Trifluoroacetic acid

Trifluoroacetic acid (TFA) is an organofluorine compound with the chemical formula CF3CO2H. It is a structural analogue of acetic acid with all three of the acetyl group's hydrogen atoms replaced by fluorine atoms and is a colorless liquid with a vinegar like odor.

Trifluoroacetic acid in a beaker
Trifluoroacetic acid
Names
Preferred IUPAC name
Trifluoroacetic acid
Other names
2,2,2-Trifluoroacetic acid
2,2,2-Trifluoroethanoic acid
Perfluoroacetic acid
Trifluoroethanoic acid
TFA
Identifiers
3D model (JSmol)
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.000.846
RTECS number
  • AJ9625000
UNII
Properties
C2HF3O2
Molar mass 114.023 g·mol−1
Appearance colorless liquid
Odor Pungent/Vinegar
Density 1.489 g/cm3, 20 °C
Melting point −15.4 °C (4.3 °F; 257.8 K)
Boiling point 72.4 °C (162.3 °F; 345.5 K)
miscible
Vapor pressure 0.0117 bar (1.17 kPa) at 20 °C[1]
Acidity (pKa) 0.52 [2]
-43.3·10−6 cm3/mol
Hazards
Main hazards Highly corrosive
Safety data sheet External MSDS
R-phrases (outdated) R20 R35 R52/53
S-phrases (outdated) S9 S26 S27 S28 S45 S61
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
1
3
1
Related compounds
Related perfluorinated acids
 Perfluorooctanoic acid
Perfluorononanoic acid
Related compounds
 Acetic acid
Trichloroacetic acid
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

TFA is a stronger acid than acetic acid, having an acid ionisation constant that is approximately 34,000 times higher,[3] as the highly electronegative fluorine atoms and consequent electron-withdrawing nature of the trifluoromethyl group weakens the oxygen-hydrogen bond (allowing for greater acidity) and stabilises the anionic conjugate base. TFA is widely used in organic chemistry for various purposes.

Synthesis

TFA is prepared industrially by the electrofluorination of acetyl chloride or acetic anhydride, followed by hydrolysis of the resulting trifluoroacetyl fluoride:[4]

CH
3COCl + 4 HF → CF
3COF + 3 H
2 + HCl
CF
3COF + H
2O → CF
3COOH + HF

Where desired, this compound may be dried by addition of trifluoroacetic anhydride.[5]

An older route to TFA proceeds via the oxidation of 1,1,1-trifluoro-2,3,3-trichloropropene with potassium permanganate. The trifluorotrichloropropene can be prepared by Swarts fluorination of hexachloropropene.

TFA occurs naturally in sea water, but only in small concentrations (≤200 ng/L).[6][7]

Uses

TFA is the precursor to many other fluorinated compounds such as trifluoroacetic anhydride, trifluoroperacetic acid, and 2,2,2-trifluoroethanol.[4] It is a reagent used in organic synthesis because of a combination of convenient properties: volatility, solubility in organic solvents, and its strength as an acid.[8] TFA is also less oxidizing than sulfuric acid but more readily available in anhydrous form than many other acids. One complication to its use is that TFA forms an azeotrope with water (b. p. 105 °C).

TFA is popularly used as a strong acid to remove t-butyl derived side-chain protecting groups in Fmoc peptide synthesis, and in other organic syntheses to remove the t-butoxycarbonyl protecting group.[9][10]

At a low concentration, TFA is used as an ion pairing agent in liquid chromatography (HPLC) of organic compounds, particularly peptides and small proteins. TFA is a versatile solvent for NMR spectroscopy (for materials stable in acid). It is also used as a calibrant in mass spectrometry.[11]

TFA is used to produce trifluoroacetate salts.[12]

Implication in anaesthesia

TFA is a metabolic breakdown product of the volatile anaesthetic agent halothane. It is thought to be responsible for halothane induced hepatitis.

Safety

Trifluoroacetic acid is a corrosive acid but it does not pose the hazards associated with hydrofluoric acid because the carbon-fluorine bond is not labile. Only if heated or treated with ultrasonic waves will it decompose into hydrofluoric acid. TFA is harmful when inhaled, causes severe skin burns and is toxic for aquatic organisms even at low concentrations.

TFA's reaction with bases and metals, especially light metals, is strongly exothermic. The reaction with lithium aluminium hydride (LAH) results in an explosion.[13]

Environment

TFA is not readily biodegradable and is toxic to aquatic life - although it does not bioaccumulate, prevention of release into waterways is of extreme importance when using TFA.[14]

See also

References
  1. "Trifluoroacetic acid". Welcome to the NIST WebBook. Retrieved 2020-03-01.
  2. W. M. Haynes.; David R. Lide; Thomas J. Bruno, eds. (2016–2017). CRC Handbook of Chemistry and Physics. pp. 954–963. ISBN 978-1-4987-5429-3.
  3. Note: Calculated from the ratio of the Ka values for TFA (pKa = 0.23) and acetic acid (pKa = 4.76)
  4. G. Siegemund; W. Schwertfeger; A. Feiring; B. Smart; F. Behr; H. Vogel; B. McKusick. "Fluorine Compounds, Organic". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a11_349.
  5. Wilfred L.F. Armarego & Christina Li Lin Chai. "Chapter 4 - Purification of Organic Chemicals". Purification of Laboratory Chemicals (6th ed.). doi:10.1016/B978-1-85617-567-8.50012-3.
  6. Frank, H.; Christoph, E. H.; Holm-Hansen, O.; Bullister, J. L. (January 2002). "Trifluoroacetate in ocean waters". Environ. Sci. Technol. 36 (1): 12–5. Bibcode:2002EnST...36...12P. doi:10.1021/es0221659. PMID 11811478.
  7. Scott, B. F.; MacDonald, R. W.; Kannan, K.; Fisk, A.; Witter, A.; Yamashita, N.; Durham, L.; Spencer, C.; Muir, D. C. G. (September 2005). "Trifluoroacetate profiles in the Arctic, Atlantic, and Pacific Oceans". Environ. Sci. Technol. 39 (17): 6555–60. Bibcode:2005EnST...39.6555S. doi:10.1021/es047975u. PMID 16190212.
  8. Eidman, K. F.; Nichols, P. J. (2004). "Trifluoroacetic Acid". In L. Paquette (ed.). Encyclopedia of Reagents for Organic Synthesis. New York: J. Wiley & Sons. doi:10.1002/047084289X. ISBN 9780471936237.
  9. Lundt, Behrend F.; Johansen, Nils L.; Vølund, Aage; Markussen, Jan (1978). "Removal of t-Butyl and t-Butoxycarbonyl Protecting Groups with Trifluoroacetic acid". International Journal of Peptide and Protein Research. 12 (5): 258–268. doi:10.1111/j.1399-3011.1978.tb02896.x. PMID 744685.
  10. Andrew B. Hughes (2011). "1. Protection Reactions". In Vommina V. Sureshbabu; Narasimhamurthy Narendra (eds.). Amino Acids, Peptides and Proteins in Organic Chemistry: Protection Reactions, Medicinal Chemistry, Combinatorial Synthesis. 4. pp. 1–97. doi:10.1002/9783527631827.ch1. ISBN 9783527631827.
  11. Stout, Steven J.; Dacunha, Adrian R. (1989). "Tuning and calibration in thermospray liquid chromatography/mass spectrometry using trifluoroacetic acid cluster ions". Analytical Chemistry. 61 (18): 2126. doi:10.1021/ac00193a027.
  12. O. Castano; A. Cavallaro; A. Palau; J. C. Gonzalez; M. Rossell; T. Puig; F. Sandiumenge; N. Mestres; S. Pinol; A. Pomar & X. Obradors (2003). "High quality YBa2Cu3O7 thin films grown by trifluoroacetates metal-organic deposition". Superconductor Science and Technology. 16 (1): 45–53. Bibcode:2003SuScT..16...45C. doi:10.1088/0953-2048/16/1/309.
  13. Safety data sheet for Trifluoroacetic acid (PDF) from EMD Millipore, revision date 10/27/2014.
  14. "GPS Safety Summary: Trifluoroacetic Acid" (PDF). Retrieved October 18, 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.