Underdrive pulleys
Underdrive means to slow the rate of rotation in a system. Underdrive is achieved by either making the crank/main (drive) pulley smaller or the accessory (driven) pulley larger than the original diameter pulleys.
Underdrive pulleys increase engine output by reducing the draw of the engine's accessories by slowing them down and reducing the HP they use. Horsepower gains from underdrive pulleys can vary by vehicle, engine, number of accessories and the amount of underdrive (Improvements of up to 5-15 HP at the wheels have been seen). Additional and significant performance improvements can be seen by reducing the weight of the pulley versus the original pulley. Gains can range from 3-6 HP per pound of weight reduced.
Poorly engineered underdrive pulleys can cause unwanted side effects; this is due to not spinning the alternator, power steering, and/or air conditioning fast enough. This leads to low alternator voltage, weak/no power steering assist, and weak/no air conditioning effectiveness, especially at idle/low RPM. The most commonly seen result is lighting may dim, or the stereo may cut out. Too much underdrive for a race car is not much of a concern due to the high RPMs they run at, but for daily driven vehicles it can lead to a dead battery if too much time is spent at idle or low RPM. Additionally, an underdrive pulley will not reduce the power consumed by the alternator, as the alternator's load is automatically adjusted by its control circuit to match the electrical load regardless of input speed.
Changing the original crankshaft pulley can also have negative effects if the replacement pulley is not manufactured properly. A crankshaft or accessory pulley not machined or balanced properly can cause severe damage leading to thousands of dollars in repairs.