  6. Goodwood Junction Rail Grade Separation Archived 22 January 2015 at the Wayback Machine York Civil
  7. Jervis-Bardy, Dan (16 May 2016). "$10m bridge to take cyclists safely over top of Goodwood train station". Eastern Courier Messenger.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.