Cloth modeling

Cloth is a woven or felted fabric made from wool, cotton, or a similar fiber. Cloth modeling is the term used for simulating cloth within a computer program, usually in the context of 3D computer graphics. The main approaches used for this may be classified into three basic types: geometric, physical, and particle/energy.

Background

Most models of cloth are based on "particles" of mass connected in some manner of mesh. Newtonian Physics is used to model each particle through the use of a "black box" called a physics engine. This involves using the basic law of motion (Newton's Second Law):

In all of these models, the goal is to find the position and shape of a piece of fabric using this basic equation and several other methods.

Geometric methods

André Weil pioneered the first of these, the geometric technique, in 1986.[1] His work was focused on approximating the look of cloth by treating cloth like a collection of cables and using Hyperbolic cosine (catenary) curves. Because of this, it is not suitable for dynamic models but works very well for stationary or single-frame renders.[1] This technique creates an underlying shape out of single points; then, it parses through each set of three of these points and maps a catenary curve to the set. It then takes the lowest out of each overlapping set and uses it for the render.

Physical methods

The second technique treats cloth like a grid work of particles connected to each other by springs. Whereas the geometric approach accounted for none of the inherent stretch of a woven material, this physical model accounts for stretch (tension), stiffness, and weight:

Now we apply the basic principle of mechanical equilibrium in which all bodies seek lowest energy by differentiating this equation to find the minimum energy.

Particle/energy methods

The last method is more complex than the first two. The particle technique takes the physical methods a step further and supposes that we have a network of particles interacting directly. Rather than springs, the energy interactions of the particles are used to determine the cloth's shape. An energy equation that adds onto the following is used:

  • The energy of repelling is an artificial element we add to prevent cloth from intersecting itself.
  • The energy of stretching is governed by Hooke's law as with the Physical Method.
  • The energy of bending describes the stiffness of the fabric
  • The energy of trellising describes the shearing of the fabric (distortion within the plane of the fabric)
  • The energy of gravity is based on acceleration due to gravity

Terms for energy added by any source can be added to this equation, then derive and find minima, which generalizes our model. This allows for modeling cloth behavior under any circumstance, and since the cloth is treated as a collection of particles its behavior can be described with the dynamics provided in our physics engine.

See also

Notes
  1. Tutorial on Cloth Modeling
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.