Bugatti 18/3 Chiron

The Bugatti 18/3 Chiron is a 1999 concept car developed by French automobile manufacturer Bugatti Automobiles and designed by Fabrizio Giugiaro of Italdesign.[3] Powered by a 6.3 L W18 engine, it is a 2-seater mid-engine coupé. The 18/3 Chiron was the last in a trio of Bugatti concept cars by Italdesign, after the 1998 EB 118 coupé and the 1999 EB 218 saloon.

For other uses, see Bugatti Chiron (disambiguation).
Bugatti 18/3 Chiron
Overview
ManufacturerBugatti Automobiles S.A.S.
Production1999
AssemblyMoncalieri, Italy (Italdesign)
DesignerFabrizio Giugiaro at Italdesign Giugiaro under Hartmut Warkuß[1]
Body and chassis
Classconcept car
Body style2-door coupé
LayoutMid-engine, four-wheel drive
Related
Powertrain
Engine6.3 L W18
Transmission5-speed manual [1]
Dimensions
Wheelbase2,650 mm (104 in) [2]
Length4,420 mm (174 in)[2]
Width1,994 mm (78.5 in)[2]
Height1,150 mm (45 in)[2]

The Chiron name was used again on the 2016 successor to the Bugatti Veyron.[4]

Name origin

The 18/3 Chiron is named after Bugatti race driver Louis Chiron, while the "18/3" prefix stands for the engine's 18 cylinders distributed into three banks of six cylinders each.[5]

Description

The Bugatti 18/3 Chiron premiered at the Frankfurt Motor Show in September 1999.[6]

Design

Fabrizio Giugiaro of Italdesign was responsible for the design with input from Hartmut Warkuß from the Volkswagen design centre in Wolfsburg. In creating a logical successor to the EB110, they had the unique opportunity to style Bugatti's possible flagship model.

Rear three-quarters view
Front view

Airflow management and aerodynamics were key considerations in the exterior design. Below the traditional horseshoe radiator grille a large opening provides enough air to the radiators of the 6.3-litre engine; much of this air is extracted though vents located forward of the front wheel openings. A similar system is used on the side of the car to cool the rear brakes. At the rear a diffuser was integrated in the rear bumper. A retractable rear wing deploys at high speeds, much like on the EB 110. The 20-inch eight-spoke wheels resemble the cast aluminium wheels first found on Louis Chiron's Type 35B. The stylish body work was made from carbon fibre. Lighting on both ends of the car was cutting edge at its time, including triple Xenon headlights and elongated turn signals at the rear who also served as the tail lights of the car, two double exhaust pipes were visible through a large air extractor at the rear which also served as the underbody spoiler. Inside, the cabin is upholstered in Blu Pacifico and Sabbia leather with aluminium accents as well as a removable watch on the passenger side.

Important design elements such as the classic horse shoe grille, inset front lights, converging front hood and an exposed intake plenum would eventually be integrated into the production Veyron EB 16.4.

Engine and chassis
The exposed inlet manifolds of the W18 engine

In order to construct a fully working prototype, Bugatti utilised the chassis and four-wheel drive system sourced from the Lamborghini Diablo VT in the 18/3 Chiron.

The 18/3 Chiron uses the same Volkswagen-designed W18 engine that first appeared on the 1998 EB 118 and the 1999 EB 218 concept cars. As on the other two cars, the Chiron's W18 has a power output of 555 PS (408 kW; 547 hp) and 650 N⋅m (479 lb⋅ft) of torque. The 18/3 Chiron's W18 engine is composed of three banks of six cylinders with a sixty degree offset between each cylinder bank. In contrast, the W16 engine in Bugatti Automobile's first production car, the 2005 Veyron EB 16.4 features a four-bank configuration of four cylinders each, totalling sixteen cylinders.

Performance

The 18/3 Chiron could accelerate from 0–97 km/h (0–60 mph) in 5.3 seconds and could reach a top speed of approximately 330 km/h (205 mph). But these numbers were never verified.

References
  1. Nick D. (6 April 2016). "Bugatti 18/3 Chiron details". Retrieved 28 January 2018.
  2. "Bugatti 18/3 Chiron Dimensions". Retrieved 28 January 2018.
  3. John, Lamm. The supercar: an evolution of speed. p. 332. ISBN 9780760333839.
  4. Kacher, Georg (10 December 2014). "Deep Dive: The 288-mph Bugatti Chiron". automobilemag.com.
  5. European Car, Volume 37, Issues 7-12. Argus Publishers. 2006. p. 106.
  6. Bianco, Piero (16 September 1999). "Belle idee in stile italiano". La Stampa (in Italian). p. 35. Retrieved 6 July 2015.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.