Dudek Rex

The Dudek Rex is a Polish single-place, paraglider that was designed and produced by Dudek Paragliding of Bydgoszcz. It is now out of production.[1]

Rex
Role Paraglider
National origin Poland
Manufacturer Dudek Paragliding
Status Production completed
Produced late 1990s - mid-2000s

Design and development

The Rex was designed as an beginner glider for pilots undergoing flight training and also for novice pilots. It is made from Skytex material with Technora lines. The models are each named for their approximate wing area in square metres.[1]

Operational history

Reviewer Noel Bertrand described the Rex in a 2003 review as "technically very elaborate".[1]

Variants
Rex 25
Small-sized model for lightweight pilots. Its 10.65 m (34.9 ft) span wing has a wing area of 25.67 m2 (276.3 sq ft), 33 cells and the aspect ratio is 4.41:1. The pilot weight range is 45 to 75 kg (99 to 165 lb).[1]
Rex 27
Mid-sized model for medium weight pilots. Its 11.02 m (36.2 ft) span wing has a wing area of 27.51 m2 (296.1 sq ft), 33 cells and the aspect ratio is 4.41:1. The pilot weight range is 70 to 100 kg (154 to 220 lb).[1]
Rex 29
Large-sized model for heavier pilots. Its 11.41 m (37.4 ft) span wing has a wing area of 29.47 m2 (317.2 sq ft), 33 cells and the aspect ratio is 4.41:1. The pilot weight range is 95 to 125 kg (209 to 276 lb).[1]

Specifications (Rex-27)

Data from Bertrand[1]

General characteristics

  • Crew: one
  • Wingspan: 11.02 m (36 ft 2 in)
  • Wing area: 27.51 m2 (296.1 sq ft)
  • Aspect ratio: 4.41:1

Performance

  • Maximum speed: 44 km/h (27 mph, 24 kn)
  • Rate of sink: 1.1 m/s (220 ft/min)

References
  1. Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 14. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.