Improved Load Bearing Equipment
The Improved Load Bearing Equipment (ILBE) is a United States Marine Corps program that had included individual load carriage equipment, individual hydration systems (Source One Hydration) and individual water purification.
Since the rucksack was the first component of the program to be issued to Marines, the rucksack is commonly referred to as simply the ILBE. The ILBE rucksack was designed to replace the long existing All-purpose Lightweight Individual Carrying Equipment (ALICE) and newer Modular Lightweight Load-carrying Equipment (MOLLE) packs.
Design
The ILBE was designed during the Law Enforcement and Armed Forces (LEAF) program by Arc'teryx, and later manufactured by Propper.
The backpack is made from 725 Denier Cordura material (725 D), with the MARPAT camouflage pattern printed onto it. The pack is also covered with a wide grid of the Pouch Attachment Ladder System (PALS), for the attachment of smaller modular pouches. It includes a main pack, a detachable assault pack and a 100-ounce (3 litre) water reservoir as part of the hydration system.
The ILBE can hold up to 120 pounds (54 kg) of weight, and has room for both 60mm and 81mm mortar rounds outside the main pack. Specialized bags and pouches for corpsmen and reconnaissance units are also available.[1][2]
The ILBE system includes 6 types of packs:
- Main Pack (75L)
- Recon Main Pack (90L)
- Assault Pack (27L)
- Corpsman Assault Pack (39L)
- Recon Assault Pack (39L)
- Recon Accessory Pouch (5L)
- Hydration System (3L)
These packs are paired with waterproofing bags in 56L, 65L, and 9L capacities.
The assault packs, with their smaller volume and lower weight capacities, are intended for wear in combat, while the larger main packs are intended to carry everything needed by a unit on the march. A set of packs typically consists of a main pack, an assault pack, and a hydration system. These three items together cost more than $600 when the ILBE system was first fielded, making it the most expensive single soldier pack system used by the US armed forces.[3]
Criticism
Because the ILBE was fielded before the creation of the Modular Tactical Vest (MTV), the pack did not integrate well with the fighting system at the time (such as the Interceptor Body Armor), and excessive stress in conjunction with the wearing of body armor could cause discomfort and injury.
Future
The Marine Corps Systems Command (MARCORSYSCOM) announced that a replacement was forthcoming in 2009,[4] with possible replacements, including two entries from Mystery Ranch, Granite Gear, and the United States Army improved variant of MOLLE.
In the year 2011, the Corps had finished testing and evaluation, releasing a solicitation for prototypes under the designation Family of Improved Load Bearing Equipment (FILBE), outlining design requirements that are similar to the improved MOLLE system.[5][6][7][8]
See also
References
- "Advanced Planning Brief for Industry" (PDF). 2007-05-10. Archived from the original (PDF) on 2011-09-27. Retrieved 2008-11-23.
- Rottman, Gordon (2011). The M16. p. 71.
Marines used MOLLE until fielding the Improved Load Bearing Equipment (ILBE) in 2005 with three two-magazine pouches and a...
- "Salute ArcTeryx — all analysis of ILBE Pack System". I Military Pack. July 3, 2016. Retrieved August 2, 2016.
- McCullough, Amy; Curtis, Rob (December 14, 2009). "Replacing Your Pack: Corps to consider range of rucks for ease of use, better wear". Marine Corps Times. pp. 22–23.
- "Solicitation Number M6785411R3019; USMC Pack". Marine Corps Systems Command. Federal Business Opportunities. April 8, 2011. Retrieved May 6, 2011.
- Lamothe, Dan (December 8, 2010). "Corps looks to field 100,000 new packs". Marine Corps Times. Archived from the original on January 18, 2012. Retrieved May 6, 2011.
- "Breaking News – USMC to Buy New Pack". Soldier Systems Daily. April 8, 2011. Retrieved May 6, 2011.
- Sanborn, James K. (May 9, 2011). "Your New Pack: Testing Finished for Unpopular ILBE's Replacement". Marine Corps Times. p. 16.
External links
- Olive-drab.com: "ILBE Improved Load Bearing Equipment" article describing ILBE