Rayner Pusher

The Rayner Pusher is a homebuilt version of the Curtiss Pusher.[1]

Pusher
Role Homebuilt aircraft
National origin United States
Designer Herb Rayner
Developed from Curtiss Model D

Design and development

The Rayner Pusher is a single-seat, tricycle landing gear-equipped biplane with a pusher engine layout. The fuselage is welded steel tubing. The wings are fabric covered on top surfaces only. It uses a fuel tank mounted above the top wing.[2][3]

Specifications

Data from EAA., Air Trails Summer 1971

General characteristics

  • Crew: 1
  • Length: 17 ft (5.2 m)
  • Wingspan: 21 ft (6.4 m)
  • Height: 7 ft (2.1 m)
  • Wing area: 140 sq ft (13 m2)
  • Empty weight: 600 lb (272 kg)
  • Gross weight: 950 lb (431 kg)
  • Fuel capacity: 10 gal
  • Powerplant: 1 × Continental A-65 horizontally-opposed piston aircraft engine, 65 hp (48 kW)
  • Propellers: 2-bladed

Performance

  • Maximum speed: 65 kn (75 mph, 121 km/h)
  • Cruise speed: 56 kn (65 mph, 105 km/h)
  • Stall speed: 30 kn (35 mph, 56 km/h)
  • Range: 160 nmi (180 mi, 290 km)
  • Service ceiling: 8,000 ft (2,400 m)
  • Rate of climb: 600 ft/min (3.0 m/s)

See also

Aircraft of comparable role, configuration, and era

References

  1. Air Trails. Winter 1971. Missing or empty |title= (help)
  2. Sport Aviation: 34. July 1966. Missing or empty |title= (help)
  3. Air Trails Sprot Aircraft: 70. Winter 1969. Missing or empty |title= (help)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.