Dallara T08
The Dallara T08 was a racing car developed by Italian manufacturer Dallara for use in the Formula Renault 3.5 series, and was in use from 2008 to 2011. The T08 is the second generation of car used by the World Series by Renault/WS Formula V8 3.5, and was introduced at Circuit de Nevers Magny-Cours. The carbon tub of the car would later be carried over to its successor, the Dallara T12.[2]
 Giedo van der Garde, 2008 Silverstone WSR Round, in the original 2008 aerodynamic configuration. | |
| Category | World Series Formula V8 3.5 |
|---|---|
| Constructor | Dallara |
| Designer(s) | Luca Pignacca Andrea Toso |
| Predecessor | Dallara T05 |
| Successor | Dallara T12 |
| Technical specifications[1] | |
| Chassis | Carbon-fibre monocoque with honeycomb structure |
| Suspension (front) | Pushrods, single vertically-mounted adjustable four-tube shock absorber |
| Suspension (rear) | Pushrods, double adjustable four-tube shock absorber |
| Width | 1,930 mm (76 in) |
| Height | 1,050 mm (41 in) |
| Axle track | Front: 1,630 mm (64 in) Rear: 1,529 mm (60 in) |
| Wheelbase | 3,125 mm (123 in) |
| Engine | Renault VQ35 V6 prepared by Solution F 3,396 cc (207 cu in) V6 90° cylinder angle normally-aspirated mid-mounted |
| Transmission | 6-speed semi-automatic gearbox |
| Power | 480 hp (358 kW) |
| Weight | 628 kg (1,385 lb) (excluding driver) 703 kg (1,550 lb) (including driver) |
| Fuel | Elf |
| Lubricants | Elf |
| Tyres | Michelin O.Z. racing wheels |
| Competition history | |
| Notable entrants | All World Series Formula V8 3.5 teams |
| Notable drivers | All World Series Formula V8 3.5 drivers |
| Debut | 2008 Monza World Series by Renault round |
| Drivers' Championships | 4 |
Design
The new car featured flex-fuel technology and could be powered by either premium unleaded petrol or E85 bioethanol, which was a first for this level of motorsport in Europe. The Renault V6 engine, prepared by French company Solution F, also saw its power increased from 425 horsepower (317 kW) to 500 horsepower (370 kW).
The car also featured a new carbon bodyshell, as well as a new shaped front wing, hollowed sidepods and multiple side deflectors designed to improve aerodynamic performance. However, several areas of the car, including the gearbox, rear suspension and carbon brakes, remained the same in order to keep costs under control.[3]
The new car made its first public appearance on 21 September at the Magny-Cours round of the 2007 season,[4] with development driver Andy Soucek demonstrating the car at the final round of the series in Barcelona.[5]
Subsequent Development and Changes
2009 FR 3.5 Series
.JPG.webp)
The car underwent a number of changes to its aerodynamic configuration, in line with the 2009 Formula One technical changes. This saw the removal of the cars bargeboards, sidepod chimneys, and the flip-ups ahead of the rear wheel.[6]
2010 FR 3.5 Series
Following the 2009 season, a few changes were made to the car, under the series Technical Regulations for the 2010 Formula Renault 3.5 Series. The engines were re–tuned from 8,200 RPM to 8,500 RPM, with Boost control being banned.[7]
References
- "WSR 3.5 Technical Specifications". World Series by Renault. Archived from the original on 2011-09-03. Retrieved 2014-04-25.
- Mills, Peter (2011-05-27). "FV8 3.5 news: FR3.5 announces 2012 car plans". AUTOSPORT.com. Retrieved 2019-11-12.
- "New Formula Renault 3.5 in 2008". renault-sport.com. 2007-07-12. Archived from the original on 28 September 2007. Retrieved 2007-11-08.
- "PREVIEW New WSR car revealed". italiaracing.net. 2007-09-21. Archived from the original on 2007-12-13. Retrieved 2007-10-03.
- '08 World Series car hits track. Autosport Magazine, Vol. 190, No. 5, pp. 13, Haymarket Publications. 1 November 2007.
- "Changes unveiled for 2009". renault-sport.com. 2008-09-28. Archived from the original on 17 November 2008. Retrieved 2008-10-07.
- "2010 is already here!". renault-sport.com. Renault Sport. 2009-10-25. Retrieved 2009-11-10.
External links
|
