Table of explosive detonation velocities

This is a compilation of published detonation velocities for various high explosive compounds. Detonation velocity is the speed with which the detonation shock wave travels through the explosive. It is a key, directly measurable indicator of explosive performance, but depends on density which must always be specified, and may be too low if the test charge diameter is not large enough. Especially for little studied explosives there may be divergent published values due to charge diameter issues. In liquid explosives, like nitroglycerin, there may be two detonation velocities, one much higher than the other. The detonation velocity values presented here are typically for the highest practical density which maximizes achievable detonation velocity.[1]

The velocity of detonation is an important indicator for overall energy and power of detonation, and in particular for the brisance or shattering effect of an explosive which is due to the detonation pressure. The pressure can be calculated using Chapman-Jouguet theory from the velocity and density.

**Table of Explosive Detonation Velocities**
Explosive class	Explosive name	Abbreviation	Detonation velocity (m/s)	Test Density (g/cm³)
Aromatic	1,3,5-trinitrobenzene	TNB	7,450	1.60
Aromatic	1,3,5-Triazido-2,4,6-trinitrobenzene	TATNB	7,300	1.71
Aromatic	4,4’-Dinitro-3,3’-diazenofuroxan	DDF	10,000	2.02
Aromatic	Trinitrotoluene	TNT	6,900	1.60
Aromatic	Diazodinitrophenol	DDNP	7,100	1.63
Aromatic	Trinitroaniline	TNA	7,300	1.72
Aromatic	Tetryl		7,570	1.71
Aromatic	Picric acid	TNP	7,350	1.70
Aromatic	Ammonium picrate (Dunnite)		7,150	1.60
Aromatic	Methyl picrate		6,800	1.57
Aromatic	Ethyl picrate		6,500	1.55
Aromatic	Picryl chloride		7,200	1.74
Aromatic	Trinitrocresol		6,850	1.62
Aromatic	Lead styphnate		5,200	2.90
Aromatic	Triaminotrinitrobenzene	TATB	7,350	1.80
Aliphatic	1,1-diamino-2,2-dinitroethene	DADNE, FOX-7	8,335	1.76
Inorganic	Ammonium perchlorate	AP[2]	6,300	1.95
Aliphatic	Methyl nitrate	MN[3]	6,818	1.22
Aliphatic	Nitroglycol/ethylene glycol dinitrate	EGDN	7,500	1.49
Aliphatic	Nitroglycerine	NG	7,700	1.59
Aliphatic	Mannitol hexanitrate	MHN	8,260	1.73
Aliphatic	Pentaerythritol tetranitrate	PETN	8,400	1.76
Aliphatic	Erythritol tetranitrate	ETN	8,200	1.72
Aliphatic	Ethylenedinitramine	EDNA	7,570	1.65
Aliphatic	Nitroguanidine	NQ	8,200	1.70
Aliphatic	Cyclotrimethylenetrinitramine	RDX	8,650	1.76
Aliphatic	Cyclotetramethylene tetranitramine	HMX[4]	9,400	1.91
Aliphatic	Hexanitrodiphenylamine	HND	7,100	1.64
Aliphatic	Hexanitrohexaazaisowurtzitane	HNIW or CL-20[4]	9,500	2.04
Aliphatic	Tetranitroglycoluril	TNGU, Sorguyl, Sorguryl	9,150	1.95
Aliphatic	Hexanitrohexaazatricyclododecanedione	HHTDD, DTNGU, Naza/Namsorguyl/uryl HnHaza/amTcDglcDuryl	9,700	2.16
Aliphatic	5-Nitro-2,4-dihydro-3H-1,2,4-triazole-3-one [5]	NTO	8,564	1.93
Aliphatic	Octanitrocubane	ONC	10,100	2.00
Aliphatic	Nitrocellulose	NC	7,300	1.20
Aliphatic	Urea nitrate	UN	4,700	1.20
Aliphatic	Triacetone triperoxide	AP or TATP	5,300	1.18
Aliphatic	Methyl ethyl ketone peroxide	MEKP	5,200	1.17
Aliphatic	Hexamethylene triperoxide diamine	HMTD	4,500	0.88
Inorganic	Mercury fulminate		4,250	3.00
Inorganic	Potassium perchlorate aluminium mixture	KClO₄[6]	4,600	1.5
Inorganic	Lead azide		4,630	3.00
Inorganic	Nickel hydrazine nitrate	NHN	7,000	1.70
Inorganic	Silver azide		4,000	4.00
Inorganic	ANFO	AN/FO	4,200	1.30
Inorganic	Ammonium Nitrate	AN	2,700	1.73
Explosive class	Explosive name	Abbreviation	Detonation velocity (m/s)	Density (g/cm³)

References

Cooper, Paul W. (1996). Explosives Engineering, New York: Wiley-VCH. ISBN 0-471-18636-8
Shevchenko, A. A.; Dolgoborodov, A Yu; Brazhnikov, M. A.; Kirilenko, V. G. (2018). "Pseudoideal detonation of mechanoactivated mixtures of ammonium perchlorate with nanoaluminum". Journal of Physics: Conference Series. 946: 012055. doi:10.1088/1742-6596/946/1/012055.
Kozak, G.D. (1998). "Measurement and calculation of the ideal detonation velocity for liquid nitrocompounds". Combust Explos Shock Waves. 34 (5): 584. doi:10.1007/BF02672682.
Bolton, O.; Simke, L. R.; Pagoria, P. F.; Matzger, A. J. (2012). "High Power Explosive with Good Sensitivity: A 2:1 Cocrystal of CL-20:HMX". Crystal Growth & Design. 12 (9): 4311. doi:10.1021/cg3010882.
Viswanath DS, Ghosh TK, Boddu VM. (2018) 5-Nitro-2,4-Dihydro-3H-1,2,4-Triazole-3-One (NTO). Chapter 5 in Emerging Energetic Materials: Synthesis, Physicochemical, and Detonation Properties. Springer. doi:10.1007/978-94-024-1201-7_5
"Data" (PDF). www.dtic.mil. Retrieved 2019-12-15.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[Cooper1996-1] Cooper, Paul W. (1996). Explosives Engineering, New York: Wiley-VCH. ISBN 0-471-18636-8

[2] Shevchenko, A. A.; Dolgoborodov, A Yu; Brazhnikov, M. A.; Kirilenko, V. G. (2018). "Pseudoideal detonation of mechanoactivated mixtures of ammonium perchlorate with nanoaluminum". Journal of Physics: Conference Series. 946: 012055. doi:10.1088/1742-6596/946/1/012055.

[MN-3] Kozak, G.D. (1998). "Measurement and calculation of the ideal detonation velocity for liquid nitrocompounds". Combust Explos Shock Waves. 34 (5): 584. doi:10.1007/BF02672682.

[HMX-4] Bolton, O.; Simke, L. R.; Pagoria, P. F.; Matzger, A. J. (2012). "High Power Explosive with Good Sensitivity: A 2:1 Cocrystal of CL-20:HMX". Crystal Growth & Design. 12 (9): 4311. doi:10.1021/cg3010882.

[5] Viswanath DS, Ghosh TK, Boddu VM. (2018) 5-Nitro-2,4-Dihydro-3H-1,2,4-Triazole-3-One (NTO). Chapter 5 in Emerging Energetic Materials: Synthesis, Physicochemical, and Detonation Properties. Springer. doi:10.1007/978-94-024-1201-7_5

[6] "Data" (PDF). www.dtic.mil. Retrieved 2019-12-15.

Table of explosive detonation velocities

See also

References