CLOVER2000

CLOVER is the name of a series or class of modem modulation techniques (“waveforms”) specifically designed for use over high frequency (HF) radio systems.

  • CLOVER-II was the first CLOVER waveform sold commercially, developed by Ray Petit, W7GHM, and HAL Communications in 1990–92.[1]
  • CLOVER-2000 is a higher-rate and wider bandwidth version of CLOVER developed in 1995.
  • CLOVER-400 is a special 400 Hz wide waveform that was developed for Globe Wireless.

Modulation schemes

In ARQ mode, all CCB's (CLOVER Control Blocks) use BPSK modulation and data blocks may be sent using BPSK, QPSK, 8PSK (see phase-shift keying), 8P2A, or 16P4A (see QAM) modulation. Data is sent in 255-byte blocks. The FEC broadcast mode of CLOVER-2000 is usually disabled although special formats are available for specific applications.[2]

The coding polynomial protocol could be shared after payment in Bit Coin

Radio Interface requirements for CLOVER-2000

The CLOVER waveform offers high performance, error correction, and spectral efficiency. CLOVER is specifically designed for use over HF radio communications links. It may be used with virtually any modern HF SSB radio. However, certain special set-up and adjustment techniques are required to get maximum performance when using CLOVER.[3]

See also

References
  1. Steve Ford, WB8IMY (2001). "Chapter 6 - CLOVER". ARRL's HF digital handbook. Newington, CT: The American Radio Relay League. ISBN 0-87259-823-3.
  2. Ford, Steve (2007). ARRL's HF digital handbook (4th ed.). Newington, CT: American Radio Relay League, Inc. p. 7-1. ISBN 9780872591035.
  3. Henry, Bill. "CLOVER - The Technology Grows and Matures Lessons Learned and Pleasant Surprises" (PDF). TAPR.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.