Sexhow railway station

Sexhow railway station was a railway station built to serve the hamlet of Sexhow in North Yorkshire, England. The station was on the North Yorkshire and Cleveland's railway line between Picton and Stokesley, which opened in 1857. The line was extended progressively until it met the Whitby & Pickering Railway at Grosmont. Sexhow station was closed in 1954 to passengers and four years later to goods. The station was located 13 miles (21 km) south of Stockton, and 3.75 miles (6.04 km) west of Battersby railway station.[1]

Sexhow
LocationHambleton, North Yorkshire
England
Coordinates 54.4404°N 1.2468°W / 54.4404; -1.2468
Grid referenceNZ439050
Platforms2
Other information
StatusDisused
History
Original companyNorth Yorkshire and Cleveland Railway
Pre-groupingNorth Eastern Railway
Post-groupingLondon and North Eastern Railway
Key dates
April 1857Station opened
14 June 1954Closed to passengers
1 December 1958Closed completely

History

The station was opened in April 1857, when the line from Picton was opened up as far as Stokesley.[2] Mapping shows the station to have had three sidings in the goods yard, coal drops and a crane. The main station buildings were on the westbound (Picton direction) side of the station.[3] The station was south of the village that it served,[4] and was actually in the parish of Carlton in Cleveland, which has led to speculation that it was named Sexhow to avoid confusion with Redmarshall railway station, which was originally named Carlton.[5]

Bradshaw's timetable of 1877 shows five out and back workings between Stockton railway station and Whitby, with connections advertised in Middlesbrough.[6] The timetable of 1906 shows that the station had six services eastbound from Stockton railway station towards Stokesley, with five going all the way to Whitby and one terminating at Battersby railway station. Return services were just five a day with four coming from Whitby. The other service from Whitby reversed at Battersby and went to Stockton via Middlesbrough railway station.[7] By 1946, eight years before closure, the service was down to just three stopping services each way per day, with most of the services from Whitby to Stockton reversing at Battersby and going via Middlesbrough.[1]

The station closed to passengers in June 1954, and then closed completely in December 1958, having been used for goods traffic.[8]

References
  1. Bradshaw's Official Guide for Great Britain and Ireland 1946 at the Internet Archive
  2. Historic England. "North Yorkshire and Cleveland Railway (27368)". PastScape. Retrieved 13 February 2020.
  3. "Explore georeferenced maps - Map images - National Library of Scotland". maps.nls.uk. Retrieved 13 February 2020.
  4. "Disused Stations: Sexhow Station". www.disused-stations.org.uk. Retrieved 13 February 2020.
  5. Maynard, Peter J (2015). "3: A Brief Description of the Railway, Picton to Kildale". The North Yorkshire & Cleveland Railway. North Eastern Railway Association. p. 46. ISBN 978-1-873513-98-9.
  6. Bradshaw's General Railway and Steam Navigation Guide 1877 at the Internet Archive
  7. Bradshaw's General Railway and Steam Navigation Guide 1906 at the Internet Archive
  8. Quick, Michael (2019). "Railway Passenger Stations in England, Scotland and Wales; a Chronology" (PDF). rchs.org.uk. p. 361. Retrieved 13 February 2020.
Preceding station   Disused railways   Following station
Potto
Line and station closed		   NER
Picton-Battersby Line		   Stokesley
Line and station closed
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.