Dynamic hip screw

Dynamic hip screw (DHS) or Sliding Screw Fixation is a type of orthopaedic implant designed for fixation of certain types of hip fractures which allows controlled dynamic sliding of the femoral head component along the construct. It is the most commonly used implant for extracapsular fractures of the hip,[1] which are common in older osteoporotic patients. There are 3 components of a dynamic hip screw, including a lag screw (inserted into the neck of the femur), a sideplate and several cortical screws (fixated into the proximal femoral shaft). The idea behind the dynamic compression is that the femoral head component is allowed to move along one plane; since bone responds to dynamic stresses, the native femur may undergo primary healing: cells join along boundaries, resulting in a robust joint requiring no remodeling.

Dynamic hip screw

Additional images

Fracture supported by dynamic hip screw

References

Sambandam, Senthil Nathan; Chandrasekharan, Jayadev; Mounasamy, Varatharaj; Mauffrey, Cyril (2016-05-01). "Intertrochanteric fractures: a review of fixation methods". European Journal of Orthopaedic Surgery & Traumatology. 26 (4): 339–353. doi:10.1007/s00590-016-1757-z. ISSN 1432-1068. PMID 27028746.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Sambandam, Senthil Nathan; Chandrasekharan, Jayadev; Mounasamy, Varatharaj; Mauffrey, Cyril (2016-05-01). "Intertrochanteric fractures: a review of fixation methods". European Journal of Orthopaedic Surgery & Traumatology. 26 (4): 339–353. doi:10.1007/s00590-016-1757-z. ISSN 1432-1068. PMID 27028746.