Wyoming Highway 377

Wyoming Highway 377 (WYO 377) was a short 1.96-mile-long (3.2 km) Wyoming state road in central Sweetwater County that served the community of Point of Rocks and the Jim Bridger Power Plant. It was decommissioned in 2017.

Wyoming Highway 377
Point of Rocks Road
WYO 377 highlighted in red
Route information
Maintained by WYDOT
Length1.96 mi[1] (3.15 km)
Major junctions
West end I-80 / US 30 in Point of Rocks
East end9 Mile Road near Jim Bridger Power Plant
Location
CountiesSweetwater
Highway system

State highways in Wyoming

WYO 376 WYO 387
WYO 28 WYO 30

Route description

Wyoming Highway 377 began at exit 130 of Interstate 80/US 30 in Point of Rocks, a Census-designated place located east of Rock Springs. WYO 377 traveled eastward along the north side of Interstate 80/US Route 30, which it paralleled. At just under 2 miles, Highway 377 ended, though the roadway continued north, as 9 Mile Road, providing access to and from the Jim Bridger Power Station.[2][3]

History

Highway 377 was the former alignment of US 30 (Lincoln Highway) through this area and paralleled Interstate 80 which carries the present day routing of US 30.[3]

Major intersections

The entire route was in Sweetwater County. [4]

Location[4]mikmDestinationsNotes
Point of Rocks0.000.00 I-80 / US 30Exit 130 on I-80
1.963.159 Mile RoadContinuation beyond eastern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

  1. Wyoming Department of Transportation Reference Marker Book - November 2004 (PDF) (Map). WYDOT. Archived from the original (PDF) on July 17, 2011. Retrieved 2011-10-19.
  2. Google (28 December 2016). "Wyoming Highway 377" (Map). Google Maps. Google. Retrieved 28 December 2016.
  3. Wyoming @ AARoads.com - Wyoming Routes 300-399
  4. Geography Division (2016). "Wyoming Governmental Unit Reference Map". United States Census Bureau. Retrieved January 24, 2017.

KML is from Wikidata
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.