Network-to-network interface

In telecommunications, a network-to-network interface (NNI) is an interface that specifies signaling and management functions between two networks. An NNI circuit can be used for interconnection of signalling (e.g., SS7), Internet Protocol (IP) (e.g., MPLS) or ATM networks.[1]

In networks based on MPLS or GMPLS, NNI is used for the interconnection of core Provider Routers (class 4 or higher). In the case of GMPLS, the type of interconnection can vary across Back-to-Back, EBGP or mixed NNI connection scenarios, depending on the type of VRF exchange used for interconnection. In case of Back-to-Back, VRF is necessary to create VLANs and subsequently sub-interfaces (VLAN headers and DLCI headers for Ethernet and frame relay network packets) on each interface used for the NNI circuit. In the case of eBGP NNI interconnection, IP routers are taught how to dynamically exchange VRF records without VLAN creation. NNI also can be used for interconnection of two VoIP nodes. In cases of mixed or full-mesh scenarios, other NNI types are possible.[2]

NNI interconnection is encapsulation independent, but Ethernet and Frame Relay are commonly used.[3]

See also

References
  1. Kennedy, Shelly. "User Network Interface ( UNI )". The University of Oklahoma. College of Business Administration. Retrieved 11 December 2018.
  2. Asatani, K (6 August 2002). "Network node interface for new synchronous digital networks-concepts and standardization". IEEE Global Telecommunications Conference and Exhibition. Communications for the Information Age. 1: 118–124. doi:10.1109/GLOCOM.1988.25822.
  3. MEF Forum 2016. "Ethernet Interconnection Point (EIP): An ENNI Implementation Agreement" (PDF). MEF. MEF Forum 2016. Retrieved 11 December 2018.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.