Average Run Rate method

The Average Run Rate (ARR) method was a mathematical formulation designed to calculate the target score for the team batting second in a limited overs cricket match interrupted by weather or other circumstances. Often matches interrupted by weather would use reserve days, bowl outs, or be replayed on another date, but if logistics did not allow these, the ARR method would be used.

The ARR method was used from the start of one-day cricket in the 1950s and 1960s until it was replaced by the Most Productive Overs method in 1991.[1]

Calculation

If an interruption means that the team batting second loses some of their overs, their target score is adjusted as follows.[2]

This means that Team 2 just has to match the average run rate achieved by Team 1 in the overs it has available. For example, if Team 1 made 250 in their 50 overs, which is an ARR of 5 runs per over, and Team 2's innings is reduced to 25 overs, Team 2's new target is (5 x 25) + 1 = 126.[1]

This formula can alternatively be written as:

In other words, the target is reduced in proportion to the loss in overs. Using the same example as above, with this formula the new target for Team 2 is (250 x 25/50) + 1 = 126.

Criticisms

The ARR method frequently alters the balance of the match, usually in favour of the team batting second (Team 2).[3]

There are four intrinsic flaws in the method:

  • Firstly, it is easier to maintain a given run rate for a reduced number of overs: since less care needs to be taken to preserve wickets, an adjusted target is easier to achieve.
  • Secondly, the method takes no consideration of wickets lost, but simply reflected how quickly they were scoring when the match was interrupted. This means if Team 2 were 126–9 from 25 overs in reply to a score of 250 from 50 overs, they would be declared the winner. [4]
  • Thirdly, there is no compensation to Team 1 if they unexpectedly lose some of their final overs which they were expecting to be able to score from.
  • Fourthly, if Team 2's innings is interrupted, the current match situation is irrelevant in the calculation of the new target, meaning the balance of the match will be changed.

Two subsequent modifications were used: increasing the required run rate by 0.5% for each over lost, and calculating the target using the run rate after excluding maiden overs, with the target given by the next highest integer. While these modifications reduced Team 2's advantage, the second also effectively penalised Team 2 for good bowling, and they failed to address the intrinsic flaws of the method.

Notable matches decided by ARR
  • England v Sri Lanka in the 1987 Cricket World Cup. After England scored 296 from 50 overs, rain reduced Sri Lanka's innings to 45 overs, giving them a revised target of 267 (296 x 45/50 = 266.4). Sri Lanka finished at 158-8.
In this match, the later Duckworth-Lewis-Stern method would have reset Sri Lanka's target to 282.
  • In the third final of the 1988-89 World Series Cup, Australia scored 226 from 38 overs. Chasing 227 to win, West Indies were 47−2 after 6.4 overs when rain stopped play for 85 minutes. At this point they needed 180 runs from 31.2 overs (a required RR of 5.74). When play restarted, West Indies' innings was reduced to 18 overs, giving a revised target of 108 (226 x 18/38 = 107.1), so they needed 61 runs from 11.2 overs (a required RR of 5.38). The West Indies won the match (and the competition) with 4.4 overs remaining and eight wickets in hand.[5]
This revised target gave the West Indies a major advantage as it significantly reduced the number of overs they needed to maintain a given run rate, and reduced the required run rate. Australian fans booed this conclusion, and the Average Run Rate was criticised by the media and Australian captain Allan Border, which led to Australia developing the Most Productive Overs method. In this match, the later Duckworth-Lewis-Stern method would have increased the West Indies' target to 232 (to take into account a two-hour rain delay during Australia's innings), and then revised the target to 139 after the second interruption.

References
  1. Duckworth/Lewis, Q2. "The D/L method: answers to frequently asked questions". ESPN Cricinfo. Retrieved 16 September 2017.
  2. Brooker, S.; Hogan, S. (2010). "How fair is the Duckworth/Lewis adjustment in one day international cricket?" (PDF): Section 2.1. Cite journal requires |journal= (help)
  3. Duckworth, F.C.; Lewis, A. J. (1998). "A fair method for resetting the target in interrupted one-day cricket matches". Journal of the Operational Research Society. 49 (3): 220–227. doi:10.1057/palgrave.jors.2600524.
  4. Duckworth, F.C. (2008). "The Duckworth/Lewis method: an exercise in Maths, Stats, OR and communications" (PDF). MSOR Connections. 8 (3): 11–14.
  5. 3rd Final, 1988/89 Benson and Hedges World Series Cup
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.