Cunife

Cunife is an alloy of copper (Cu), nickel (Ni), iron (Fe), and in some cases cobalt (Co). The alloy has the same linear coefficient of expansion as certain types of glass, and thus makes an ideal material for the lead out wires in light bulbs and thermionic valves. Fernico exhibits a similar property. It is a magnetic alloy and can be used for making magnets.

Not to be confused with kunifer.

Cunife has a magnetic coercivity of several hundred oersteds. Unlike most high coercivity magnetic materials which are hard and brittle and need to be cast into shape, cunife can be drawn into thin wires. Wires as thin as five thou can be produced this way.[1] Thicker rods of the material can be threaded which is also something that is not possible with the more commonly used magnetic materials.[2]

In the early 1970s, Fender Musical Instruments Corporation used Cunife magnets in their Wide Range humbucking pickups, however they discontinued use, due to Cunife being hard to source. Fender began producing cunife pickups again in 2020.[3]

Typical compositions

Given in weight %

Cu Ni Fe Co
Cunife 1 60% 20% 20% -
Cunife 2 60% 20% 17.5% 2.5%

References
  1. Irvin L. Cooter, Robert E. Mundy, "Cunife wire magnets of small size", Journal of Research of the National Bureau of Standards, vol. 59, no. 6, pp. 379-382, December 1957.
  2. Seth Lover, interviewed 1992 by Tony Bacon
  3. "Fender American Original '70s Telecaster Custom review". Music Radar. Future Publishing Limited. Retrieved 24 August 2020.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.