Aero Eli Servizi Yo-Yo 222
The Aero Eli Servizi Yo-Yo 222 (sometimes written YoYo) is an Italian helicopter designed and produced by Aero Eli Servizi of L'Aquila. The aircraft is supplied complete and ready-to-fly.[1]
Yo-Yo 222 | |
---|---|
Role | Helicopter |
National origin | Italy |
Manufacturer | Aero Eli Servizi Costruzioni Aeronautiche |
Status | In production (2015) |
Design and development
The Yo-Yo 222 was initially designed for a higher gross weight of 495 kg (1,091 lb), but later versions were lightened to allow a gross weight of 450 kg (992 lb) to qualify under the European Class 6 microlight helicopter rules. The aircraft features a single main rotor and tail rotor, a two-seats-in side-by-side configuration enclosed cockpit, skid landing gear and an American-made four-cylinder, air-cooled, four stroke 172 hp (128 kW) Lycoming O-320 engine.[1]
Greatly resembling the Robinson R22, reviewer Werner Pfaendler, describes it as "obviously the result of a close look at the world's bestselling two-seater helicopter, the R22."[1]
For lightness the aircraft fuselage is made with extensive use of carbon fiber reinforced polymer and fibreglass. Its two-bladed rotor has a diameter of 7.66 m (25.1 ft). The initial version of the aircraft has a typical empty weight of 322 kg (710 lb) and a gross weight of 495 kg (1,091 lb), giving a useful load of 173 kg (381 lb). With full fuel of 68 litres (15 imp gal; 18 US gal) the payload for the pilot, passenger and baggage is 124 kg (273 lb).[1]
Specifications (Yo-Yo 222)
Data from Tacke[1]
General characteristics
- Crew: one
- Capacity: one passenger
- Empty weight: 322 kg (710 lb)
- Gross weight: 495 kg (1,091 lb)
- Fuel capacity: 68 litres (15 imp gal; 18 US gal)
- Powerplant: 1 × Lycoming O-320 four cylinder, air-cooled, four stroke aircraft engine, 128 kW (172 hp)
- Main rotor diameter: 7.66 m (25 ft 2 in)
- Main rotor area: 46 m2 (500 sq ft)
Performance
- Maximum speed: 300 km/h (190 mph, 160 kn)
- Cruise speed: 280 km/h (170 mph, 150 kn)
- Disk loading: 10.8 kg/m2 (2.2 lb/sq ft)