Warsztaty Szybowcowe SG-3

The Grzeszczyk SG-3 was a Polish single-seat, high performance sailplane first flown in 1933. Between 1934 and 1937 it was Poland's most successful competitor and record setter; about twenty-five were completed.

Grzeszczyk SG-3
Role High performance glider
National origin Poland
Manufacturer Warsztaty Szybowcowe
Designer Szezepan Grzeszczyk
First flight July or August 1933
Produced 3 years
Number built c.25 including SG-3 and SG-bis variants.
Developed from Grzeszczyk SG-21 Lwów and SG-28

Design and development

In 1931-2 Szczepan Grzesczyk designed the Grzeszczyk SG-21 Lwów and SG-28, two high performance sailplanes. Although only one of each was built, they performed well and led to the batch-built Grzeszczyk SG-3. Design was initiated in 1932 and Warsztaty Szybowcowe began construction of three developmental airframes in March 1933.[1] The first flew in July[1] or August.[2] Competing against the CW-5, the SG-3 established itself as the predominate Polish competition and record setting sailplane of its era.[1]

It was an all-wood, single-seat, cantilever high wing aircraft. Its two part wing, mounted on a streamlined central pylon, was built around a single spar with angled drag struts near the fuselage. Plywood covering ran around the leading edge to the spar, forming a torsion resisting D-box, as well as forward of the drag strut. Fabric covered the rest of the wing. SG-3 and SG-3bis wings were similarly built but plans and dihedrals differed. The SG-3 had a rectangular plan centre section filling about 15% of the span, with trapezoidal panels outboard. The SG-3bis had a gull wing of constant taper but with higher dihedral over the inner 30% of the, a 600 mm (23.6 in) greater span and a 6% increase in aspect ratio. They also differed in section: the SG-3 used Warsaw Aerodynamic Institute airfoils but the SG-38bis used the Göttingen 549. The ailerons also differed, with split surfaces on the SG-3 but longer, narrower single surfaces on the SG-3bis.[1][2][3]

The fuselage was a ply-skinned semi-monocoque, tapering rearwards most rapidly on the SG=3bis. The enclosed cockpit was ahead of the wing pylon and the wing leading edge and was continuously refined over the three annual production batches (SG-3/34, SG-3/35 and SG-36bis/36). The empennage was similar to that of the SG-21 Lwów and SG-28 with a very narrow, ply-covered fin integral with the fuselage and full, fabric-covered rudder. The rudder balance of early versions had gone by 1936. The chord of the split, tapered and mostly fabric-covered all moving tailplane of the SG-3 was increased in the SG-3bis.[1][3]

It landed n a sprung, central skid, faired-in on the SG-3bis, and had a small tailskid.[1][3]

Operational history

The SG-3 and SG-3bis set many Polish records. These included duration records in 1933 and 1934, the latter lasting 12 h 60 min. In 1936 it set the altitude record at 3,435 m (11,270 ft) and a distance record of 332.3 km (206.5 mi; 179.4 nmi). In 1937 it took the out-and-return distance record to 62.2 km (38.6 mi; 33.6 nmi) and in the following year Wanda Modlibowska set a women's distance record at 343 km (213 mi; 185 nmi).[1]

Twelve competed in the Fourth National Glider Contest, held at Ustianowa in July 1936. Six were SG-3bis and these dominated the competition. One flown Z. Źabski was the overall winner. A SG-3bis, flown by Tadeusz Gora, won the 1937 Contest.[1] By 1938 other designs, like the PWS-101 were starting to out-perform the SG-3bis, which also needed strengthening to meet new cloud-flying regulations. According to Cynk[1] this prevented their participation in the Sixth Contest, though a contract to make the required modifications was agreed. Simons[3] states that this work was judged too costly and most were scrapped, though Samoloty[2] reports that five took part.

Variants
SG-3
Initial version, first flown in 1933 and produced in batches in 1934 and 1935 with improvements to the cockpit enclosure increasing the field of view.
SG-3bis
Gull-winged, longer span version flown in 1936. It also had minor fuselage and empennage improvements. The optimum glide ratio was increased to 1:25.

Specifications (SG-3)

Data from Samoloty[2]

General characteristics

  • Crew: One
  • Length: 7.05 m (23 ft 2 in)
  • Wingspan: 17.0 m (55 ft 9 in)
  • Height: 1.85 m (6 ft 1 in)
  • Wing area: 16.5 m2 (178 sq ft)
  • Aspect ratio: 17.5[1]
  • Airfoil: Warsaw Aerodynamic Institute 192 and 336[1]
  • Empty weight: 149 kg (328 lb)
  • Gross weight: 226 kg (498 lb)

Performance

  • Maximum glide ratio: 22.7 best at 58 km/h (36 mph; 31 kn)
  • Rate of sink: 0.65 m/s (128 ft/min) minimum at 53 km/h (33 mph; 29 kn)
  • Minimum speed: 48 km/h (30 mph; 26 kn)

References
  1. Cynk, Jerzy (1971). Polish Aircraft 1893-1939. London: Putnam Publishing. p. 713-715. ISBN 0 370 00085 4.
  2. "SG-3, 1933 (SG-1)". Retrieved 8 December 2018.
  3. Simons, Martin (2006). Sailplanes 1920-1945 (2nd revised ed.). Königswinter: EQIP Werbung & Verlag GmbH. pp. 209–11. ISBN 3 9806773 4 6.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.