2-Ethyl-1-butanol

2-Ethyl-1-butanol (IUPAC name: 2-ethylbutan-1-ol) is an organic chemical compound. It can be used to facilitate the separation of ethanol from water, which form an azeotrope that otherwise limits the maximum ethanol concentration.[2]

2-Ethyl-1-butanol[1]
Names
Preferred IUPAC name
2-Ethylbutan-1-ol
Other names
2-Ethyl-1-butanol
Identifiers
3D model (JSmol)
1731254
ChemSpider
ECHA InfoCard 100.002.384
EC Number
  • 202-621-4
RTECS number
  • EL3850000
UNII
UN number 2275
Properties
C6H14O
Molar mass 102.177 g·mol−1
Appearance Colorless liquid
Density 830 mg mL−1
Melting point −114.40 °C; −173.92 °F; 158.75 K
Boiling point 145 to 151 °C; 293 to 304 °F; 418 to 424 K
10 g L−1
Vapor pressure 206 Pa
1.422
Thermochemistry
246.65 J K−1 mol−1
Hazards
GHS pictograms
GHS Signal word Warning
H302, H312
P280
Flash point 58 °C (136 °F; 331 K)
Lethal dose or concentration (LD, LC):
1.85 g kg−1 (oral, rat)
Related compounds
Related compounds
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Reactions

2-Ethyl-1-butanol is manufactured industrially by the aldol condensation of acetaldehyde and butyraldehyde, followed by hydrogenation.[3] It may also be prepared by the Guerbet reaction.

Properties and applications

The branching in 2-ethyl-1-butanol makes it harder to crystalize due to packing disruption, which results in a very low freezing point. Esters of 2-ethyl-1-butanol are similarly effected and it therefore finds application as a feedstock in the production of plasticizers and lubricants, where its presence helps reduce viscosity and lower freezing points.

See also

References

  1. Lide, David R. (1998), Handbook of Chemistry and Physics (87 ed.), Boca Raton, Florida: CRC Press, pp. 3–262, 8–106, 15–20, ISBN 978-0-8493-0594-8
  2. Roddy, James W. (1981). "Distribution of ethanol-water mixtures to organic liquids". Ind. Eng. Chem. Proc. Des. Dev. 20 (1): 104–108. doi:10.1021/i200012a016.
  3. McKetta, John J.; Cunningham, William Aaron (1994), Encyclopedia of Chemical Processing and Design, 47, Boca Raton, Florida: CRC Press, p. 117, ISBN 978-0-8247-2451-1, retrieved 2010-01-25
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.