Jean-Baptiste Leblond

Jean-Baptiste Leblond, born on 21 May 1957 in Boulogne-Billancourt, is a materials scientist, member of the Mechanical Modelling Laboratory of the Pierre-et-Marie-Curie University (MISES) and professor at the same university.[1]

Biography

Leblond attended his scientific preparatory classes, notably in the special M' mathematics class at the Lycée Louis-le-Grand and was admitted to the École normale supérieure de la rue d'Ulm, mathematics option, in 1976. He then joined the Corps des mines and became a doctor of physical sciences.

Scientific fields covered
  • Modeling of solid-state transformation kinetics in steels and alloys. Leblond's classical model[4] is essentially based on the notion of phase proportions at thermodynamic equilibrium, and the deviation from these proportions.
  • Theoretical analysis and modelling of the transformation plasticity of steels and alloys, based on the mechanism proposed by Greenwood and Johnson in 1965. The first classical approach to Leblond's problem[5] has recently been taken up again[6] by combining the theories of homogenization and boundary analysis.
  • Numerical simulation of thermomechanical treatments of steels and alloys (welding, quenching, etc.). Initially limited to the solid part of the structure, these simulations have been extended to the modelling of fluid flow and heat in the molten bath, including in particular the effects of surface tension.[7] [8]
  • Crack propagation paths in linear mechanics of brittle fracture, 2D and 3D. One of the most difficult issues examined by Leblond is that of interpreting and explaining the fragmentation of crack fronts in brittle materials under partial I+III or general I+II+III mixed mode loading.[9]
  • Ductile failure of metals. The problems examined include the shape effects of cavities[10] [11] [12] and the theoretical analysis and modelling of their coalescence, a prelude to the formation or propagation of a macroscopic crack. Reference[13] provides a summary of the work.
  • Diffusion/reaction phenomena in solids, with particular application to the internal oxidation of metal plates. A major advance consists in an ab initio prediction, without adjustable parameters, of the transition from internal to external oxidation (limited to the surface of the material).[14][15]
  • Advanced numerical methods in solid mechanics and metallurgy. Special efforts have been devoted to the development of Gaussian pointless finite element methods, including a nodal integration technique with various advantages.

Leblond's kinetic theory

This is an approach established by Leblond in his work on phase transformations.

The theory proposes an evolutionary model to quantify the composition of the different phases of a crystalline material during heat treatment.

The method is based on experimentally established CRT (Continuous Cooling Transformation) diagrams to compose TTT (Time-Temperature-Transformation) diagrams, which are widely used for numerical simulation or for the manufacture of industrial parts.

The theory posits the equivalent volume fraction of a constituent yeq as the stationary solution of the evolution equations describing the phase change kinetics:

stationnart phase

We then suppose in anisothermal condition that the real fraction y is close to yeq, it is then possible to approximate the real value Y by a Taylor development at order 1:

The evolution is given by :

τ is determined on the one hand by the incubation period (critical time) and on the other hand by the cooling rates T.

There are also other formalisms such as the theory of Kirkaldy, Johnson-Mehl-Avrami or Waeckel. One of the most classical, quite old, is that of Johnson-Mehl-Avrami. The model proposed by Jean-Baptiste Leblod is in fact based on this classical model by generalizing it on two points: 1) it considers any number of phases and transformations between these phases, and not just two phases and a single transformation; 2) the transformations can remain, after an infinitely long time, partial, and not necessarily complete as in the Johnson-Mehl-Avrami model (this is linked to the existence, in the new model, of fractions "at equilibrium" of the phases towards which the system evolves after an infinite time, not necessarily equal to 0 or 1 but which can take any value between these limits).

The Leblond model is designed for applications in the thermometallurgical treatment of steels; this explains its success with the modellers of these treatments.

References
  1. "Site internet JB Leblond".
  2. "Académie des sciences".
  3. "Académie des technologies".
  4. J.B. Leblond, J. Devaux, « A new kinetic model for anisothermal metallurgical transformations in steels including effect of austenite grain size », Acta Metallurgica, 32, 1984, p. 137-146
  5. J.B. Leblond, J. Devaux, J.C. Devaux, « Mathematical modelling of transformation plasticity in steels - I: Case of ideal-plastic phases », International Journal of Plasticity, 5, 1989, p. 551-572
  6. Y. El Majaty J.B. Leblond, D. Kondo, « A novel treatment of Greenwood-Johnson's mechanism of transformation plasticity - Case of spherical growth of nuclei of daughter-phase », Journal of the Mechanics and Physics of Solids, 121, 2018, p. 175-197
  7. J.B. Leblond, H.A. El-Sayed, J.M. Bergheau, « On the incorporation of surface tension in finite element calculations », Comptes Rendus Mécanique, 341, 2013, p. 770-775
  8. Y. Saadlaoui E. Feulvarch, A. Delache, J.B. Leblond, J.M. Bergheau (2018). "A new strategy for the numerical modeling of a weld pool". Comptes Rendus Mécanique (in French). 346 (11): 999–1017. doi:10.1016/j.crme.2018.08.007.CS1 maint: uses authors parameter (link)
  9. J.B. Leblond, A. Karma, V. Lazarus, « Theoretical analysis of crack front instability in mode I+III », Journal of the Mechanics and Physics of Solids, 59, 2011, p. 1872-1887
  10. M. Gologanu, J.B. Leblond, J. Devaux, « Approximate models for ductile metals containing non-spherical voids - Case of axisymmetric prolate ellipsoidal cavities », Journal of the Mechanics and Physics of Solids, 41, 1993, p. 1723-1754
  11. M. Gologanu, J.B. Leblond, G. Perrin, J. Devaux, Recent extensions of Gurson's model for porous ductile metals, in: Continuum Micromechanics, P. Suquet, ed., Springer-Verlag, 1997, p. 61-130
  12. L. Morin, J.B. Leblond, V. Tvergaard, « Application of a model of plastic porous materials including void shape effects to the prediction of ductile failure under shear-dominated loadings », Journal of the Mechanics and Physics of Solids, 94, 2016, p. 148-166
  13. A. Benzerga, J.B. Leblond, A. Needleman, V. Tvergaard, « Ductile failure modeling », International Journal of Fracture, 201, 2016, p. 29-80
  14. J.B. Leblond, « A note on a nonlinear variant of Wagner's model of internal oxidation », Oxidation of Metals, 75, 2011, p. 93-101
  15. J.B. Leblond, J.M. Bergheau, R. Lacroix, D. Huin, « Implementation and application of some nonlinear models of diffusion/reaction in solids », Finite Elements in Analysis and Design, 1, 32, 2017, p. 8-26
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.